other wood working machines used for sale (1,314)

roofing felt nailsPASLODE3.1 x 25 mm (3.0 x 25 mm)no. 00X701718,000 pcs (2 boxes)wire magazineNew !Dimensions: 460 x 500 x 300 mm

Nail Strips, Strip NailsPASLODE3.8 x 1210113121approx. 2800 pcs. (2 boxes)New !matching nailer W117 !Dimensions: 290 x 250 x 270 mm

HOLZKRAFT FBS-740-2 F32 Bandsaw Voltage: 400 V / 50 Hz Motor Power: 5.5 kW Max Cutting Width: 710 mm Max Cutting Height: 500 mm Max Cutting Speed: 1000 m/min Weight: 880 kg Find more here - / Contact us at -

Pallet Production Line / SAS bracket line Three people are needed to operate the line and two people to operate the saws for cutting the supports Saw cutting can be further automated. Find more here - / Contact us at -

2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - / Contact us at -

Complete Lacquering line - Feeding - Primer application unit - Dryer - UV plant - UV dryer - Stacking System components are all from Bürkler and Kontra Formats: 1860, 2800, 5600x2070mm Number of application units: 10 units, 3 of which are UV UV dryer: 1x 4 UV-tubes, 1x 5 UV-tubes: 1x 6 UV-tubes Output: approx. 3300m²/h Find more here - / Contact us at -

Details: - Manufacturer : BALJER / Zembrod - Type: AS/28H-R.D - Year of Manufacture: 1994 - Condition : used Find more here - / Contact us at -

Höfer Press for sale. Model: HKP 260 + HKP 40 Year: 2005 Dimensions: Dimensions of the HKP260 (for transport): L x W x H 5100 x 2300 x 3000 mm Dimensions of the HKP40 (for transport): L x W x H 3900 x 2300 x 2400 mm Dimensions of each hydraulic unit: L x W x H 1400 x 1400 x 600 mm Loading table dimensions: L x W x H 4900 x 2100 x 1100 mm Outfeed table dimensions: L x W x H 2900 x 2100 x 1100 mm Heating unit dimensions: L x W x H 1400 x 500 x 1300 mm (2x) Main control cabinet dimensions: L x W x H 2000 x 1000 x 400 mm Dimensions of entire system ready for operation: L x W x H 14600 x 2600 x 3000 mm Weight of the HKP260 press (for transport): approx. 13000 kg, all attachments removed Weight of the HKP40 baler (for transport): approx. 6300 kg, all attachments removed Weight of the hydraulics: approx. 350 kg Weight of the switch cabinet: approx. 400 kg Weight of the heaters: ...

SCM Pratix-S 12 B CNC Machine Centres With Flat Table Find more here - / Contact us at -

1992 Masterwood MW21.31KS CNC drilling-milling machine Electric throttle (throttle n° ) Electric throttle - 11 fuggoleges + 6 horizontal - 11 ftie:e:oleges + 6 horizontal + furrow - 24.000 rpm 2.04. Noise level The noise level of the cheetah: MW 12.25 KS/ MW 15.38 KS/ MW 18.38 KS/ MW 21.31 KS/ MW 21.42 KS In accordance with 1SO7690 - EN848.3 Furas: - level of acoustic noise Leą at the operator´s load - the maximum power of the instantaneous acoustic footprint is less than - the acoustic difference under the LWA load is below Ćitvalastas: 19,5 dB (A) 130 dB (C) 99,2 dB (A) - level of acoustic noise Leą at the operator´s load: 82,5 dB (A) - the maximum power of the instantaneous acoustical noise is less than 130 dB (C) - the acoustic difference under LWA load is less than 103,4 dB (A) The tests were carried out with a Bruel & Kjaer 223 I precision integral sound  ...

Technical Description - Model: MARK/C 20-32.5 - Manufacturer: ITALPRESSE - Year of Manufacture: 2003 - Line Function: Designed for laminating veneer on chipboard, MDF, and plywood panels. --------------------------------------------------------------- Components of the Line Vacuum Loading Unit: - For loading thin panels from the scissor lift into the brushing machine. - Passage Width: 2000 mm. - Translation Speed: Adjustable 7–35 m/min. - Cycle per Minute: 3–5 (depending on panel size). - Suction Cups: 6. Brushing Machine: - Working Width: 2000 mm. - Max Opening Height: 100 mm. - Rollers: 2 motorized brushing rollers (180 mm diameter), 2 forwarding rollers (125 mm diameter). Glue Spreader (Brand: Osama): - 2 spreading rollers, 2 dosing rollers. - 4 motors. Index Table for Automatic Composition: - Belt dimensions: 2000 × 4000 mm. - Features photocells and a stop bar for pr ...

2020 Giardiana DUAL TECH 420 SBC DRY Find more here - / Contact us at -

2009 Elumatec SLK 118 A template-free copy milling machine type SLK 118 from elumatec from 2009, Find more here - / Contact us at -

Finger jointing line The plant is from 2011 and the machines have been delivered NEW by HOWIAL. The Cook Bolinder is a used, old but very robust machine. Some electrical devices have been replaced. Item Description 01 HOWIAL - Dump unstacking SH/4t for lifting the raw wood pile to the required working height working height and semiautomatic separation of the wood of the wood stack. Both battened and unbattened stacks can be separated. can be separated. With inclination possibility for tilting the stack of wood up to 45°. Tilting and lifting of the stack by electric motor drive. drive. stack dimensions max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest lumber length 2,5 m 02 HOWIAL - lamella separation VE 1 for layer separation between tilt destacking and and roller conveyor to the crosscut saw. With pneumatically controlled tongues, on which the material is ma ...

