other wood working machines used for sale (1,314)

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Hydraulic wood splitter, functional Details on request

Remote-controlled gate loading system H38 For the block-initiating gate incision at high feeds. The gate guide sits in a stationary operating stand with a good overview of the entire cutting system. The machine is in very good condition and can be delivered with new control on request!

Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc...

Roundwood feeder with separation 4-strand

Full gate Esterer SS45 was generalueberholt Pass 450 mm 340 upm 500 Hub with complete hanging, saegen blaetters and Templates with hydraulic roller lifting with wedge wedge with drive power 30 kW with hydraulic unit with complete control cabinet

Roundwood feeder 4-stranded with depositor Möhringer Dimensions: Round wood cover 6.00 meters long, 6.00 meters wide Insert 6.00 meters long, 1.50 meters wide the system is 4-strand edter with electric motors and hydraulic unit

Rind mill

R&E Conveyor No 2618 Y.O.M. 1998 Width 2x 650 Length 16 m Curved, head approx. 6 m Good condition!

Technical data Ruwac WS 2220 m Suction: 2,400 Watts Air capacity: 290 m3/h Voltage: 230 Volt Vacuum: 210 mbar Filter surface bag filter: 1.2 or 2.6 m2 Tank capacity: 35 litres Residual dust filters: 3.2 m2 Sound pressure level: 67 dB(A) Inlet: 50 mm

Conveyor for peace\'s length 6 m+ 3 m high

COMPLETE HIGHSPEED SAWMILL LINE (capacity 80 000 fm): HIGH PERFORMANCE SASH GANG SAW ESTERER EWD HDN 600 WITH BV..

Komplette Hackanlage LINDNER 150/400 37kW mit Vibrorinne ca. 17 m, Siebzone ca. 5m, Bogenfoerderer ca. 6 m Hoehe, Laengskratzer in 3 Bunker ca.12m, Trommelsieb; ready for work

For sale rotary dryer made from Bison, output 5 t/h, with heating stove 6mW with self feed and self cleaning moving fllor. With all need equipment, cyclon, chimney, and fans. Price 110.000,00 EUR EXW. +38765812388 Neven

For sale renewd shredder made by HOMBACK with 250kw. Used for shredding wood in long till chipwood.

Fixed side at the leftPanel thickness min/max: 16/45 mmMin. panel width: 150 mmLateral panel support for panel width up to 900 mmMin/max. panel length: 700 / 3100 mmMax. laminate overhang: 110 mmMax. laminate thickness: 0,8 mmRadius min/max: 6 / 22 mm (depends the laminate)Feedspeed max. 18 m/minTop pressure by beltEquipment:Infeed fence, adjustable, defines the panel overhang2 x trimming unit 0,4 kW, HSK 25 toolholder1 x PVAc glue application5 x glue nozzle, adjustable1 x hot air blower3 x IR heating on top (55 cm length), 3 x bottom (90 cm length)Postforming zone 1,8 m. lengthVarious pre-installed profiling sets 1 x top trimmer 0,4 kW

Fixed side at the leftFeedspeed 18 - 25 m/minWorking width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mmPanel overhang 30mmPanel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations)Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mmCoil diameter 830 mmEquipment:Sprayers release agentSquaring device with 2 motors each 3 kWEdge heatingEdge magazine for 2 coils, guillotine for edges up to 3 mmGlueing part A20 with quickmelt applicationLateral pressure zone K, 1 driven and 6 after pressing rollersEnd trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kWContour trimming, 2 exchange unitsProfile scraping PN10Flat scrapers FA11Sprayers cleaning agentBuffingAutomation package straight/chamfer:-Automatic adjustment infeed fence-Automatic setting of pressure rollers-Pneumatic setting of end trims-Pneumatic setting of rough trims-Automatic setting of chamfer/ra ...

Single sided edge bander with hot melt, fixed side at the right, pre-milling unitEdge thickness: 0,4 to 12 mmWorkpiece thickness: 8 - 60 mmFeedspeed 8-20 m/min (limited to 10 m/min using the contour trimming)Workpiece transport by chain, top pressures with rubber rollersSound enclosure over all trimming motorsEquipment:Adjustable fencePre-milling with 2 shapers, each 2,2 kWCoil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollersEnd trims, 2 x 0,35 kW motors, straight and chamfer 15?Top/bottom trimming, motors 2 x 0,35 kWRadius trimmmingContour trimming unit, leading and following edge, 2 x 0,35 kWRadius scraping unitGlue scrapersBuffing unitControlls PC 20+

Motorised height-adjustmentSound enclosure over all trimming motorsEquipment:Coil and strip magazineHot melt unit Pressure zone End trims, chamfer and straight, automatic adjustmentTop/bottom rough trimmingTop/bottom fine trimming, tilting, Contour trimming unitScraping unitBuffing unitreturn conveyor Ligmatech ZHR 05

