other machines and plants used for sale (15,517)

Description: Operating pressure test: 6 bar Engine: 37 kW - With connections: suction side: flange DN 80 and pressure side: flange DN 150 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1100 mm Width: 650 mm Height: 1120 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.

Description: Rotary Lobe Pump Flow rate: 2.0 m³/h Operating pressure test 0.8 bar Motor: 1.1 kW - With connections: suction side DN 40 and pressure side: DN 40 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1100 mm Width: 620 mm Height: 1100 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.

Eccentric screw pump with 19 m³/h capacity Description: Operating pressure test: 6 bar Motor: 7.5 kW - With connections: suction side: flange DN 85, Print side: DN 100 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1200 mm Width: 410 mm Height: 1000 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.

For sale: Workshop crane KR-F50H without ballast filling Specifications: Manufacturer: Meiller (DE)· Metrics: Chassis width 810 mm Chassis length 1330 mm Overall height 1740 mm Chassis width: 810 mm Chassis length: 1330 mm Height/ Boom: - Height of hook boom extended: 3200 mm - Height of hook boom inserted 2400 mm Other: - Wheel Ø 200 mm Polyamide tyres -Load capacity: 500 kg -Load capacity at boom radius kg/mm: 500/830 435/980 370/1130 330/1280 300/1430 275/1580 250/1730 Equipment: 1x Hydraulic hand pump with hand lever and finely adjustable drain valve Chassis securing by foot brake RAL 2000 lacquer (orange-yellow) With minor rear-end collision damage or transport damage. Otherwise like new, never used! NP:4628 Euro

3-deck swashscreen in stainless steel design (polished surfaces) with a screening area of 2.60 m² per deck, drive 4.0 kW via V-belts, equipped with sight glasses for screening material observation. Including 3 screen inserts (various mesh sizes available); Ball knocking devices and balls are available for an extra charge.

1-deck swashscreen in stainless steel design with a screening area of 3.90 m² per deck, drive 5.5 kW via V-belt, equipped with pneumatic deck lifting system and clamping bracket system for easier screen change, incl. 1 piece sieve insert and 1 piece ball knocking device, also in stainless steel design.

1-deck swashscreen (expandable to 2 decks) with a screening area of 1.80 m²/deck, drive 4.0 kW via V-belt (engine renewed). Including 1 pc. sieve insert (not strung; stainless steel blank).

1-deck swashscreen with a screening area of 0.72 m² per deck, drive 1.5 kW via V-belt (engine renewed). Including 1 piece sieve insert (current mesh size approx. 20 mm).

Printing units outside/inside: 3/1, doctor blade units: available, envelope size range: booklet min./max.: 100mm/150mm–180mm/254mm, pocket min./max.: 89mm/120mm–187mm/305mm. Documentation available. An on-site inspection is possible.

Printing units outside/inside: 2/1, doctor blade units: 3, production capacity: 800 envelopes/min, window unit: Mini-Splice 356 CMG, roll/splicer: Winkler + Dünnebier 191, web guiding: BST EKR 1000, gumming: standard remoist (moisture-activated gumming for sealing flaps), ink pumps: 2, extraction: window punching waste. Documentation available. An on-site inspection is possible.

Batch mixer for the production of chemical products, foodstuffs, building materials, plastics, animal feed, etc., max. usable volume: 2,000 l., parts in contact with the product made of stainless steel 1.4301 (AISI 304), mixing unit drive 30 kW (with external fan), equipped with 2 cutting rotors (18.5 kW each), 2 liquid lances for injection directly onto the cutting rotors and pneumatic spiral cleaning. Emptying via pneumatically operated bottom flap. The scope of supply also includes: control cabinet with frequency control for the mixing unit (0.25 to 2.8 m³/s circumferential speed), weighing frame with 4 load cells, 4 machine feet to raise the mixer body, jet-cleaned cartridge point filter with 4 m² filter area and 3 kW blower (ATEX, 2,580 m³/h air flow), silencer, water dosing and technical documentation. Available for an extra charge: Suitable frame for filling the mixer  ...

