other machines and plants used for sale (15,517)

Compressor COMPAIR L22 SR-10 Volume 2.86 m³/min Properties: Identification number 100016088/0009 Built-in compressor 6115 Order no. 10698941 Compression medium AIR/LUFT Length 800 mm Width 700 mm Total height 1400 mm Weight 355 kg Volume flow 2.86 m³/min Suction pressure 1 bar Step pressures 10 bar g Speed 3600 min ̄¹ Installed motor power 22 kW Voltage 400 V Phase 3 Ph Frequency 50 Hz

Compressor type Champion 135 TS Volume 12.8 m³/min Properties: Identification number 449001/50 Order no. 50352400 Built-in compressor 50 Compression medium AIR Length 2400 mm Width 2400 mm Total height 2100 mm Weight 2480 kg Volume flow 12.8 m³/min Suction pressure 1 bar Step pressures 1.8 / 7 bar g Speed 1000 min ̄¹ Installed motor power 75 kW Motor revolutions 1000 rpm

Dryer ComAir DEMAG CAD 430 W/292 W Properties: Total height 1900 mm Length 1200 mm Width 1400 mm Type CAD 430 W/292 W Machines Serial No. 00/4/14381/01 Engine power 4.7 kW Permissible pressure/max. pressure refrigerant side 16/20 bar Permissible pressure/max. pressure compressed air side 16 bar Ab. Ambient temperature min./ max. +2/ +50 °C Operating voltage 400 V Phase 3 Ph Frequency 50 Hz Nominal consumption 4,700 kW Protection class IP 54 Refrigerant R 134a Description: Largest refrigerant machine charge weight 7,500 kg Fuse/Fuse max. 20A Test Group (DruckbehV) I

Dryer Type SD 085W Type 419 Properties: Type SD 085W Type 419 Machines Serial No. 003 / 14279 / 07 Overall length 900 mm Width 900 mm Total height 1900 mm Engine power 1.36 kW Description: Refrigerant: R 134a / 1.50 kg P SHP 20 bar P SLP 16 bar t o +2/ +50°C Compressed air: p s 16 bar t s 60 °C t o +2/ +50°C 220-230V1N ͂/50Hz 1.36 kW 16A / IP 20 RWTÜV Reg. No. 2541/98

Dryer type SD2250/426W Properties: Type SD2250/426W Machines Serial No. 021 / 15089 /07 Total length 1300 mm Width 1400 mm Total height 2000 mm Engine power 2.9 kW Description: Refrigerant: R 134a 7.5 kg P SHP 20 bar P SLP 16 bar t o +2/ +50°C Compressed air: p s 16 bar t s 60 °C t o +2/ +50°C 380-400V3 ͂/50Hz 2.90 kW 20A / IP 54 RWTÜV Reg. No. 2540/98

Compressor Type Champion 180 TS Properties: Identification number 449001/158 Order no. 10095340 Built-in compressor 158 Compression medium AIR Length 3050 mm Width 2100 mm Total height 2100 mm Weight 3860 kg Flow rate 17.0 m³/min Suction pressure 1 bar Step pressures 22 / 12 bar g Speed 1000 min ̄¹ Installed engine power 110 kW

Compressor Type Q52 - 8.0 W Properties: Type Q52 - 8.0W Identification number 052-000103 Order no. 14988/ 14989 Compression medium AIR/LUFT Length 2500 mm Width 1800 mm Total height 2000 mm Weight 2600 kg Volume flow 51.6 m³/min Suction pressure 1 bar Full load current 525 A Step pressures 8 bar g Speed 60600 min ̄¹ Installed motor power 300 kW Voltage 400 V Phase 3 Ph Frequency 50 Hz

Evaporator/ Evaporator/ Evaporation 52,000 litres of milk /at 7.5% - 10% fat content Description: At 7.5% fat content, 50% water = 26,000 litres At 10% fat content, 66% water = 17,333 liters

Counting machine tested and cleaned.

A treatment chair Ritter for a dental facility is available. Components: patient chair, dentist’s unit, assistant’s unit, operating lamp, spittoon, and ultrasonic scaler. The electronics have a problem. An on-site inspection is possible.

Inverter heat pumps / chiller air-cooled reversible, Type: iHCY 020 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 020 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation up to -15 / -10°C suction temperature. Including crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 6.43 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 1.13 Available pump pressure bar: 0.84 Ambient temperature °C +7 Cooling capacity kW 5.46 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 0.971 Available pump pressure bar: 0.893 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 3.06 Max. current (A) 11.43 Starting C ...

