meat and fish processing machines used for sale (1,903)

Used-refurbished equipment 6 months warranty refurbishment time approx. 3 weeks 152 needles 600mm tape width max. capacity 6000kg/h Technical data: Power: 8 kW Dimensions (HxWxD): 1880x965x2100 mm Weight: approx. 580 kg Electrical connection: 400V, 50Hz, 3phase

Splitting saw for small/medium sized plants. For cutting up to 100 pigs or 20 cattle per week. Saw blade gross serrated, stainless steel HUGZ600SP. SK spiral wire. Round handle R (D-type). Grease gun and 1 kg of grease. For direct connection to starter/transformer. Technical data: - Weight: 20 kg - Blade length: 600 mm - Protection: Protection: IP 65 - Power: 1300 Watt (50Hz/VA)

Stainless steel standing hand washers

- completely stainless design, for dry goods filling, - driven by state-of-the-art servo motor, - electronic control , - the vacuum system is equipped with a humidity sensor, - the filling speed is infinitely variable, - can be operated by knee switch - 90 litre hopper, foldable - with removable feed and cleaning auger, - the conveyor is of paddle-wheel design, stainless steel - possibility of connection to a clipping machine for the associated equipment - equipped with standard accessories. - Loading capacity: max. 3.000 kg/hour - integrated computer for control and regulation, - 99 program positions foil stowage, full water protection, - dosing from 1 to 99.999 grams, - automatic fault indication logic, digital display - dimensions: 1156 x 963 x 1775 mm Total power: 2,6 kW Capacity: 0,55kW, 25m3/hour Voltage, freq ...

Performance data: - Filling capacity: max. 3.000 kg/hour - built-in computer for control and regulation, - 99 program positions, full water protection, - dosing from 1 to 99.999 grams, - automatic fault indication logic, digital display Technical data: Power: 2,6 kW Capacity: 0,55kW, 25m3/hour Voltage, frequency: 400V, 50Hz, 3 phase Max. filling pressure: 35 bar Reservoir head, complete - Maximum output 400 ppm - 1-10 turns infinitely variable - synchronous drive for the bowel support - with standard accessories and 3 filling tubes.

These systems are mainly used for processing sausage meat using stuffing machines. But other high-viscosity products from the food industry, such as marzipan, can also be tested with these devices for very fine metallic residues. The high-strength product tubes can withstand pressures of up to 55 bar. RD80/HP screw fittings are used for connection. The whole unit is height adjustable and movable, so it can be connected to all standard chargers. Optionally, the units are available with a connecting gear for direct connection to the calibrator. Suitable ejector valves are available for emptying the metal! Special features Compatible with all standard filling devices Optional ejector and/or connecting gear Protection class IP69K for all components All components in hygienic design Height adjustable via maintenance-free spindle drive M-Pulse2 controller 4 quadra ...

Robust construction made of stainless steel and high quality metal alloys. Dual chamber design for maximum efficiency. Cutting welds for accurate and reliable welds. Easy maintenance thanks to removable sealing jaws and service program. Versatile application possibilities for different packaging requirements.

High-performance mixer-grinder, ideal for use in supermarkets and the meat industry, combining good mixing and grinding. - Supplied with two motors that can operate independently of each other, adapting to the needs of the product. - Built-in mixer-grinder in 18/10 stainless steel. - Gear driven gearbox. - Three-phase motor for grinding:-PM 32-98: 5,5 HP (4 KW) -PM 42-130: 13 HP (9,2 KW). - Three-phase motor for mixing:- PM 32-98: 1 HP (0,75 KW) - PM 42-130: 1,5 HP (1,1 KW) - Cutting head made entirely of stainless steel. Available in ENTERPRISE one cut (1) in PM 32 and PM 42 models, UNGER two cuts (2) in PM 98 and PM 130 models and UNGER three cuts (3) in PM 130 model. - Automatic feeding:- PM 32-98: 90 litre bowl - PM 42-130: 130 litre bowl - Automatic reversible mixing blades. - With optional motherboard sensor. - Optional foot switch. - Optional shock ...

Technology that penetrates under the skin Increase yields with patented deep peeling Safe conveyor belt filleting High quality skinning - no post-processing Gentle processing of delicate fillets

Cutting width: 430 mm Cutting speed: 24 m/min Application: for automatic boning of belly, back fat, trimmed leather, cuts, etc. for "manual" open-top boning of round cuts such as ham or shoulder.

Economical circular knife cutting machine High capacity (e.g. 7.5 tonnes of pork steaks per hour) 300mm

The Poultry Skinning Machine MAJA ESB 4434/1 GH is suitable for the safe automatic skinning of fresh poultry parts by infeed conveyor belt.

Two chamber vacuum packaging machine Komet SD 320, all stainless steel, high performance vacuum pump, electronic control, infeed plates for height adjustment.

