other wood working machines used for sale (1,314)

This Grecon Dimter FDL-F 205/600/500 was manufactured in 1997. It is designed for woodworking applications, offering robust performance and reliability. Ideal for handling a variety of wood processing tasks efficiently. Contact us for more information about this machine.

This RENNER RS132D was manufactured in 2018. It features a direct drive compressor, RENNERtronic control system, and an integrated parking heater. Key components include an oil-injected compressor stage, oil filter/thermostat unit, and fine oil separation with sight glasses. Ideal for efficient compressed air generation and management. Contact us for more information about this machine.

This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. Its equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine.

This BRANDT KDF 890 2CU edgebander was manufactured in 2011. It features a joint trimming unit, gluing unit, snipping unit, pre-milling unit, shaping trimming unit, profile scraper blades, surface scraper blades, buffing unit, and grooving unit. Consider the opportunity to buy this BRANDT KDF 890 2CU edgebander. Contact us for more information.

This Lange B 85 K edgebander was manufactured in 2013. It features an automatic edge feed, gluing unit, pre-cutting shears suitable for roll material up to 2 mm edge thickness, a pressure zone, cutting unit, and a combination milling station. A surface scraper is also included. Consider the opportunity to buy this Lange B 85 K edgebander. Contact us for more information.

This Hebrock TOP 2000 PLUS was manufactured in 2015. A used edge banding machine, it features a gluing unit, cutting unit, and combination milling unit. It handles edge material thickness from 0.5 to 3 mm and can manage workpieces from 10 mm to 45 mm in thickness. Ideal for precise edge finishing tasks. Contact us for more information about this machine.

This edgebander was manufactured in 2005. It is a single-sided combination machine ideal for formatting, edge gluing, and finishing panel-shaped workpieces made of wood or wood-based materials. Features include an automatic insertion table, NC insertion system, and a 12-compartment edge magazine for roll material up to 3 mm thick. It also boasts a variable feed speed of 5-25 m/min and a PC control ICOS open system. For more information about this edgebander, please reach out to us.

This HOMAG Brandt Profiline KDF - 780 was manufactured in 2006. It features a swiveling control panel, durable keypad, and a color graphic flat screen. The edgebander handles edge thickness from 0.4 to 12 mm and workpiece thickness up to 60 mm. Variable feed rate is 20 m/min. Overall length is 7360 mm. Contact us for more information about this machine.

This Barberan WM-33 was manufactured in 2025. A profile wrapping machine designed for versatility, it handles various materials including PVC and aluminum. It supports a wide range of foil types and utilizes PUR hot melt adhesives. Key features include a max mechanical speed of 60 m/min, profile dimensions up to 300 mm wide and 120 mm high, and a total machine length of 6000 mm. Contact us for more information about this machine.

This GANNOMAT Elite 25 was manufactured in 2009. Ideal for woodworking, this machine offers robust construction and reliable performance. Consider the opportunity to buy this GANNOMAT Elite 25 woodworking machine. Contact us for more information.

This Priess & Horstmann BMA-DLS-CNC was manufactured in 2000. Ideal for woodworking applications, it offers reliable performance for a variety of tasks. Consider the opportunity to buy this Priess & Horstmann BMA-DLS-CNC woodworking machine. Contact us for more information.

This Priess & Horstmann PBA-52M was manufactured in 2000. It is designed for woodworking applications, providing reliable performance for various wood processing tasks. If you are looking to get high quality woodworking capabilities consider the Priess & Horstmann PBA-52M machine we have for sale. Contact us for more information.

This IMA Novimat Systems I/R75/1000 edgebander was manufactured in 2005. It features a robust ICOS OPEN control system, a jointing milling unit with powerful motors, and a versatile multi-functional processing unit for detailed edge finishing. The machine includes a 32-position edge magazine and an advanced gluing unit with an automatic PU melting system. Consider the opportunity to buy this IMA Novimat Systems I/R75/1000 edgebander. Contact us for more information about this machine.

This BÜRKLE DAL 1 1300 was manufactured in 1990. Ideal for woodworking, it offers robust performance for various applications. Consider the opportunity to buy this BÜRKLE DAL 1 1300 woodworking machine. Contact us for more information.

This HYMMEN TLA was manufactured in 2002. It features a glue spreader with 4 rollers and a working width of 1400 mm. Consider the opportunity to buy this HYMMEN TLA glue spreader. Contact us for more information.

This IMA COMBIMA double-sided edge processing machine was manufactured in 2000. It is a double-sided edge processing unit ideal for industrial furniture production. Features include automatic complete processing of veneer/plastic strips as roll material from 0.4-3 mm and programmable feed speeds between 10 and 40 m/min. Equipped with a BECKHOFF control system and a modern industrial PC with a 21.5 monitor. For more information about this woodworking machine, please reach out to us.

This BRANDT Ambition 1660 FGC edgebander was manufactured in 2010. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this BRANDT Ambition 1660 FGC edgebander. Contact us for more information.

