other machines and plants used for sale (20,346)

High Speed Checkweigher used Manufacturer: WIPOTEC-OCS GmbH, Kaiserslautern Type: HC-A-VA-3000-3 Year of Make: 2022 Machine number / S/N: 1010303 Model Number: 71010303 Load cell up to 750 g Weighing range: Min. 20 g to Max. 150 g (e) calibration value 0.1 g, (d) display value 0.01 g Throughput 400 pieces/min Speed 1.2 m/s Blow-out nozzles and ejection box Documentation available excellent condition

Granulator used Manufacturer: Alpine Type 20/12 Ro Rotoplex with 4 sieve inserts Nominal power 4 kW Rated speed 1500 rpm Knife circle diameter 200 mm Rotor blades Number 2 pieces Stator Knives Number 3 pieces Available now! very good and functional condition Documents available

An i-Pulse SMD placement machine with IQ Vision, a subsidiary of Yamaha, is available. PCB thickness range: 0.4mm-4.8mm, min. PCB dimensions X/Y: 50mm/30mm, max. PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production output: 24000CPH. Placement accuracy CHIP: +/-0.04mm, placement accuracy IC: +/-0.025mm, placement angle: +/-180°, max. component size range: 0402-120mm/90mm, max. component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Including 3x feeder carriages and 2x tray feeders for installation in the machine. Documentation available. On-site inspection is possible.

A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

A PCB destacker (PCB feeder) for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed: 12m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB thickness range: 0.6mm-4mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, max. PCB stacking height: 220mm, machine dimensions X/Y/Z: approx. 700mm/1000mm/1300mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.

A measuring device for the characterization of particles, emulsions, colloids and biomolecules in liquids is available. Laser power: 4mW, wavelength: 632.8nm, primary measurement function: zeta potential measurement, particle size measurement range: 3.8nm-100µm, software compatibility: Zetasizer v8.01 with GAMP5 conformity. Zeta potential measuring range: +/-500mV, measuring principle: DLS and laser Doppler electrophoresis, min. sample volume: 12µL, measuring angle range: 13°-173°. Machine dimensions X/Y/Z: approx. 500mm/300mm/240mm, weight: approx. 15kg. Including 2x used and 1x brand new flasks. The machine was serviced in 2024. Documentation available. On-site inspection is possible.

Measuring length: 500mm, measuring diameter: 160mm, max. workpiece weight: 15kg, axes: 4, measuring mode: optical/laser/fiber probe. Including hydraulic chuck and fiber insert for Werth Fiber Probe. Documentation available. On-site inspection is possible.

EFCO glass tempering machine 750 °C Thermal glass tempering system for the production of toughened safety glass / ESG For sale is a professional, industrial glass temperer from the renowned British manufacturer EFCO Furnaces Ltd. The system is ideally suited for the thermal tempering of flat glass for the production of toughened safety glass (ESG). System Components & Structure Furnace inlet & roller conveyor: The horizontal roller conveyor automatically transports the glass panes through the safety gate into the closed heating chamber (furnace). Cooling system / fans: Powerful centrifugal fans (blowers). These are essential for the thermal tempering process, in which the heated glass is abruptly cooled with air ("quenched") to create the necessary surface tension. Outlet & quenching area: A precise roller conveyor with ceramic or special rollers on whi ...

ID3887 Esta Dustomat 4-24 year/Year of construction 2023 Dust extraction system, Vmax 3,300 m³/h Dedusting system, Vmax. 3,300 cbm/h

I offer a very well-preserved Aquatech CH 280 chiller with integrated pump and buffer tank from 2015. Until a few days ago, the machine was still running and supplied a climate chamber with cold water. There is also an exhaust duct arch.

1 Gebr. Hydraulic Hose Cutting Machine, Fabr. Aeroquip, Type 18 M3

1 gebr. Hydraulic Hose Test Bench Manufacturer: Peters Maschinenbau GmbH Type designation: NIVES Type: 35A Technical performance dataMaximum test pressure: Up to 1,600 bar (display on the VDO large pressure gauge) Pressure gauge: VDO test pressure gauge (measuring range 0–1,600 bar) Additional pressure gauge: Festo pressure gauge for control/pneumatics High-pressure components: Components from Autoclave Engineers are installed

Technical data & equipmentManufacturer: BORRIES Markier-Systeme GmbH Intended use: Legally required, permanent marking of hydraulic sockets, press fittings and metallic round parts (e.g. marking of standards, batch numbers, manufacturer's marks or hose types). Drive & control: Electromotive drive with built-in control cabinet. Operating modes: Manual / set-up mode / automatic mode (selectable by key switch). Safety: Integrated two-hand safety control (start button at the front) and main switch with emergency stop function. Tool holder & mechanics: Adjustable type wheel / embossing head for holding number, letter and symbol stamps. Manual height adjustment / height adjustment via handwheel for different valve diameters. Mechanical prism holder / bracket for cylindrical components and hydraulic sockets. Incl. accessories