A precision glass grinding machine Carl Zeiss for pre-grinding optical workpieces is available. Workpiece spindle speed: 125rpm, tool spindle speed: 7000rpm, feed: 6mm/min, roundness and flatness accuracy: +/-0.005mm, swivel range: 50°, permissible repeatability: +/-0.01mm, measured repeatability (1990): +/-0.005mm. Documentation available. An on-site inspection is possible.

Technical data of the steel girder: Manufacturer: Stow Type: Pal Rack NS The scope of delivery includes: 01x Steel beams, used Material colour: orange Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Overall length: 3,835 mm Note: The steel girders were attached to a length of between 2,700 - 2,800 mm welded on a plate. (Dimensions: approx. 200 x 110 x 50 mm (LxWxH) Since these are second-hand goods, scratches, damage, welds or rust roots! General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible.

A cutting, creasing, and scoring machine Bahmüller is available. Passage width: 2300mm, min. strip width: 230mm, passage speed: 150m/min, cutting and creasing roller diameter: 127mm, height adjustment: 20mm, table dimensions X/Y: 2600mm/1480mm, cutting width: 2200mm, circular knife outer diameter: 220mm, coarse scoring outer diameter: 200mm, min. coarse score distance 1/2: 60mm/0mm, fine score distance 1/2/3: 28mm/5mm/15mm. Processes: cutting, coarse scoring, fine scoring, scoring with version R, vacuum feed with version V, and ruler insertion with version L. Machine dimensions X/Y/Z: approx. 2850mm/2600mm/1200mm, weight: approx. 4800kg. Documentation available. An on-site inspection is possible.

Separator GEA Westfalia Type: MSE 100-06-177 Properties: Manufacturer: GEA Westfalia Type MSE 100-06-177 Machines No. 1731-518 Year of construction 2012 Engine power 37 kW Total height 2150 mm Width 1600 mm Length 2000 mm Description: The separator is a cleaning separator to remove solids from milk/juice, etc. No cream separator that separates skim milk and cream! Part 1/3 - Separator Dimensions: Width: 1,600 mm Length: 2,000 mm Height: 2,150 mm Part 2/3 Control cabinet Dimensions: Width: 800 mm Depth: 400 mm Height: 2,100 mm Part 3/3 Tools

Right-angle gears, as good as new

Pneumatic diverter, electric, as good as new

Tobacco cutting machine from the company Fly Mak, almost new (2023), hardly running. Adjustable to different cutting sizes from 0.02 mm to 20 mm. There is also a knife sharpening machine. Fpsbmkowdatlo Df Tuok Capacity: approx. 200 kg/hour

Rotary valve 1.1 kW, as good as new

Hardly used, in very good condition. There is no longer any need for sale.

Gear Motor - Motor: Motovario, Gearbox: Neri Motori 2.2 kW

Right-angle gears, as good as new

150,000 litres of V2A horizontal hard water/soft water tank Properties: Volume 150000 L Material V2A (AISI 304) 1.4301 Total height 4200 mm Inner diameter 3600 mm Overall length 13500 mm Cylinder length 12000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Description: Tank 1/2 - hard water tank Tank 2/2 - Soft water tank Tank crest: Ventilation nozzle Filling nozzle 2 CIP balls In front: Cone base Manhole 450 x 350 mm oval Residual drain with flanges with disc valve Thermometry Tank body: Reinforcement rings Behind: Cone base

1,000 litre water tank/ storage tank made of V2A Properties: Volume 1000 L Material V2A (AISI 304) 1.4301 Total height 2000 mm Cylinder height 1100 mm Diameter 1000 mm Weight 170 kg Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground

800 litre cleaning tank/ storage tank made of V2A Properties: Volume 800 L Material V2A (AISI 304) 1.4301 Total height 2600 mm Cylinder height 1100 mm Inner diameter 1000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Last Use: Chemical Industry Description: Topsoil: curved bottom Threaded Socket DN 65 Manhole DN 400 Agitator with steam heating inlet Tank cylinder: Beading Subsoil: Cone base screwed on with pedestal forward-drawn residual drain pipe with disc valve DN 50

Geared motor

Travel X/Y/Z: 4000mm/1800mm/2500mm, max. length measurement error: 55 + L/35, max. single-point error: 35, control: WPC 2040. Includes test head PH10M Plus, PHC10-3, sensor TP20, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.

A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025.

A vertical glass storage cabinet TMB with integrated lighting for inspecting glass sheets is available. Load capacity: 2000kg, machine dimensions X/Y/Z: approx. 6550mm/1250mm/3600mm, weight: approx. 1750kg. The lighting may need to be checked and possibly replaced. An on-site inspection is possible.