peripheral equipment (e.g. heating, conveying, drying) used for sale (611)

11 KW

2.55 KW

4.3 KW 2850 rpm 4240 m3/ min

4.3 KW 2850 rpm 2440 m3/ min

6.69 KW 3000 rpm 73 m3/ min

Specifications: Vnenn: 2,950 cbm/h Vmin: 2.251 cbm/h Suction nozzle Ø 200 mm Motor power 3.7 kW Rated speed 2,805 rpm Rated current 7.5 A Frequency 50 Hz, 3 phases Test class H2 Vacuum at Vmin at the interface between dust collector and dust generator (4 m hose) with suction nozzle Ø 200 mm = 2,200 Pascal = 22, with suction nozzle Ø 180 mm = 2,500 Pascal = 25 Filter cleaning by compressed air (to be triggered manually, compressed air connection on site, max. 4 bar) Delivery incl. various chip collection bags

Centrifugal fan / blower / fan Hürner-Funken made of chemical-resistant plastic The housing and impeller of the fan are made of chemical-resistant plastic and suitable for aggressive media in the process exhaust air. Manufacturer Hürner-Funken GmbH 35325 Mücke-Atzenhain Type 16-RU 315 MN/0/1420 Factory No. 2-29191/00 Built in 1999 Air capacity / volume flow 2166 / 1900 m³/h Motor power 1.50 KW, 1619/1420 rpm. Pressure difference 1287/990 Pa Conrad Meisenheim electric motor Type DR 90 L-4 No. 304987 1.5 KW, 400/230 V star/delta, 3.4/6 A, 50 Hz Iso F, IP55 1420 rpm, cos phi 0.82 Chemically resistant, corrosion resistant. The centrifugal fans made of plastic are specially designed for pumping chemically aggressive exhaust air. They are characterized by the highest corrosion resistance. In addition, they achieve high volume flows and Pressure differences wit ...

Finnrose Plate Stacker Type ST-10-170 Electronic For automatic stacking (e.g. on roller conveyor for further transport) Of plate-shaped workpieces, doors, or woods Was used to stack timber behind a four-sided planer Workpiece size Maximum 2500 mm x 800 mm Minimum 400 mm x 250 mm Weight maximum per workpiece 80 kg Capacity 20 workpieces per minute, depending on the workpiece size Maximum stacking height above floor 1800 mm Belt drive 0.18 kW Roller drive 0.09 kW Compressed air consumption per stroke 3.9 NL Instruction manual and circuit diagram available Weight approx. 600 kg Dimensions 2800 mm x 2200 mm x H 1100 mm (H max. 1800 mm)

table length: 1300 mmtable width: 800 mmstroke height: 1010 mmweight max. in kg: 2000 kg: 190 mmconnected load frequency: 400 Vtotal power requirement: 0,75 kWstroke speed - idle stroke upwards: 40 sek.stroke speed - idle stroke downwards: 30 sek.weight of the machine ca.: 0,28 tdimensions of the machine ca.: 1,3 x 0,8 x 0,23 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mmtable width: 1500 mmstroke height: 1900 mmweight max. in kg: 3000 kgtotal power requirement: 1,5 kWstroke speed - idle stroke upwards: 55 sek.stroke speed - idle stroke downwards: 30 sek.connected load frequency: 400 Vweight of the machine ca.: 0,650 tdimensions of the machine ca.: 2,2 x 1,5 x 0,3 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mmtable width: 1500 mmstroke height: 1850 mmweight max. in kg: 2000 kg: 260 mmtotal power requirement: 1,5 kWstroke speed - idle stroke upwards: 40 sek.stroke speed - idle stroke downwards: 30 sek.connected load frequency: 400 Vweight of the machine ca.: 0,45 tdimensions of the machine ca.: 2,2 x 1,5 x 0,26 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 71 m², 825 kg, 2640 mm

Clean Air Dust Extractor RL350 Extraction connection on the right Nominal volume 8,000m³/h H3 GS dust-tested Jet cleaning Chip container capacity 500l Electrics RL350 FU 11kW Extinguishing device powder extinguisher 12kg More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group

Key data: 71 m², 825 kg, 2640 mm

Clean Air Dust Extractor RL350 Extraction connection on the right Nominal volume 8,000m³/h H3 GS dust-tested Chip container capacity 500l Electrics RL350 FU 11kW Extinguishing device powder extinguisher 12kg More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group

volume capacity: 60 l/mimengine output: 2 kWturning speeds: 2850 U/minfeed pressure: 9 barDimensions (LxWxH): 2400x1060x560 mmTotal Dimension: 2400x1250x1200 mmempty weight: 280 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Air consumption: 48 m³/hMotor output: 5,5 kWOverall size: 620 x 980 x 1480 mmReceiver: 215 LThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air consumption: 97,2 m³/hMotor output: 9 kWOverall size: 630 x 1220 x 1720 mmReceiver: 270 LThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaeser compressed air tank 3000 liters approx. 3 meters high

Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run

Direction of rotation - housing position LG 0 Operating temperature 20° C Density 1.2 kg/m³ Flow rate 3,600 m³/h Total pressure increase 3947 Pa Speed 2,950 min-1 max. operating temperature 40° C Motor rated power 7.5 kW Voltage 400 V Frequency 50 Hz Weight approx. 218 kg

HT 600 Lift table Load capacity 600kg Table height min. 400mm - max. 1010mm Dimensions LxWxH approx. 1900 x 740 x 400mm Platform L 1900 x W 740mm Roller diameter 125mm Weight approx. 190kg G&STÜ-6100600

Schuko extraction system Motor 7.5 KW Volume flow 7100 m3/h Bagging filter Return air / exhaust air duct

Spänex Aspirator with driving device D= 120mm and distributor G&-5134-M3OBQ

mobile, with lockable castors Table size 2000 x 1550 mm swivel horizontal-vertical Extension to height-adjustable possible on request

Fan - Pipe connection: D=600mm - Power consumption: 29.5 KW - Motor: 37 KW - Volume: 25,000 m3/h -Soundproofed

Weibert PHW 2508K Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 800 mm Stroke range 85-200 mm Steering angle 186° Turning radius 835 mm LxWxH 1200 x 540 x 1235 mm Weight 60 kg G&STÜ-6152513

table length: 1300 mmtable width: 800 mmstroke height: 1015 mmweight max. in kg: 3000 kg: 220 mmconnected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,3 x 0,8 x 0,23 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 650 Watttank capacity: 5,5 llength: 515 mmwidth: 430 mmheight: 825 mmweight of the machine ca.: 36 KgProfessional 650 watt construction dryerRecommended room size 40 - 50 m², height max. 2.6 mSound pressure level approx. 52dBDehumidification capacity 28 L/D - 51 L/DThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extraction system / briquetting press Extraction system 11 KW Briquetting press 7 KW

ASA 4303 Aspirator Nominal volume flow: 4300m³/h Filter area 2x 2.4 m² Chip collection volume 2x 215l Suction nozzle outlet: 2x 100mm, 2x 120mm Input power 3,8kW Motor 400V 50Hz LxWxH 1700 x 600 x 2400mm Weight 69kg G&STÜ-5128433