This HSM ABW-ROTA-2200 was manufactured in 2012. A used foil cutter featuring a cutting width of 2200 mm, it includes an IR preheating zone and a cooling unit. The semi-automatic roll change at the front and automatic stacking of sheets on pallets at the rear enhance its functionality. Consider the opportunity to buy this HSM ABW-ROTA-2200. Contact us for more information.

This IMA NOVIMAT I /G80/390/R3 edgebander was manufactured in 2013. It features dual 4.5 kW motors at 150 Hz, achieving speeds up to 9000 rpm. Capable of handling edge heights from 14 to 65 mm and roll diameters up to 850 mm, its ideal for precise edgebanding needs. Consider the opportunity to buy this IMA NOVIMAT I /G80/390/R3 edgebander. Contact us for more information about this machine.

This HOMAG KAL 330/9/A6/L edgebander was manufactured in 2011. It features a robust machine stand, electronic height adjustment, and a transport chain with a rubber pad. The machine includes a Quickmelt application unit with electronic temperature control and a pressure zone with pneumatic adjustment. Ideal for processing straight workpiece edges, it supports various edge materials. For more information about this edgebander, please reach out to us.

This 4-axis HOMAG PROFI KFL20/29/QA/25 was manufactured in 2003. Ideal for efficient edge banding, this double-sided edgebander represents a robust solution for woodworking needs. Consider the opportunity to buy this HOMAG PROFI KFL20/29/QA/25 double sided edgebander. Contact us for more information.

This HEBROCK AKV 3003 DK-F was manufactured in 2002. A robust edgebander with a total power of 10.5 kW, operating on 230/400 V and 50 Hz. Ideal for efficient edgebanding operations. Contact us for more information about this machine.

This WEBER LCE-2000-S-S1350 was manufactured in 2001. It features a wide-belt sanding machine with a working width of 1350 mm, a sanding unit plus a cleaning brush, and sanding shoes with pressure beam segment control. The cutting speed of the sanding belt is infinitely variable, and it has a 15 kW frequency-controlled drive. Maximum feed speed is 14 m/min. Contact us for more information about this machine.

This edge processing line was manufactured in 1996. It features a robust double-sided edge processing line, including a gluing unit with granulate pre-melter and a 6-position roll magazine for edging material. Equipped with both flush and fine milling capabilities, it also includes a profile scraper and a buffing unit. Ideal for longitudinal and transverse processing, the IMA COMBIMA offers comprehensive functionality for advanced woodworking tasks. For more information about this woodworking machine, please reach out to us.

This single sided edge banding machine was manufactured in 2000. It features a robust Beckhoff control system and operates with a mechanical gear motor for precise workpiece transport. The machine handles various edge materials, including veneer, PVC, and solid wood, with capabilities for both coil and strip ware. It supports a maximum edge height of 55 mm and a panel thickness up to 50 mm. Ideal for detailed woodworking tasks, the IMA COMPACT PC-6220 F machine we have for sale. Contact us for more information.

This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine.

This IMA Combima Systems/I/R75/1370 edgebander was manufactured in 2006. It handles workpieces ranging from 250 to 2800 mm in length and 115 to 1300 mm in width, with thicknesses up to 40 mm. Designed for materials like chipboard and MDF, it features a hot melt adhesive applicator and a servo edge feed system. Ideal for high-quality edge banding, consider the opportunity to buy this IMA Combima Systems/I/R75/1370 edgebander. Contact us for more information about this machine.

This HOMAG KAL 310/7/A3 was manufactured in 2010. A used single-sided edge banding machine featuring a 28-position ISAS edge magazine, PU gluing unit, and Boomerang return system. It includes a joint milling unit with two motors and a PU 34 gluing system with a capacity up to 6 kg/h. Ideal for precise edge banding applications. Contact us for more information about this machine.

This CASATI BIG 2600 was manufactured in 1995. It features a double-knife system with both upper and lower knives that trim veneer bundles from both sides simultaneously, ensuring precise cuts. The machine offers a substantial working width with a usable cutting length of 2600 mm, ideal for preparing veneers for furniture and doors. Consider the opportunity to buy this CASATI BIG 2600. Contact us for more information.

Combustion chamber output: 175 kW; Working power: 140 kW; Smoke flue diameter: 200 mm; Hot air delivery pipes: 1 x 500mm; Furnace length: 950 mm; Furnace width: 600 mm; Furnace height: 860 mm; Air flow rate: 8900 m³/h; Power consumption: 3500 W; designed for room volume: 3000 m³; Area to be heated: 500/600 m²; Furnace height without hot air delivery pipes: 2200 mm; Furnace width: 930 mm; Furnace length without flue gas fan: 1700 mm; Weight: 615 kg; Hot air furnace with a combustion chamber made of stainless chrome thermal steel, with reinforcing fins and flue exchanger. On