A robot automation cell WU Mechanische Werkstätte with a Fanuc robot for product handling for a lathe is available. Gripper system: double gripper, gripper manufacturer: Schunk, robot type: Fanuc M20iA 35M, robot axes: 6, max. payload: 35kg, robot reach: 1810mm, machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm, weight: approx. 2000kg. Lathe power-on time: approx. 34000h, servo-on time (cell): 5700h, mechanical operating hours: 615h. This is only the automation. Documentation available. An on-site inspection is possible.

A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible.

Haas Laser HL 1203D Optics Construction: 22-31-21-BX Laser class 4 1500 W 1064 nm More items - new and used - can be found in our shop! International shipping costs on request!

This is a side seam wicket bag machine Lemo Intermat 850 STN-CP Knoter, production type: wicket bags for bread, chicken, diapers, toilet paper, hygiene products and other types of wicket bags, number of lanes: single lane / lane wicket, processable materials: LDPE, HDPE, PP and recycled extracts, sealing width (bag length): 120-450mm, draw length (bag width): 200-850mm, gripper arm length: 600mm, max. linear speed: 65m/min, output capacity: 140 knot bags/min, max. number of bags per stack: 250, drive system: PLC-controlled, operator interface (terminal), print mark control, servo motor drive, nip feed rollers, sealing bars. Attachments and accessories: bottom gusset (only bottom gusset included), handle unit, longitudinal sealer, pre-sealer, angle sealer, cross sealer, handle punch, photo cell for printed film, automatic one-step conveyor (index conveyor), handle hole punch, G-gusset uni ...

Specifications: - Machine for the production of longitudinal folds on the edges - square or rectangular longer channels and - Number of roller shafts with folding rollers 15 pcs - Material thicknesses from 0.5 - 0.63 mm - Duct dimensions from 80 x 80 mm - up to 100 x 100 mm - from duct dimensions 100 x 100 mm - Material thicknesses 0.5 to 1.0 mm - Throughput speed 15 m/min - Pneumatic connection - Drive 400 V / 3 kW -with: - E. - Footswitch - Duct baffles - Separate lubrication device - Space requirement approx. W 5400 x H 1200 x D 800 mm - Weight approx. 950 kg

Seho 8040 PCS with laminar and turbulent wave, preheating with heating plates and IR radiator, minimum quantity flux system, component cooler at the outlet, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, solder nozzle: Delta B, max. wave height: 8mm, solder volume: 400kg, heating capacity solder pot: 9kW, heating-up time 20-250°C: approx. 150min, heating-up time 190-250°C: approx. 60min, preheating zone length: 700mm, three heating zones: 3x 3kW, max. preheating capacity: 9kW, transport angle: manually adjustable, 6-8°, transport speed: 0.5-2m/min, running direction: from left to right, with loading aid/slide conveyor (1000mm), unloading aid (500mm) and entry stopper for solder frame separation, exhaust connection diameter: 2x 150mm, extraction capacity per connection: 500m³/h, supply voltage (50Hz): 230/400V, rated power: 3 ...

Parts: -Pelvis -Trolley -Filter -Rectifier -Product carriers -2x supply air system -3x exhaust air system -Refrigerator Specifications - 1 (line) - 1 x (wet turner) Cr Active - 111 Deco Chrome 112, 113, 114 Standing Sink 114 Sinks 116,117,118 Hot Rinsing 123 Dryers 124, 125, 126, 127 Speicher 129 - 141 Unloading Correction Station 142 - 150 El. Stripping 151 - 154 Sinks 155, 156 Stripping Nitric 157 - 161 Sinks 162, 163 Warm Rinse 164 Dryer 165 Speicher 166 - 172 Loading Correction Station 173 - 181 Memory 182 - 209 - - 2 (Line) Sinks 394, 393 PNS 392 Sinks 391, 390 MPS 389 Sinks 388, 387 Free court 386 Satin 385 - 383 Sinks 382 - 378 Gloss NI 377 - 374 Half Gloss 373 - 370 Bdobqwaov Ernfoltljg Sinks 369 - 367 Decapitate 366 Anodes 365 - 363 Sinks 362, 361 Copper 360 - 349 Sinks 348 - 346 Chem. Ni 345 - 342 Sinks 341 - 339 Accelerators  ...

