other machines and plants used for sale (14,190)

Water bath / Shaking water bath Manufacturer Nickel-Electro Ltd. Clifton Type NE 5 – 28 D Capacity 28 litres Power 1000 watts Temperature range +5°C – 100 °C PiD control Test tube rack Simultaneous observation of the set and actual temperature

Continuous twin-shaft mixer with multi-plate clutch, suitable for vacuum operation. Mixing trough and double cylinder length: 1,500 mm + 500 mm, mixing trough width: 700 mm.

Robust smoothing mill with a roll diameter of 1000 mm and a roll width of 800 mm, including drives and auxiliary drives. Current residual sheath thicknesses: 80 mm / 85 mm. Optionally available: 1 set of new roller shells.

Multi-bucket excavator

Breitenbach Press Press with the twin-shaft mixer

Rolling mill 800x800 mm, built in 1988 Roller casing table: 70 mm

Rolling mill 800x800 mm, built in 1996 Roller shell thickness 60 mm

Completely overhauled screen round feeder with a diameter of 1,900 mm. In the course of the overhaul in 2025, the gearbox was completely dismantled and cleaned, all bearings and shaft seals were replaced, a pinion shaft and a bevel gear were reupholstered. The oil pump and the platter drive were overhauled, oil heating systems were renewed, etc.

Batch tumbler mixer with parts in contact with the product in stainless steel (drum made of VA 1.4541), gross volume: 1,000 l., usable volume: 600 l. (max.). Filling and emptying via pneumatic flat slide valves from Jaudt. Including modern control with Siemens CPU, touch panel and frequency converter (created by Gabler in 2020); Drive via SEW gear motor (1.1 / 6.6 kW); Speed infinitely variable from 0 to 29 rpm. The scope of delivery also includes feet that enable a spout height of 1,900 mm.

Horizontal batch mixer with a gross volume of 6,800 l. (= usable filling: 1,700 l. to 5,100 l. max.). Including drive unit with 110 kW and motor frame. Centrifugal unit equipped with Becker blades, end wall equipped with sampling device, emptying pneumatically via long floor flap.

Vacuum Vacuum Cleaner Manufacturer Nilfisk Type VHW 321 L Year of construction 2013

Here we offer for sale a brand new Reinhardt electrically heated chamber dryer in its original packaging. Reinhardt Chamber Dryer Vortex 2600 Technical description Vortex 2600 Temperature range: 50 - 250°C Temperature deviation: approx. ± 5K in the inertia state, idle and recirculation mode at 250°C Furnace control: PLC control, type "RCC", with touch panel 5.7" Volume approx.: 2,600 litres Interior dimensions: Width: 1,250 mm Height: 1,850 mm Depth: 1,150 mm External dimensions approx.: Case width: 2,000 mm Total width: 2,350 mm Case height: 2,170 mm Total height: 2,700 mm Total depth: 1,570 mm Track dimensions: Track width 990 mm Track width 60 mm Insulation thickness: Side walls, ceiling and doors are insulated with 150 mm insulation material, the floor with 50 mm insulation material. Total connected load: 23 kW of which for: Heating: 22 ...

used sand core shooting machine for foundries with transport belt discharge, so called core belters with shouting volume of 5 liters, mainly used in the fitting or faucet industry. used Hot-Box core belter see pictures hydraulik unit: 4.0 kW heating devices: 2x 13 kW core box dim. : 500x250x110 mm more information on request

Hello Here is the layout of the Lines module. Furthermore, a list of the individual machines of the Ecoprogetti plants, with compilation of the new purchase prices of the entire system: The plant is to be sold against the highest bid. , We are pleased about your interest in cooperation in the field of industrial plants. Offer: Production of photovoltaic modules, equipped with very high quality Ecoprogetti, Teamtechnik and 3D-Micromac machines. Year of construction. 2021 – 2022 Lines. approx. 400 modules per line per line. 7.5 hours (300 MB performance) Halls: Production/assembly area: approx. 180 x 50m / 9000m² Module/quantities per layer: 720 pieces to Max: 800 pieces, it depends on the size. Equipped: 4 pieces of Stringer i8 TT 2000 and 6 pieces of Stringer TT 2100 all year of construction 2021 - 2022 This plant has a completely new pric ...