Technical data Specifications are subject to change without notice. Dimensions are subject to change. Dispensing width (max.) 130 mm Dispensing height (max.) 75 mm Dispensing length (max.) ~60-280 mm Motor power 0,25 kW Voltage (3-phase) 400/50 V/Hz External dimensions (W x D x H) 616 x 1407 x 1185-1385 m

The machine is in good condition. Technical data: 130mm hole plate diameter 1 speed working pulley 1 speed feed screw 130 litre tank capacity Width: 1250 mm Depth: 1000 mm Height: 1550 mm Installed power: 11,0 kW, 23 A Voltage: 380 V, 50 Hz

Restored machine Variable frequency starting for lower current surge 30kW two-axis motor power 2 selectable two-axis speeds Stepless plate speed adjustment NEW two-axis bearings and seals

Engine power of the bowl, kW: 1,5 Motor power of knives, kW: 37 Bowl volume, l: 125 Bowl rotation speed, rpm: 10/ 20 Two-axis speed in cutting mode, rpm: 2000/4000 Two-axis speed in forward and reverse mixing mode, rpm: 80/160 rpm Dimensions (WxDxH) max, mm: 2140 x 1375 x 1590 Weight, kg: 2200

The RKS equipment calibrates the products that are swamped by the humidifier head between the conveyor belts. The equipment can be adjusted and controlled via the filling machine. It provides easy changeover between natural and artificial belts. When the pick-up unit is connected after calibration, the goods are transferred to the pick-up hooks.

Integrated electronic motor brake (stops in less than 3 seconds) -One-hand adjustable cutting depth control -R round handle (D-type) -SK spiral cable Physical characteristics Weight 6,3 kg Length 520 mm Width 96 mm Height 194 mm Diameter 180 mm Cutting depth 15-65 mm Cutting range 15-65 mm Drill hole 30 mm Speed 810 m/min Speed 1432 /min Electronic input Phases 1 Voltage 230 V Protection 24 IP Electronic output Power 1050 Watt (50-60Hz)/VA power_power_hp_5060hz 1.4 HP (50Hz)/VA

One-hand adjustable depth of cut control Powerful 800W pneumatic motor "Made in Germany" Stainless steel saw blade cover and depth control Balanced load protects the operator's wrist Robust and low-wear gearbox Adjustable handle for better ergonomics Physical characteristics Weight 3,1 kg Diameter 160 mm Cutting depth 15-51 mm Cutting range 15-51 mm Speed 1225 /min Input Pneumatic Consumption 950 l/min Air pressure 6 bar Inlet air pressure 90 psi Output Pneumatic Power 800 watts 0,9 HP

Used-refurbished machine 350 Litre tank capacity Belt drive with toothed belt TC 20/40 programmable control Vacuum pump

Shrink bags are mainly used in the food industry. Food packaged in a shrink bag is placed in a container filled with hot water for a few seconds; during the immersion process, the bag shrinks around the product, keeping it fresh for longer and affecting its appearance. The immersion tank can be operated manually or automatically. On the Inauen VC999 Tank 6241 Shrink Tank, programs can be easily set via a touch screen. The machine is made entirely of stainless steel. Capacity: 12 cycles/min. Programmable cycle time: 5-99 s.

Standard Features 2 roller system for thorough depilation Head scratcher also for the difficult to access head area Mobile on 4 castors Newly developed, reinforced transmission Special rubber racket (also on the back wall) Electric heating in an oil bath Integrated control and operating unit in the machine housing Swing-out rollers for cleaning the machine

SKINNER- DERINDER, GRASSELLI TYPE: N520 Technical description: Material: Stainless steel Working widht: 470 mm Power M5448214 supply: 380/440 V - M5448214 50/60Hz Dimensions: 2300 x 850 x 1720 mm seller offer No. resale 1791

Pig dehairing machine Baumann Dimensions: 240x100x145cm

Product features Electrical insurance: 35 A Electric power: 15 + 2,2 + 0,1 kW Capacity: 300 crates/hour Size: 2700 x 800 x 1850 mm

Product description: - Robust, all stainless steel construction - Low rolling resistance wheels - Low-friction, low-rolling resistance Low-friction, low-rolling resistance 6 levels, 16 smoking bars per level - Standard dimensions (H x W x D): 1000x1000x1900 mm

Technical data Capacity: 1050 kg/hour Mixing volume: 90 litres Cutting device: B98, Unger 5-piece (3 discs, 2 knives) Power: 4 kW Dimensions: Dimensions between pictures! Weight: 400 kg

Product description: - new machine - 3x42 Volt - 2300W power - 460mm cutting length - 3m straightener (also for cattle)

It is a high-capacity semi-automatic machine capable of producing up to 320 slices per minute and dicing up to 3,000 kg of meat or bacon per hour, with a temperature range of minus 5°C to + 80°C. It can be used for a wide range of applications, from slicing bone-in meat with a special knife to dicing a variety of boneless materials. The slicing quality is excellent, without splinters. Multiplex system grid design, easy to clean and replace. The thickness of the slicing function is adjustable from 0.5 to 32 mm. The device ensures an optimal cutting blade. The working area of the unit allows the preparation of 3 plastic crates of raw material (approx. 150 kg). This worktable ensures comfortable working conditions. The machine is equipped with a semi-automatic lifting device. This means that at the touch of a button, the next plastic crate is lifted to the height of the wor ...