other machines and plants used for sale (14,190)

Compressor AIRCRAFT ACS Duo -used screw compressor, incl. refrigerant dryer, incl. condensate conditioner, automatic steam trap---------- Technical data ----------container size: 2 x 100 litres, Flow capacity: 360 litres, Maximum pressure: 10 bar, Engine: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 69 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kgQuality info: - Complete basic cleaning- Electrics checked - immediately ready for use

2 independently working cutting bridges 2 working zones (1750x1000mm each) High-performance vacuum turbine X servo drive; Y and Z axes 2 high-luminosity projectors Windows 7 operating system Calculator with CNC interface, modem and Ethernet card

1 needle flatbed quilting machine

Single Needle Double Lockstitch Flatbed Machine

1-needle double lockstitch quick sewer

Compressed air-cleaned dust filter with stainless steel housing, filter area: 10 m², filter media: 4 filter cartridges, incl. ESM-3 control unit and manifold for flange mounting on the underside. Filter was used for dedusting a horizontal mixer for mineral building materials.

Wide-chamber pin mill with grey cast iron housing, output / throughput: 600 kg/h max. (depending on material), required motor power: 12 kW to 22 kW (optional). Rotor and stator disc in very good condition. Cleaned, anti-rust primed and repainted. Rust protection inside can be easily removed before commissioning.

Round feeder for dosing difficult-to-flow materials, container dimensions: approx. 1,250 mm Ø x 1,500 mm high (= approx. 1,700 l. useful filling). Discharge via 4-arm ground agitator with wall scrapers and adjustable slide / weir. Drive via SEW geared motor with 11 kW. Most recently used in ceramics production between intensive mixer and extrusion press.

1-needle flat quilting machine, upper and lower wheel transport

Single Needle Double Lockstitch Flat Sewing Machine with Underfeed

Batch ball mill made in Germany with a gross volume of 400 l., drive via V-belt and gear motor with 2.2 kW, iron-free lining (aluminium oxide), previous use: glaze production in the wet grinding process. Cleaned, repainted and restored. Available for an extra charge: iron-free grinding media (balls, alubit).

Single-swing jaw crusher with an internal width of 500 mm x 350 mm. The lower gap is adjustable from approx. 30 to 80 mm. Throughput (depending on the selected gap width and the material to be crushed): Between 9 and 30 tons/h. The crusher ran smoothly until the removal and the scope of delivery includes 2 suitable, unused crushing jaws. Additional spare parts / wear parts are available for an extra charge.

Stainless steel batch mixer with a gross volume of 600 l. (max. usable capacity: approx. 400 l.), centrifugal unit equipped with ploughshares, drive via geared motor with 11.0 kW, outlet flap pneumatically operated, without control cabinet. In very good condition of wear.

feed pressure: . barliter capacity: . ltotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mPump aggregate The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used heating container from our own plant construction, optionally with oil or gas firing, ideal for failure prevention or bridging in the high output range (e.g. industry, residential complexes, etc.), integrated heating oil tank.

Suction Collector Suction Bell -used----------- Technical Data ----------Connection Socket: 350 mm, Socket: 5 pieces, Nozzle diameter: 2x160.2x100.1x120 mm

Gun Cleaning Device MARX PWA 900 -Used-Stainless Steel Housing Parts, Timer, Rinse Nozzle---------- Technical Data ----------Dimension (LxWxH): 670 x 510 x 370 mm, Compressed Air: 6 bar

Table milling machine MARTIN -used-finely adjustable milling fence, clockwise/counterclockwise rotation---------- Technical data ----------table size: 1,000x930 mm, work table height: 860 mm, spindle diameter: 40 mm, useful length milling spindle: 160 mm, max. cutter diameter: 255 mm, max. retractable cutter diameter: 255 mm, height adjustment: 150 mm, speeds: 3,000/4,500/6,000/9,000 rpm, motor: 4.7/5.7 kW, extraction nozzle Ã: 120 mm, Dimensions (LxWxH): 1,000x930x1,050 mm

Cross-cut saw BERG & SCHMIDT Junior 275 -used-underframe, driving device---------- Technical data ----------cutting height: 60 mm, voltage: 230 V

Suction Collector Suction Bell -used----------- Technical Data ---------- Connection Socket: 300 mm, Socket: 5 pieces, Nozzle diameter: 160 mm

Feeder MAKA -used-stepless feed speed---------- Technical data ---------- rollers: 3 pieces

Frame clamping element (WS15) WOOD-HE-USED-ATTENTION: SET-Price for 4 pieces !, Clamping cover type O, Tension on console by toggle switch, opening / closing by toggle switch---------- Technical data ----------Clamping range: 40 - 115 mm

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m

Cutting and straightening system Reinforcing steel processing Manufacturer: PROGRESS 2 bending units for the production of brackets. Making straight iron to length. Or straight irons with hangers. Roller conveyor 14 m Hydraulic shears up to 9 m Computer-controlled Software latest version 2019 Good condition. Export/price net ex location S-Anhalt 18,000,-- € I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are net. If you don't like the price, please let me know your ideas. I am committed to realizing a price that meets your expectations. I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 62 ...

VITO XS Vacuum Filtration System VITO X is best suited for restaurants, bakeries or establishments with a high frying volume. The VITO XS cleans the frying oil, holds it in its 40 l tank and offers easy, hygienic transport in the kitchen. Thanks to its unique vacuum filtration, the particles remain in the filter when dry. Like every VITO frying oil filter, the XS also offers a fine filtration of 5μm and thus the optimal quality of your oil is maintained. The unique design ensures that it also works at temperatures of 200°C, but at the same time offers the highest level of occupational safety. After filtration, the oil can simply be pumped back again. Advantages: Great savings potential Optimal quality Less work Filtration capacity: up to 30 L/min Filtration: up to 5μm Material: Stainless steel 1.4301 Weight: 45 kg Max. oil temperature: 200°C Tank capacity: 40 L El ...

Sliding table saw ALTENDORF WA 6- Exhibition machine - manual height adjustment, double trolley, scoring unit, swivelling, boom table, angle mitre stop, automatic brake, lowerable below table height---------- Technical data ----------swivel range: 0 - 45 Â, cutting length: 2,500 mm, cutting width at the parallel fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ã: 315 mm, Swivel range mitre stop: up to 49 Â, speeds: 4,200 rpm, motor power main motor: 5,