Encolleuse Bürkle RCG 700 Bürkle RCG 700 2017 Find more here - /

was used for Plastic products Nerling systemraeume - manufacture Find more here - /

Year of Manufacture : 2021 Model : TEMPORA 45.03L Type of machine : Edge banding machine Manufacturer: Format-4 Voltage: 400 V Phase: 3 PH Frequency: 50 Hz Current: 22.8 A Power: 14.5 kW Minimum Air Pressure: 7 bar Find more here - / Contact us at -

1999 WEBER LC 2000 DDP-600 Working width max. 600 mm Workpiece thickness max. 150 mm automatic measurement of the workpiece thickness Feed continuously adjustable 2 - 12 m/min. Aggregate equipment: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole-changing for 2 grinding speeds 2) Rubber contact roller assembly with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole-changing, this one The motor also drives the subsequent sanding shoe unit 3) Sanding shoe unit pneumatically controlled Machine complete with small parts return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Connection values: 400 V, 50 Hz, 3 Ph. Find more here - / Contact us at -

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - / Contact us at -

Peddinghaus 960 cold saw and Peddinghaus TDK 1000/3 spindle beam drilling line 18M infeed and outfeed, 5M drag system infeed and outfeed, Hard stamper system, Fagor software operator system 1 Saw and drill and measuring system, nobody would buy these unless sold as one unit 2 Feed and transfer system 3 Hard stamper Find more here - / Contact us at -

Langzauner LZT veneer press in very good condition for sale. Heating plates (anodised) have only been replaced and are in great condition. Comes with an automatic opening and safety device. Self collection. Forklift available for loading. Find more here - / Contact us at -

HolzHer Cut 110 for sale. the complete computer has been exchanged and the software has been updated (2022) the guides of the material pusher and saw carriage have been exchanged (2023) A second blower for the air tables has been installed and an additional table has been added. mint condition dismantling is buyer 1 shift operation run and not really loaded. The machine is "freshly" made. Gear stems from the slider + guides have recently been replaced. Bearings and guides are new and computer is new. the whole rebuild cost 40k to 50k Technical data and description: Basic machine pressure beam saw Design: fence right Sawing cycle: away from fence Cutting length: 5850 mm Cutting width: 5850 mm Saw blades Main saw blade Ø 400 X 4,4 X 30 mm, Z72, FZ/TZ (not included!) TCT scoring saw blade Ø 180 x 4.4/5.4 x 30 mm conical (not included!) Cutting height Cutting height: 110 ...

Fubo 2” flooring line Plant is ready for production Key data: Attachment Fubo 2 Construction year 1999 Format finished product 193mm x 1380mm Maximum speed 6-8mm 80 parts per minute / 10/12mm 60 parts per minute Feed longitudinal machine 130m/min Feed cross machine 30 m/min Stacking areas for semi-finished products 2 Buffer spaces for semi-finished products 2 Spare plate space 1 Longitudinal saw (dividing saw) 11 motors with gearbox (2 hoggers, 9 saw blades) Longitudinal machining (Homag) 10 Motors 6-8KW Cross processing (Homag) 12 Motors 5-8KW Baumer control system (service discontinued) 2014 S/N:35983 Cardboard packaging (folding boxes only) Buffer spaces for finished pallets 6 places + 1 on VW + 1 stacking place Find more here - / Contact us at -

Depaneling machines manufactured by Holzer GMBH for sale. Model Low 4233 D XXL Year 2015 - Large work surface: 700 x 400 mm - Rigid welded steel frame - Highly dynamic linear motor axis - Quick product change possible - Flexible PCB mounting systems - Cutting process with discs and / or shank tools - Separates any PCB material - Laser axis measurement - Individual special sizes possible The highly dynamic depaneling machine LOW 4233 XXL is especially suitable for medium to high product volumes and meets growing requirements in the production process. Printed circuit board benefits from a wide variety of materials which are made using low-dust and low-stress sawing and milling techniques with the highest product flexibility, precision and throughput separation. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine ...

Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details.

Dust extraction system manufactured in 2002. This LBH Suction system features a robust radial fan with a motor power of 22 kW and an impressive air flow rate of 13,750 m³/h. The filter area is 155 m², ensuring efficient dust removal with a residual dust content of less than 0.2 mg/m³. If you are looking to get high-quality dust extraction capabilities, consider the LBH Suction system we have for sale. Contact us for further details.

This ERREGI 300 LP was manufactured in 2018. It is a shrink foil packaging line designed for automated packaging with precise temperature control and efficient air circulation for uniform shrinkage. Features include a 400 V, 50 Hz voltage, 15 m/min feed rate, and dimensions of 12m x 4m x 2.5m. Consider the opportunity to buy this ERREGI 300 LP. Contact us for more information.

Springer Destacking and Packing System Complete with electrical control cabinet and control panels

4-fold combi hammer C3-31, standard equipment, 2000 mm table length, 3 knives, approx. 450 kgPrices subject to change, errors, printing and typesetting errors excepted

Hardened precision steel bar guided sliding aluminium table.Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree rasterMitre fence 1400 mm with 2 end stops, integral fence 500 mmCircular saw:max sawblade diameter 315 mmspindle diameter 30 mmmax. cutting width at parallelfence 850 mmmax. cutting height, 90°/45° 103 mm/72 mmengine power 3,8 kW S6 (3 Kw S1)dust collector inlet 120 mmlength of sliding table 2000 mmSpindle moulder:spindle diameter 30 mmspindle travel 160 mmspindle speeds 8000/6000/3500/1500engine power 3,8 kW S6 (3 Kw S1)weight 520 kg