Drum mixer for e.g. plastic granules or other Capacity 50kg (2 bags) granules + masterbatches Including approx. 18 usable barrels, 2 of which are made of metal

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

Hot stamping hand lever press, embossing foils, silver gloss and gold luster among others are included Note: The operating hours are unknown. The entry 99999 hours is only pro forma and does not correspond to the actual hours

Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible.

Features: belt feeder, Ero gluing system (cold glue, 4 nozzles), folding unit, pressing belt, max. sheet size: 60-800x126-1100mm, production possibilities: straight line, crash lock bottom, 4- and 6-corner, double-wall boxes and file covers/piches/envelopes, board thickness: 200-800g/m², corrugated board: N-, E-, F-flute, max. belt speed: 320m/min, shaking speed: 20m/min, main motor power: 11kW, total power requirement: 35kVA, max. air consumption: 0.7m³/min, length: 12,700mm, width: 2600mm, weight: 7t. Operational hours counter: 1494h. An on-site inspection is possible.

x-travel: 1500 mmy-travel: 800 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 2,66 x 1,60 x 3,10 mCNC-controlled Coordinate Measuring Machine for fully automaticmeasuring of workpieces. Incl. Measuring Software MDM Metrosoft Level 2 for measuring of:- Points, surfaces, circles, cylinders, cones, distances and angles.- SPC software for statistic evaluation of the measurementsMachine not operational!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An SMT pick-and-place system that can be used as a standalone or inline machine. With single head with laser centring, upward-facing camera and display. Voltage: 230V, the machine has been regularly serviced, with accessories. On-site viewing is possible.

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

A total of 6 horizontal bag sealing machines Joke with vacuum and large container function are available. Seal length: 1000mm, sealing method: impulse sealing, sealing performance: 2x0.4mm, seam width: 6mm-8mm, rail opening: 30mm, throat depth: 153mm, machine dimensions X/Y/Z: approx. 1300mm/1100mm/1950mm. Documentation available. An on-site inspection is possible.

A thickness measuring device Scantech is available. Measuring frame width: 2500mm, sensor power: 5keV-15keV, max. web width: 2100mm, max. web speed: 200m/min, product tolerance at 57µm-63µm: +/-5%, measuring accuracy at 60µm: +/-0.3µm, max. ambient temperature: 45°C, orientation: Left-B. Machine dimensions X/Y/Z: approx. 3250mm/300mm/900mm, weight: approx. 400kg, control: Flexscan 6, interface: OPC-UA. Components: scanner, HMI, IO box, and various small parts. Documentation available. An on-site inspection is possible.

A roll slitting machine Euromac is available. Materials: monolayer plastic, laminates, extrusion film, paper, metal foil, and aluminium laminates. Working speed: 300m/min, film width range: 500mm-1300mm, max. roll diameter: 920mm, roll core diameter: 76mm/152mm (3 inch/6 inch). The system can only unwind and trim. Without 100% web inspection. Includes Sick safety device. Documentation available. An on-site inspection is possible.

Screw compressor Kaeser type DSG 290-2 SFC A Properties: Type DSG 290-2 SFC A Order no. 4500217106 Length 3450 mm Width 1800 mm Total height 2400 mm Material No. DSG2.3 Manufacturer Serial No. 1117 Rated power 200.0 kW Speed 2982 min ̄¹ Max. operating overpressure 8.5 bar Ab. Ambient temperature min./ max. 3/40 °C