other machines and plants used for sale (20,329)

to move the heaviest loads Total thrust 400 to - 4 x 100 to Cylinder stroke approx. 1,000 mm Double-acting hollow piston cylinders Tie rods 9 x 6,000 mm, 1 x 5,000 mm Operating pressure up to 400 bar Tank capacity approx. 500 litres Operation via wired remote control Electrical values 400 V / 2 x 30 KW

Digital Screw Gauge from Mitutoyo 400-425 mm Overgrip new in the original wooden box with test certificate

3 Pieces Mitutoyo Micrometers with Digital Display Mechanical as good as new unused / measuring surfaces are still sealed from old stock without transport box very good condition

Mitutoyo U-Clamp Gauge as good as new unused Mod. 105-408 Gauge 1000-1100 mm in the original List price 3450 €

I offer here 2 pieces of fine indicator throat gauges from Mahr so-called Marameter F 1 x 25-60 mm 1 x 50 - 100 mm in very good condition immediately ready for use and tested for function the two devices are delivered as shown in the pictures

The ICP-725-OES of the Agilent 700 series from Agilent Technologies delivers reliable and timely analysis results. Emission spectroscopy with inductively coupled plasma enables the simultaneous determination of major, minor and trace elements. The plasma viewed radially is vertically oriented, which makes it tolerant of complex matrices. In this way, it ensures reliable and reproducible results. A fast warm-up phase increases sample throughput and productivity. Due to its robustness, the ICP725 is ideal for applications in mining, chemical industry, salt production, wear metal analysis, petrochemical production and precious metal refining. The ICP is sold with the following accessories: • Autosampler: SPS3 (S/N: AY1103M057) with associated housing • Refrigerated mobile Minore II VS – R101-19 (S/N: SZ 1337 11) • PC and ICP-Expert II software • 2 x SPS3 probe 1.0 mm id i ...

Siemens Sinumerik 840D control, incl.: grinding tool preparation, hydraulic unit, and portal loading system for loading and unloading the machine, Technical specifications:, Tip distance: 600mm, tip height: 180mm, maximum grinding diameter: 355mm, maximum workpiece weight: 150kg, maximum Z-axis speed: 11 m/min, minimum Z-axis speed: 0.01 m/min, maximum X-axis speed: 7.5 m/min, minimum X-axis speed: 0.01 m/min, External/internal grinding spindle:, Grinding wheel standard (Øa x b x Øi): 600 x 80 x 304.8 mm, Grinding wheel circumferential speed: 5 - 50 m/s, Power consumption of grinding spindle motor: 11 kW, Workpiece spindle:, Taper bore workpiece headstock: MK 5, Power consumption: 2.7 kW, Tailstock:, Taper hole center point: MK 4, Coolant reservoir: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters, Operating voltage: 400 volts, 3 phases, Mains frequency: 50 Hz, Total w ...

for sale is an extraction / filter system from Aerotecnica, System is still under construction., Subject to prior sale, changes and errors!

Belt washing system Rösler C20.30/0.6/B/SOP/P/SOP,, Year of manufacture: 2016, Serial No.: 72441,, Stainless steel, for container dimensions 400 x 600 mm, consists of the following work zones:, washing 1, blow off 1, washing 2, blow-off 2, Cooling with ambient air, The workpieces pass through the washing zones of the system continuously on a chain conveyor system., The drive is via a gear motor with speed control., The surface of the workpieces is first sprayed and cleaned on all sides using nozzles., The workpiece carriers then pass through the blow-off zone, where the workpieces are blown off with filtered ambient air via special nozzles., Analogously, the workpieces pass through another washing and blow-off zone (washing 2 + blow-off 2), To ensure the cleanliness of the workpieces and the washing liquid, each washing zone is equipped with a filter system., To improve washing and dryi ...

Sell: Ventilation module GR35C-ZID.DG.CR Item number: 7515724 / 188446/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR35C-ZID.DG.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Sell: Ventilation module GR35C-ZID.DC.CR Item number: 7515723 / 188443/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR35C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Sell: Ventilation module GR31C-ZID.DC.CR Item number: 7515722 / 188445/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR31C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Sell: Ventilation module GR31C-ZID.DC.CR Item number: 7515721 / 186781/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR31C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Variable displacement pump, axial piston helical axis design, for hydrostatic drives in open circuit. Mannesmann Rexroth Replica, New Part The flow rate is proportional to the drive speed and the delivery volume and is infinitely variable at constant drive speed. Manufacturer: Zhen Yuan Model No.: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size 0-355 cm³ Actuator: Pressure regulator Flow volume 355 cm³ Max. speed 1320

For sale is a used low-pressure cleaner, from the manufacturer System Cleaners. The LEDA 5 comes from a prototype plant and is only 50 operating hours. Year of Make: 2011 Type: LEDA 5 FF Max. temperature: 70°C l/min. max.: 120 Voltage: 3 x 400 V Frequency: 50 Hz Dimensions (L x W x H): 1700 x 800 x 540 mm Weight: 150kg Grundfos Vertical Pump: CRNE5-14 J-CA-GI-E-HQQE incl. installation and maintenance instructions Price excludes VAT, freely loaded from the Hesse-Germany location. Shipping to Arrangement and assumption of costs as well as delivery possible throughout Germany. Changes / errors in the technical data as well as prior sale reserved.

