other machines and plants used for sale (20,329)

Little Run Leybold Scrollvac SC60D Scroll Pump. Immediately available. 3 months warranty.

overhauled Leybold DK200 gate valve pump. Immediately available. 6 months warranty.

Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV  ...

More information will follow.

unused, new Kleenoil filter system for workshop use Type S6-103 Year of construction 2023 Execution: Mobile oil filter system Steel construction, powder-coated 6 ultra-fine filter units SDU-H8 incl. 6 filter elements SDFC with the option of use 1 x 6 or 2 x 3 Filtration capacity (average) 500 l/h (40 cSt) For oil quantities up to 10,000 l Self-priming gear pump Pre-filter unit with washable filter cartridge Automatic low-pressure shutdown Pressure gauge display Component protection IP55 Transfer function - oil pumping without filtration 6 m suction and return hose with quick couplings Starting viscosity: max. 1,000 cSt. Filtration viscosity: < 200 cSt.

Qty. 1 Second-hand vertical profile painting cabine The equipment is designed for automatic electrostatic spraying of powder paints and varnishes onto long metal products and must be built into a production line equipped with an overhead single-rail closed ring conveyor. Mfc.: TRASMETAL Built: Main technical characteristics Maximum profile size: Width: 120 mm Height: 8,000 mm Length (axial along the conveyor): 350 mm Equipment exhaust ventilation: 24,000 m3/hour Compressed, dried and purified air (water - maximum 1 g / m3, oil - maximum 0.01 ppm / m3) Total flow: 530 m3/hour Pressure: 7 bar Electricity: 380 V, 50 Hz, 3 ph. Power: 235 kW

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

Paint dosing system from Fluid Solution incl. software

Bous Waschfix T6/70 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix T6 / 70 WSA Usable space: 700 mm Filling quantity: 280l / 280l Temperature +70 / +70 °C Heating: 18 / 12 kW Extraction: 0.56 kW Drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 84 A 400 V Year of construction: 2014 Extras: Ultra-fine filters Draining pump More items - new and used - can be found in our shop! International shipping costs on request!

Bous Waschfix 70/T3 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix 70/T3 WSA Extras: Ultra-fine filters Draining pump Filter monitoring More items - new and used - can be found in our shop! International shipping costs on request!

Bous Waschfix WSA 70 T3 Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix WSA 70 T3 Usable space: 700 mm Filling quantity: 180l / 180l Temperature +70 / +70 °C Heating: 12 / 6 kW Extraction: 0.25 kW Drying: 5 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 54 A 400 V Year of construction: 2009 Extras: Ultra-fine filters Draining pump Filter monitoring More items - new and used - can be found in our shop! International shipping costs on request!

1.Length measuring device with a measuring range of up to 12 meters 2.High Accuracy Linear Guide 3.PC data connection for a documented measurement

Weiss WK-1000/70 Climatic test chamber -70 to +180 °C White WK-1000/70 Climatic test chamber 990 litres Climatic chamber -70 to +180 °C with humidity 10 to 98 % Test chamber dimensions: Height 950 mm Width 1100 mm Depth 950 mm More items - new and used - can be found in our shop! International shipping costs on request!

Vötsch VT 7012 S2 Simcon-Net Farbtouch Schocktestkammer Vötsch VT 7012 S2 Simcon-Net color touch Shock test chamber Shock test test chamber More items - new and used - can be found in our shop! International shipping costs on request!

Heraeus Vötsch VT 7100 Temperature test chamber -70°C to +180°C Heraeus Vötsch Temperature test chamber VT 7100 -70°C to +180°C 1035 Litre(s) More items - new and used - can be found in our shop! International shipping costs on request!

Siemens Micromaster 440 frequency converter 132/160 kW The Micromaster 440 inverter is suitable for a wide range of variable-speed drive applications. Its flexibility allows for a wide range of applications. It also includes cranes and hoists, high-bay warehouses, food, beverage, and tobacco production machinery, packaging machinery, etc.; In other words, applications that require higher functionality and dynamics of the frequency converter than usual. The inverter is particularly characterized by its customer-oriented performance and user-friendliness. Its wide mains voltage range allows it to be used worldwide. - Simple, guided commissioning - Modular design allows maximum configuration flexibility - Low-noise motor operation due to high pulse rates, adjustable (note derating if necessary) - Protection for motor and inverter - EMC filter, class A/B option - Latest IGBT t ...

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts hea ...

Engine – TBG 616 V 8 K - Approx. 72,500 operating hours - Landfill gas - Engine number 2205942 - Built in 2005 Generator – Marelli M8 B400S4B20 More pictures, information and offers on request. Viewing is possible at any time by appointment. Location: 49811 Lingen / Ems Subject to prior sale

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

Qty. 1 Second-hand aluminium strip caster – dismantled and in storage Mfc.: Tianzhong, China Built: 2005 Stopped: 2008 Dismantled: 2022, currently in storage Strip width: 1400 mm Thickness: 5 – 10 mm (AL S1000) 5 – 8 mm (AL S3003) Consisting of: Caster roller: 2 x dia. 750 mm x length 1600 mm caster work roll containing support roll chocks Caster shell: 2 x new dia. 820/700 mm x length 1600 mm Shell Alloy: ZTGT-2100 (Upgraded from 32Cr3Mo1V) Surface Hardness: 400-430 HB (43-46 HRC)

Hydraulic power unit with control With oil cooling Ideal for building log splitters or hydraulic presses

Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1060 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

Offer up to 2 plasma power supplies here. Technical data, as shown in the picture. The devices are 9.5" wide. In some pictures, both are depicted.

Cutting machine HSM type ABW-ROTA-2200 Specifications: • for foils, cork, veneer, etc. • Rotational cross-section • Cutting width max. (mm): 2100 • Heating: included • Cooling: included

Vehicle data: Make: Linde, Type: Door LIN3944379144, Year of manufacture: 0, Internal number: DIV1344, Mast data: Dimensions: Battery & charger: Description & special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description:

Paint booth: Make : SAIMA Year of manufacture : 2018 Dimensions: 3.95 m x 7.21 m x 3.25 m (approx. WxLxH) Supply air blanket : Filter blanket Lamps : 23 pcs. LED downlights Entrance side : 4-leaf folding gate 3.8 m x 3.1 m (approx. WxH) Escape door : lateral, 0.9 x 2.1 m (approx. WxH) Rusting : none, due to sidewall extraction on both sides Heating unit : approx. 255 kW, gas surface burner Drying temperature : 80 degrees C Supply unit : 33,000 m3/h; 11 kW Exhaust unit: 33,000 m3/h; 11 kW Pipelines : supply and exhaust air pipelines, deflector hood, etc. Electrics : Electrical cabinet Location : Münche area Selling price : € 16.990,- net ex site without dismantling

A centrifugal pump with 10 stages with 160KW electric motor and adjustable base frame is offered. Data of the pump: 128m³/h at head 310m Speed 1430 /rpm P 139KW Year: 05/2006 Electric motor: 160KW 1000V 118A 1,485 rpm

Hardness tester Wolpert Testor HT 2001 Year of manufacture 1979 Hardness testing Rockwell Brinell Vickers Weight 185 kg Data Adjustment tool Unchecked!

Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Total depth: 1,000 mm (support rod direction) Total width: 1,230 mm (crossbar direction) Support rod dimensions: 45/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 45 mm Mesh size: 60 x 40 mm Weight: approx. 18.11 kg | Pcs. Internal designation: S Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Transformes Spare Parts