peripheral equipment (e.g. heating, conveying, drying) used for sale (606)

Weibert RAV 34 Feeder Large tripod projection 1100mm 3 feed rollers 120 x 60mm 4 Speeds 750W/ 400V Weight: 27+34kg G&RO-14-9933

RLA 210 Clean air dedusters Metal fan wheel Inspection opening for cleaning the bypass filter manual cleaning Extraction of wood chips Not suitable for grinding dust mobile very quiet High extraction performance with small footprint Suction nozzle 200mm Nominal volume flow 2262 m³/h Volume flow max. 3700 m³/h Negative pressure at Vnenn: 2482 Pa Filter area 22m² Dust class M Residual suction content H3 Chip drum volume: 2x165l LxWXH 1755 x 830 x 1800mm Motor 3kW 400V 50Hz Weight 259kg G&STÜ-5132100

SF 444n-8 Feed apparatus standard with 8 speeds 3.5-5-7-10-12-17-26-34 m/min ideal guidance of the workpiece thanks to 4 roller system every working position can be easily adjusted via two-rod tripod right/left run 2 step motor Precision gearbox ensures precisely uniform feed speed and long service life G&HM-SF444-8

ABS 2480 Aspirator N E U MASCHINE ! Suction system ABS 2480 400V 2 hp 300 L chip sack Suction capacity of 2480 m3/h 2 100 intake connections Weight 51 kg METAL WINGS! Driving equipment! G&HM-ABS2480

ABS 3880 Suction system 2 sack ABS 3880 2x300L Suction capacity 3880m3/h 3x100mm 2.3 hp S1/ 3.5 hp S6

ASA 3303 Raw air extraction system Rated power 3260 m3/h, Filter area 2 x 3.6 m2, Power 400 V 50 Hz 1.5 kW, 2 dust bags G&STÜ-5123303

Weibert RLA 125 Clean air extraction system Rated volume flow: 1095 m3/h Minimum volume flow: 884 m3/h Max Vacuum: 2220 Pa Chip collection volume max.: 255 ltr. Engine power: 2.2kW Connection 50Hz: 400V Weight: 194 kg Dimensions in mm: 1100 x 830 x 1650 Suction nozzle diameter: 125 mm Height lower edge suction nozzle to the ground: 850 mm Max sound pressure level 73 db (A) G&STÜ-5131250

SAA 902 Aspirator Fan wheel in bucket form Plastic fan wheel and housing Rated volume flow 1200 m3/h Vacuum max. 1100 Pa Suction nozzle diameter 100mm LxWxH 900 x 500 x 1550mm Weight 19kg Engine 230V 50Hz 0.55kW G&STÜ-5923902

1903 ASA Aspirator Rated volume flow 1900 m3/h Low pressure max. 1700 Pa Filter area 1.92m2 Chip collection volume 110l Suction nozzle diameter input 203mm Suction nozzle diameter output 2x 100mm LxWxH 1000 x 500 x 2100mm Weight 39kg Engine 400V 50Hz 1.5kW G&STÜ-5128193

- Length (m) 5.7 - Width (m) 1 - Roll width (cm) 85 - Height (cm) 95

Level compressor 300 litre fuel tank 11 HP

RLA 160 Extraction system Dust nozzle diameter: 160 mm Engine: 2.2 kW 400 V 50 Hz Nominal volume flow at the nozzle: 1448 m ³/h Maximum flow rate: 2400 m3/h Filter surface: 9,21 m² Dust class M Residual dust content: H3 Chip collecting volume: 2 x 165 (193) l The maximum sound pressure level: 73 dB (A) Dimensions (L x W xH): 1755 x 830 x 1654 mm Weight: 267 kg G & pieces 5131620

Colour JET 2 Paint mist extraction Rated motor power: 0,75 / 2,1 kW Engine speed: 96 min 0/1,430 Air volume: 3,000 / 6,800 m ³/h Effective pressure: 400 / 500 PA Dimensions closed (W/H/D): 1,012 x 1.405 x 943 mm Folded dimensions (W/H/D): 1,897 x 1.405 x 1,166 mm Pre-and fine filter filter area: 1 m² Connection diameter: 300 mm Switch zweistuftig Compact construction, space-saving Powerful, high suction power,. low operating costs Easy maintenance, long filter life Universally applicable, variable accessories High flexibility Mobile design Suction technology with front plate system G & ALKO 19562801