For sale is a used high-temperature analyzer, from the manufacturer Elementar Analysensysteme GmbH. The liquiTOC trace is functional and ready for use. Year of Make: 2007 Mains voltage: 120-230 V AC +-10%, 50/60 Hz Connected load: approx. 1.9 kVA Operating Modes: TC, TIC, TOC, NPOC, POC Calibration: linear Sample volume: 0.05-4ml, depending on the concentration range Analysis duration: 6-22 min, depending on operating mode Sample storage type: PS 61E Weight: approx. 50kg The instruction manual is provided. Price excludes VAT, freely loaded from the Hesse-Germany location. Shipping to Arrangement and assumption of costs as well as delivery possible throughout Germany. Changes / errors in the technical data as well as prior sale reserved.

Incineration plant for solvents from exhaust air This equipment is connected to a flexographic printing machine and meets the EU standards. Number of reactors = 3 Exhaust air volume maximum 7500 m3/h Exhaust air volume minimum 1750 m3/h The plant's burner was renewed in 2023

GRUNDFOS PUMPS TYPE CR32-2-2 A-F-A-E-HQQE 3 KW; Q 30M/H TYPE CR32-2-A-F-A-E-HQQE 4KW; Q 30M/H

D8946006S/12 Power supply 20 kV Dimensions: L: 73 cm W: 39.5 cm H: 41 cm Weight 119 kg

Miele G 7893 Professional Laboratory Dishwasher Washer & Disinfector with Hot Air Instruction manual available Water connection 1x cold water (KW) 1x hot water (AW) 1x AD Water (OD) Water drainage 1 drain hose Power supply: 3N AC 400V 50Hz Power consumption [kW]: 9.7 External dimensions H/W/D [mm]: 850 (820)/600/600 Net weight [kg]: 72

Nema Corrosion Test Chamber for Salt Spray Tests Manufacturer: Nema Type: NSN 300 Nominal voltage: 400 V Rated current: 11 A Compressed air: 8-10 bar Air consumption: 6 Nm³/h Humidifier: 0.5 l/h Water pressure: 2-8 bar Power consumption: 5.6 kW Brine: NaCl: 50 +- 5.6 kW External dimensions (WxDxH) 3200 x 1200 x 1900 mm Internal dimensions of the test chamber (WxDxH) 3100 x 1000 x 880 mm Weight: 390 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Qty. 1 Second-hand shot blasting chamber unit Mfc.: Getrasur Blasteco Type: BLASTECO PC-BE 2466 Built: 2007 Stopped: 2022 with complete handling equipment Dimensions: 24.0 x 5.85 x 5.95 m – L x W x H Construction: Modular bolted – steel sheet elements. The frame structure consists of 7 internal frames and 2 edge frames. The edge frames form the gate porticos. Access: Main roller shutter gate (2 pcs.), motorized - electrically driven Gate clearance: 5.0 m x 5.01 m (width x height) Consist of: Control cabinet GETRAFLEX abrasive recovery floor Recirculation machinery Recovery and separation system Lighting (top, side) Automatic gate (x2) Service doors (x2) Cleaner (x2) Dust extraction ventilation

Qty. 1 Second-hand plate storage system Mfc.: Kasto Maschinenbau GmbH Type: UNITOWER B1.5 Built: 2018 Still in operation! Number of storage spaces: 86 Pallets size: Usable dimensions: 3000 x 1500 x 90 mm – L x W x H External dimensions: 3290 x 1616 x 160 (70) mm – L x W x H Payload per pallet: 1500 kg Use for surface elements made of wood, polycarbonate, etc. Only about 300 movements have taken place since 2018 - one movement takes about 2 minutes. The system is regularly serviced by the manufacturer. Speeds Hoist: 16.0 m/min. Pull and push device: 20.0 m/min. System dimensions approx.: 8855 x 5900 x 5730 mm – H x L x W

Glass Slices Cutting Table Used HEGLA VSG A 37 Year: 1997 Total dimensions: approx. 11.5 x 4.4 x 2.5 m Hydraulically tiltable loading table with air cushion and conveyor belt The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

VSG glass cutting table with roller conveyor and conveyor belts used Manufacturer: BYSTRONIC Year: 1996 Cutting width max. approx. 306 cm Dimensions cutting table total approx. 8 x 5 x 1.8 m Dimensions roller conveyor approx. 6 x 3 x 1 m The roller conveyor can be tilted hydraulically Conveyor belt approx. 6 x 3 x 1 m Conveyor belt approx. 3 x 3 x 1 m Table approx. 2.7 x 3.5 m The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

VSG Cutting table with roller conveyor used Manufacturer: LISEC/ BYSTRONIC Year: 1996 Cutting width max. approx. 306 cm Dimensions cutting table approx. 7 m, 3.8 x 1.1 m; Dimensions roller conveyor approx. 6 x 3 x 1.1 m; The roller conveyor can be tilted hydraulically. The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 max pane height approx. 230 cm Total dimensions of the line approx. 12 x 1.2 x 4.4 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 The line includes glass grinding line, washing line, drying and gluing line for making laminated glass and insulated glass panes Total dimensions of the line approx. 24 x 3.5 x 3.1 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Klöckner-Moeller Track System BD O-100 A Klöckner-Moeller Busbar system BD O-100 A 500 V Track 160 cm 120 pieces 192 meters More items - new and used - can be found in our shop! International shipping costs on request!

Corona pretreatment for film Roller width = 2700 mm, Electrode width = 2500 mm, Speed = 250 m/ min electrodes = ceramic, Unloading roller = ceramic, Generator power = 6000 W, with 2 leaning rollers