Pressure leaf filter for filtration of vegetable oil - 8m² filter area - 720 litres - Pneumatically operated swing flap at the outlet - Including piping with valves - With control cabinet - Optionally with screw compressor

Screw press for cold pressing of oilseeds - Manufacturer: Reinartz - Type: AP 10/06 - Power: 7.5 kW - Processing capacity (rapeseed): 100 kg/h - Processing capacity (other oilseeds): 70 kg/h - Length: 1900 mm - Width: 600 mm - Height: 1100 mm - Weight: 900 kg

Checkweigher Manufacturer: Loma Type CW 3 Year of construction 2010 Weighing range 50g-6000g Belt length 300 mm Belt width 400 mm

Big Bag Emptying - With vibration dosing bowl - With pneumatic outlet flap - With full detector / swing leaf detector

Machine Type: Core Sand Mixer Manufacturer: Baumberg Type: AMF60 Year of Make: 2010 Condition: used / in working order Offer will only be sent if a complete imprint is provided Price 1.750 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference M-BAU-0425 DESCRIPTION We offer you a used core sand mixer from the manufacturer Baumberg. Weight 480kg Flow rate 1.44 m3/h Timer would have to be renewed. But it also works that way. Available now. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Metal detector Manufacturer LOMA IQ2 Type emc Year of manufacture 2001 Belt width 20 cm Height of the passage 12 cm Documents available in German With conveyor belt and ejector

Checkweigher Manufacturer: Garvens Automation GmbH Type SL 2 DM Maximum load max. 100 g Documents available

UV disinfection system Make WEDECO Type ME 450 Capacity 35 cbm/h Composed of: UV Reactor, Stainless Steel Housing Material 1.4301 Reactor chamber material: pure quartz Volume 25.0 l Flange connection DN 100, 1.4571, DIN 2576 Empty weight approx. 140 kg, dimensions: 380 mm width x 2215 mm high x 415 mm depth Water temperature 5 °C – 60 °C, operating pressure 10 bar, pressure loss approx. 0.01 bar Protection class IP 65 UV lamps Hg Low Pressure Spectrothermal Emitters Power 160 watts, quantity 10 pieces UV sensor Accuracy +- 10% Switchboard

Description: The mill is in overhauled condition. The machine housing has been completely overhauled. Rotor is equipped with new blow bars. Impact mechanisms and lateral wear plates are new. incl. three-phase motor 45kW, B3, voltage 400/690V, 50Hz, 1485/min. incl. hydraulic power unit, 3kW incl. V-belt pulleys for mill and motor Comprehensive spare parts package consisting of: - 3 pieces of rotor used (in good condition) - 1 piece rotor new - Various pallets with blow bars, wear pieces, impact mechanisms, etc. - Inlet hood

Specifications: Processes: washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50Hz+N+PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine at a height of 1.6 m: n/a Vibrations: none Payload, max.: 200 kg Washing tub: 900 l Rinsing tray: 900 l Oil separator: 200 l

: 80000 kglength: 12000 mmwidth: 3000 mmheight: 1100 mm: lenkbar : lenkbar size of tyres: 540 / 300 2-fach mmdimensions: 13,6 x 3,0 x 1,1 mHeavy duty trailer with- Double steering- small turning circle- very robust, therefore low maintenance- Reversible drawbar- 50mm impregnated wooden support. (Picture is with steel pad)- Standard paint changes. On request in their Ral color.Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockersWould you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30000 kglength: 9000 mmwidth: 2500 mmheight: 790 mm: lenkbar : lenkbar size of tyres: 425 x 260 / 2-fach weight of the machine ca.: 4,2 tdimensions of the machine ca.: 10,9 x 2,5 x 0,8 mmHeavy duty trailer with- Double turntable steering- small turning circle- Tilt-proof due to steering lock limitation- very robust, therefore low maintenance- Reversible drawbar, Length 1320mm- impregnated wooden support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40000 kglength: 8000 mmwidth: 3000 mmheight: 900 mm: lenkbar : lenkbar size of tyres: 540 / 300 2-fach mmdimensions: 9,9 x 3,0 x 0,9 mHeavy load trailer with- double steering- small turning circle- Tilt-proof due to steering angle limitation- very robust, thus low maintenance- Reversible drawbar- impregnated wood support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40000 kglength: 9000 mmwidth: 3000 mmheight: 850 mm: lenkbar : lenkbar size of tyres: 540 x 300 8-fach mmdimensions: 10,9 x 3,0 x 0,9 mHeavy load trailer with- double steering- small turning circle- Tilt-proof due to steering angle limitation- very robust, thus low maintenance- Reversible drawbar- impregnated wood support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30000 kglength: 6000 mmwidth: 2500 mmheight: 823 mm: lenkbar : lenkbar size of tyres: 425 x 260 / 2-fach mmweight of the machine ca.: 3,2 tdimensions of the machine ca.: 7,9 x 2,5 x 0,823 mmHeavy load trailer with- double steering- small turning circle- Tilt-proof due to steering angle limitation- very robust, thus low maintenance- Reversible drawbar, Length 1320mm- impregnated wood support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 20000 kglength: 8000 mmwidth: 2450 mmheight: 850 mm: lenkbar : lenkbar size of tyres: 540 x 300 weight of the machine ca.: 2,95 tdimensions of the machine ca.: 7,6 x 2,5 x 0,85 mmHeavy duty trailer with- Double turntable steering- small turning circle- Tilt-proof due to steering lock limitation- robust, low maintenance- with reversible drawbar, length 1320mm- 50mm impregnated wooden support.- Standard paint changes. On request in their Ral color.Would you like other loads and dimensions? Please contact us.Images are vehicles with special-drawbar heightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.