Weibert SA 205 Extraction system N E U machine extraction system SA 205 400V 2.2 KW (3 HP) Flow max. 2900 m³/h 2 dust nozzle 120 mm 1.7 m² filter area 1 chip bag 300 litres Fahrbahr Weight 70 kg G & WJ-SA-205

Portable fan / exhaust fans Stratos Ventilatoren GmbH Fan with ABB electric motor 0,75 KW, 400V, 50 Hz, 1,9A, 2850U/min Used

Suction with electric motor,intake opening D=150mm, blow-out D=115mm, motor 0.6KW

Year of construction 1994 Stack mass: Depth - 2.40 meters High - 3.00 mtr Long - 11.50 meters Drying capacity - са.75 m3 gross Fans - 7 х 0.75 квт Chamber construction - container construction is not desmantlebel! Interior trim - Aluminium welded 2.0 mm Insulation - rock wool 80 mm Outdoor installation Electrical cabinet with computer control system MB-400 Very good condition

Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition

Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition

Complete boiler system Weiss Year of construction - 1989 Power - 2500 kW For very wet chips incl. bark Water content - about 12500 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulical ash removal Cyclon for dust separation Complete controling system Well maintained, excellent condition

Complete boiler system Kohlbach Year of construction - 1990 Power - 4000 kW For very wet chips incl. bark Water content - about 15000 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulically ash removal Cyclone for dust separation Electrostatic precipitator Complete controling system Well maintained, excellent condition

ALMAB stacking line from a planing line 200m/mim for planers / boards 6m Dujbm Ejv T Nblepdgyer Manufacturer: ALMAB Sweden Year of construction 2002 Speed for a feed of 200m / min ! Fully functional For max packages: 1.6m x 2.4m Length approx. 5.3m Height approx. 2.8m 6 lifting arms 1.60m long ( not mounted on the photo ) Width of the cross transport: approx. 2.4m Cross transport Electric lift table Weight 6.0 t

Code: 0467 Brand: FELDER - AUSTRIA Model: RL 160 - CE Standard Mobile industrial clean-air dust collector – CE Standard Max air flow rate 3200 m³/h Nominal air flow rate 20 m/s 1450 m³/h Nominal vacuum 20 m/s 2400 Pa Suction connection diameter 160 mm Cartridge filter Sound pressure level 70 dB Chip collection capacity 2 x 200 l Powder fire extinguisher Overall dimensions mm 1765 x 898 x 2065 h

NEW WEINIG BF4 600/1500 Compartment Packing Station / Loading Unit / Buffer / Magazine for finger-jointing lines Maximum package width of 600 mm Maximum inlet length of 1,500 mm This feeding device has never been used before, is still on the original pallet and is therefore new! Subject to changes, errors and prior sale.

TECHNICAL DATA: Working length: min. 350 mm – max. 3000 mm Working width: min. 20 mm – max. 230 mm Element thickness: min. 12 mm – max. 70 mm Feed speed: 10 to 50 m/min Installed power: 1.5 kW

Code: 0389 Brand: ISVE Model: ESC JUNIOR 5 - CE Standard Vacuum dryer for drying timber planks, with top opening particularly suitable for carpenter workshops with problems of space - CE Standard Features: Top opening means that the whole length of the autoclave can be used without having to extract the carriage, thus drastically reducing the overall size The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks where in other drying systems is quite frequent The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the stea ...

Code: 0306 Brand: VM Model: 2/18 Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves N° 2 collection bags Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h

Steam tank with pneumatic opening - Lenght mm. 2100 - Diam. mm. 700

Processing dust extraction substation COMPOSED OF: - Centrifugal dust extraction fan - N. 132 sleeves diam. 120 H 3000 mm. with baskets - Suction capacity 20,000 m3/h - Material discharge system with rotary valve - Bag cleaning system with blowers controlled by a cyclic economizer - Motor vibrator on discharge hopper - CAM Logic on the discharge hopper for clogging level signalling - Electrical control panel - Centrifugal fan mod. EUC 801 30 kW i14

TECHNICAL DATA: 03 Reels Installed power: 0.6 kW