Drum crusher with hydraulic pusherKnife drum width: 800 mmMouth 800 x 1200 mmMotor: 18,5 kWextraction connection diameter 200 mm

machine 1:Fixed side at the left, working width 220 mm to 2500 mmWorkpiece overhang max. 110 mmElectronic width adjustmentPanel thickness 8 - 90 mmTop pressure by beltsRolling chain with automatic lubrication, automatic pop-up dogs every 1000 mmFeed speed 10 - 40 m/minChain infeed taking 1,62 m. panels in front of the dogsPanel alignment at the infeedMiddle supportNC 30 controllsEquipment left and right:1+1 Jump universal shaper 6 kW1+1 Twin hogging unit, motors 6,6 kW (2 motors)1+1 Universal shaper 6 kW1+1 Jump universal shaper 6 kWpanel turning device HOMAG TD 31/30/13Year 1989machine 2:Fixed side at the left, working width 220 mm to 3000 mmWorkpiece overhang max. 110 mmElectronic width adjustmentPanel thickness 8 - 90 mmTop pressure by beltsRolling chain with automatic lubrication, automatic pop-up dogs every 1000 mmFeed speed 8 - 40 m/minChain infeed taking 1,62 m. panels in front of ...

Single sided postforming line, capable of doing L - and U profiles, with or without insert.Workpiece thickness: 16 to 60 mm.Min. workpiece width: 150 mm.Workpiece overhang: 70 mm.Max. laminate overhang: 105 mm.Feed speed 3 - 18 m/min.Fence side at the leftEquipment:Squaring and shaping part:1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate1 x scoring, motor 1 kW, top position1 x milling unit for the laminate when doing U profiles 1 x laminate support Postforming part1 x blow cleaning nozzle 6 x glue nozzle for the glue application 2 x glue roller9 x IR heating, each 2,2 kW2 x Hot air blower, each 10 kW1 x Basic postforming pressure zone for L-profiles, using rollers1 x Basic postforming pressure zone for U-profiles, using rollers1 x VF postforming pressure zone for special profiles, using pressure pathsFinishing  ...

Semi-automatic

Max working width: 1300mmMax working thickness: 140mmMax. machining width: 1300mmMotorized feed rollers2 brushing units

4-side squaring and edge banding lineMachine 1:Fixed side right, moving side leftRolling chain, feed 10 - 40 m/minControlls NC 21Panel thickness 8 - 60 mmMax. panel width 1500 mmEdges: coil 0,3 - 3 mm, strips 0,4 - 20 mmEntry fence for veneered panelsEquipment:1+1 Compact-twin hogger, 2 motors 6,6 kW1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application1+1 Free space for solid wood edges up to 2,54 m length1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm)1+1 Universal shaper 8,1 kW1+1 Universal shaper 8,1 kW1+1 Edge sander KS 101+1 Disc sander DS 401+1 Disc sander DS 40Angular transfer to the right, TWR 24/30/12/SPanel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mmMachine 2Machine II + infeed magazine TW 24Fixed side right, m ...

Workpiece thickness: 8 - 50 mmEdge thickness: Coil edges 0.4 - 3 mmFeed speed 10 m/minEquipment:manual height adjustment.Joint milling unit, 2 motors Panel edge heatingGluing area Pressure zone 1 driven and 2 non-driven rollersEnd trims, 2 x 0,8 kW motors, straight and chamfer 15?Top and bottom trimmingProfile scraping unit for PVC edgingGlue scrapers

Min./max. thickness edge banding on roll: 0,4 - 3mmMin./max. thickness edge banding in strips: 5 mmMin./max. panel thickness: 8 - 50mmMin. panel length/width: 190/110mmThroughput speed: 9m/minPre-milling unit: 2,2kW 7200 rpmSprayers release agentPanel heating device Automatic laoding for edgesGluing unit: 0,18kWEnd-cutting unit with radius: 0,19kWTrimming unit: 2x 0,35kW, 12000rpmRounding unit up to 3mm: 0,35kWEdge scraping unitSprayers cleaning agentGlue scraping unitBrushing unit

Workpiece thickness: 8 - 90 mm, electronically adjustableFeed rate: 18-32 m/min frequency controlledEdge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mmEquipment:Inlet guide automatically adjustable via the control, extension 500 mmJoint milling unit: 2 x 3.0 KWworkpiece preheatingGluing unit A34edging magazine for rollPressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the controlCutting unit WK14, straight, 2 motors 0.8 kWPre-milling unit: 2 x 1.5 KW, pneumatic adjustmentForm milling unit FF 12 automatic, 2 motors 0.4 kWradius/phase milling unit FF12 automatic 4 motors 0.4 KWuniversal milling aggregate controlled UF11, 4 kWProfile scrapers PN20Glue scrapersNozzles for detergent and anti-stickPolishing unitControl: Power Control PC22

Working field: axis x: 2310 mm, axis y: 628 mm, axis z: 90mmMax programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/minDrill chuck: diameter 10 mmSpindle speeds: 4000 rpmGrooving saw: diameter 120 mmDrill spindles: 4 horizontal spindles in X,12vertical spindles in X lineWorking air pressure: 6 barMax consumption of compressed air: 0,75 NL/cycleInstalled power: max 7.5 kWCapacity of vacuum tools: 40 m?/hCNC:screen: monochromatic 9?Floppy disk unitPLC for control of the machine cycle