1 gebr. Assembly machine for hydraulic hoses 1 Gebr. Hose peeling machine for hydraulic hose assembly Function: Precise removal of the outer rubber top layer (and optional inner layer) of high-pressure hydraulic hoses to expose the steel wire mesh before crimping Drive: Three-phase gear motor (SEW-Eurodrive) Clamping & Feed Mechanism: Manual hose inner staple clamping / prism parallel clamp via hand crank/lever Longitudinal feed via stable guide carriage with hand lever Safety & Protection: Foldable protective cover over the rotating peeling head

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Cheng Shin, complete wheel with tire and rim -Tire size: 13x5.00-6 -Bolt circle: Ø 90 x 11 mm -Hub bore: Ø 63 mm Quantity: 1 piece available -Dimensions: Ø 325 x 110 mm -Weight: 7.8 kg

TRUMPF TRUMATIC L 3030 – CNC laser cutting machine – built in 1999 For sale is a TRUMPF TRUMATIC L 3030 CNC flatbed laser cutting machine from 1999. Basic technical data: Manufacturer: TRUMPF Model: TRUMATIC L 3030 Year of Make: 1999 Machine Type: CNC Laser Cutting Machine Laser type: CO₂ laser Working range: 3,000 × 1,500 mm Travel Z-axis: approx. 115 mm Maximum workpiece weight: approx. 710 kg Control: Siemens Laser power: 3,800 W Operating hours: 73,392 h Other information: Machine condition: used Functionality: defective / has various error messages Accessories: automatic pallet changer, extraction and filter system, cooling, cutting heads Location: 35708 Haiger Viewing possible by prior arrangement.

3 Electrolysis for precious metal recovery, e.g. silver recovery Electrolytic Silver with usual signs of use Price is exclusive of VAT

Water consumption per cycle: 35/40l, electrical connection: 36A, connected load: 22.5kW, length: 640mm, width: 640mm, height: 640/1000mm, an on-site inspection is possible.

End-facing slides: 7, upper chamfering slides: 3, lower chamfering slides: 3. Inspection possible by appointment.

Stamping crucible throttled, work surface 72 x 102 cm, 1 frame, various operating modes, single cycle, continuous operation, programmable with timer, safety mats

An automated acid hydrolysis system for fat determination with 6 sample positions is offered. Sample configuration: 3 chambers with 2 tubes each. Degree of protection: IP20. The system is designed for automated acid hydrolysis for fat determination. The process takes place in an enclosed room. Inspection possible by prior arrangement.

A complete dental CAD/CAM system with a dental milling machine, 3D dental scanner, CAD/CAM software and extensive accessories is offered. The system consists of a DCS PRECIMILL M4 dental milling machine and a DCS PRECISCAN D4 scanner. Inspection possible by prior arrangement.

Tube furnace Manufacturer: Nabertherm Type R170/750/12 Year of construction 2019 These compact tube furnaces with integrated controls can be used universally for many processes. Equipped with a standard C 530 ceramic working tube and two fiber plugs, these tube furnaces have an unbeatable price-performance ratio. • Tmax 1200 °C • Single-zone design as standard • Double housing made of textured stainless steel sheets • Only fibrous materials that are not classified as carcinogenic according to TRGS 905, Class 1 or 2 are used • Outer tube diameter 170 mm, heated length of 750 mm • Work tube made of C 530 ceramic with two fiber connectors as standard equipment • Tmax 1200 °C: Type N thermocouple • • Solid-state relays ensure low-noise operation • Defined application within the limitations of the user manual • NTLog Basic for Nabertherm controlle ...

Ball Mill GMP Manufacturer: Pharmag consisting of Pharmag Universal Actuator Type UAM and the BM-5 Stainless Steel Ball Mill Year of construction 2021 very good condition Documents available, incl. qualification.

Drying cabinet Manufacturer: Memmert Type UM

Standard observers: 2° (1931) and 10° (1964), standard illuminants: D65, D55, F11, A, C, color spaces/values: XYZ, Yxy, LCh, Luv, ΔE CIE Lab, ΔE CIE94, ΔL, Δa, Δb, yellowness index according to DIN 6167 or whiteness metrics, spectral range: 400-700nm, spectral resolution: 10nm (internally 3.5nm), spectrometer: holographic grating spectrometer, display: relative values, absolute values or customer-specific values, repeatability: ΔE = 0.05 CIE Lab, repeatability test: 10 measurements of the supplied white standard, memory: non-volatile, more than 1,500 measurements without a PC, ambient temperature: 15-35°C, max. relative humidity: 85%, non-condensing, PC interfaces: USB, RS232, current output: 4-20mA, length: 235mm, width: 220mm, height: 60mm, weight: 1.85kg, including original operating manual, USB flash drive with installation file for ColorDaTra_IPM software version 1.94, inst ...

Year of Make: 2019 Drive: 59 KW Temperature: 250°C Volt 3 x 400 PNE HZ: 50 Amp. 86