other machines and plants used for sale (14,190)

AL-KO POWER UNIT 250 P - Exhibition machine -Pre-separator integrated, automatic extinguishing system integrated---------- Technical data ----------Extraction nozzle Ã: 250 mm, nominal volume flow: 3,534 m³/h, max. volume flow: 4,900 m³/h, max. vacuum: 3,184 Pa, filter area: 22.4 m², chip collection volume: 2 x 250 litres, number of bags: 2 pieces, motor 400 V: 7.5 kW, dimensions (LxWxH): 2,351 x 1,058 x 2,361 mm, sound pressure level: 71 dB(A), weight: 758 kg, after: GS - HO - 07- new exhibition machine -

Shredder LINI LW 40 -used-hydraulic feed, PLC control---------- Technical data ----------hopper opening: 600 x 820 mm, tricher capacity: 0.5 m³, rotor diameter: 200/250 mm, rotor length: 600 mm, motor power: 18.5 kW, weight: 1050 kg, dimensions (LxWxH): 2,070 x 1,260 x 1,640 mm, sieve holes: 15 mm

Manufacturer: Pollution Control Products Co. / Wiwox Model No.: PTR10 Year of Make: 1998 Year of purchase (used): 2015 Purchase price (used): 27.000,- EUR General overhaul in 2019 for 11,750 EUR New documentation for 3,800 EUR, this is available and can be made available digitally Test reports from 2019 to 2025 are available Usable volume: 0.25 m³ (internal dimensions 610 mm length x 790 mm width x 620 mm height) The furnace has a max. load of 515 kg and a max. payload of 3 kg plastic Conversion to liquefied natural gas by manufacturer (at our request) at the end of 2022

Leather goods wrapping machine with various tools up to approx. A6

Machine for punching and sharpening belts at the same time

Machine for polishing and belt edges

Output: 25-49 cycles/min, film material: PA/PE composite film or polyethylene film, cushion length range: 40mm-160mm, film width range: 420mm/767mm, max. roll diameter: 280mm, machine dimensions X/Y/Z: approx. 1600mm/800mm/1300mm, weight: approx. 230kg. Documentation available. On-site inspection is possible.

Two Stäubli robots including controller and stand are available. 1) 2x Stäubli RX160L robots, year of manufacture: 2017, axes: 6, payload nominal/maximum: 14kg/28kg, reach: 2010mm, repeat accuracy: +/-0.05mm, max. speed: 12.3m/s, weight: approx. 250kg, operating hours: approx. 52000h. 2) 2x Stäubli CS8C-RX160 controllers, year of manufacture: 2017. 3) 2x robot stands for Stäubli RX160L. Documentation available. On-site inspection is possible.

A vacuum lifting beam including a small sanding unit and a motor is available. Year of construction: 1994, load capacity: 10000kg, dead weight: 3000kg. Engine: Hatz 3L40C and sanding station: Hommel. On-site inspection is possible.

For sale on behalf of a customer: Lithoz CeraFab 8500 with complete equipment for post-processing and a variety of spare parts:, - Cleaning Station Ultra 2019; S/N: C-019-109-803 1pcs., - Airbrush NEO for Iwata BCN Siphon Feed Dual Action 1 pcs., - Pressable glass Pressable glass during UHC/VAT assembly 2 pcs., - UCH top with 6 screws 2 pcs., - UHC bottom 2 pcs., - Cera VAT F 1 pcs., - Used Cera VAT F and S Better ones may still be used 14 pcs., - LithaFoil CF8500 Adhesion foil 120x70mm 09.14.000064 71 pcs., - Printing platform 1 pcs., - Nabertherm Furnace TR60 2019; S/N: 371133 1pcs., - Nabertherm Furnace LHCT 08/16 2019; S/N: 374533 1pcs., - Nabertherm Furnace LHCT 04/17 2019; S/N: 367248 1pcs., - Fridge Arctico. For slurry storage 1 piece., - Small Z tube Tube for slurry cartidge 5 pcs., - Big Z tube Tube for slurry cartidge 13 pcs., - Printer key 1 pcs., - Cleaning s ...

The Zprinter 850 is the most productive full-color 3D printer with the largest build volume and highest resolution. Print multiple models in a single run or large concept models at any stage of design and development to quickly and cost-effectively perform design iterations, provide your customers with demonstration models, and avoid costly changes in later project phases. Photorealistic Colors The Zprinter 850 full-color 3D printer has five print heads for realistic printing of color models of your design. It enables optimal and consistent color reproduction with gradients using cyan, magenta, yellow, and black binders applied to a white powder. You can place your textures on the model and easily print them on the 3D model. High Throughput, Installation space (x,y,z): 508 x 381 x 229 mm, printing technology: ColorJetPrinting (CJP), Layer thickness: Standard 0.9 - 1.0mm, adjustment possi ...

Lifting crane with trolley lifting capacity 0.25t

4 OTIS elevators for sale – very well maintained, fully functional! We are selling 4 elevator systems from OTIS, built in 2011. The facilities are built over 8 floors, very well maintained and fully functional. The removal is carried out by the buyer. Details: • Manufacturer: OTIS • Year of manufacture: 2001 • Facilities over 8 floors • Very neat condition • Dismantling and collection on your own • Price per unit: 5.000 € Viewing possible by arrangement. Ideal for hotels, office buildings, apartment buildings or existing projects.

Hydraulic power unit with tank and internal Pump. • 15 kW electric motor. •Switchboard Control box and cable for electrical Connection. • Heat taischer integrated. •Oil filter with electrical monitoring. • Oil temperature monitoring. • Float switch (oil level) with electric Surveillance. • Rexroth Hydronorma Relief valve. •Window Oil level. • Oil connection cables included.

The metal separator was only in use for a short time and makes a new impression Operating instructions available Availability: immediately

For sale is a good used Keyence digital measurement projector of the type IM-6025. The measuring device is sold including the IM-7500 control unit. Prior sale and errors excepted.

Modular high-throughput pressure device with environmental control (single cell only) with 4 liquid channels scalable to 8 liquid channels for dispensing reagents Ability to dispense from 10 pl to 800 pl in a single drop, depending on the piezo dispensing capillary (consumable) used. The instrument provides consistent and highly reproducible reagent delivery with a mechanical precision of gantry motion of less than 3 μm and a spot positioning accuracy of typically less than 6 μm.

Various devices and machines are available. 1) Small vibrating mill William Boulton. 2) Compressor motor KDT 2.80, power: 2.3kW, quantity: 3. 3) Roof ventilator, quantity: 2. 4) Oven. 5) Pump (DIA) SZ80-1KR 225. 6) Robot Fanuc M-410i, year of manufacture: 1997. On-site inspection is possible.

Vibratory feeder Manufacturer : Fimotec-Fischer Type: VZ-40-SZ Technical specifications : composed of: Vibratory feeder with sheet steel cylinder vibrating shells Bunker feeding system Control mounted on a work table very good condition

: 15000 kgheight: 790 - 1350 mmwidth: 2000 mm: ja : 120 x 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring range X/Y/Z: 3000mm/1800mm/6000mm, measuring accuracy: ±(2.5 + L/300)µm. On-site inspection is possible.

A Lisec horizontal conveyor field is available. Pressure: 6bar, max. conveyor weight distribution: 50kg/m², weight: approx. 1450kg.

A rotating wall for the glass industry is available. Weight: approx. 1300kg.

A Hegla SF 2518 vertical conveyor for the glass industry is available, weight: approx. 2700 kg.

A Hermann Rothenburg stirring and mixing vessel is available. Operating pressure vessel/jacket: 2bar/0.5bar, volume vessel/jacket: 1000l/180l, max. temperature vessel/jacket: 180°C/180°C. On-site inspection is possible.

: 2000 kgheight: 1080 mmwidth: 1500 mm: nein : 1500 x 100 mm: 1,5 x 0,53 x 0,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring range X/Y/Z: 440mm/700mm/410mm, measuring uncertainty X/Y/Z: 2.5+3.9L/1000µm, probing deviation (MPEp): 3µm. Acceleration: 1730mm/s², traversing speed: 350mm/s, max. table load: 200kg, working temperature range: 19°C-21°C, operating temperature range: 13°C-35°C, air consumption: 21l/min, weight: approx. 400kg, control: Hexagon PC-DMIS. Documentation available. The coordinate measuring machine must be recalibrated.

A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by  ...

Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available.