Cutters and vacuum cutters used for sale (93)

Kilia TK20 Table Cutter 20 litre solid stainless steel bowl 2 courses 6 mm cutter head Spare blade set and fork locks included 400V Stainless steel housing smooth and smooth running, video of test run available comes from a gastronomic business in which meat loaf was made with it

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

Cutter Seydelmann K60U, 60-litre bowl, Machine completely in stainless steel, 2 speeds, mixing passes, with 6mm cutter head, spare knife, cutter head wrench, Connection 400V, 22kW, dimensions LxWxH approx. 125x100x128cm, weight approx. 790kg, good used condition, fully functional

This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm

Cutter Capacity: 25 liters Voltage: 380V / 50Hz / 3 phase Power: 1.5kW Speed: 1000-2000 rotating/min Dimensions: 85x67x70cm Packing size: 93x78x71cm With a temperature probe and the net

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), 3x manual tigh ...

The pictured cutter is sold by MADO of the type Garant MSK760 H II with a volume of 35 litres. The cutter is made entirely of stainless steel, it has a 6 mm cutter head with an additional spare blade set and comes with an operating manual. The cutter has the following technical data: Bowl volume: 35 litres Number of knives: 6 Speed: 1750-3500 rpm Bowl speed: 12/24 rpm Knife shaft power: 9/11kW Voltage: 400V Fuse: 32A (slow-blow) Dimensions: 1240x890x1130H (1240x1260x1740H with lid open) Footprint: 1040x550mm Weight: 430kg Keys for the cutter head and documentation are part of the machine The machine runs neatly and smoothly, video of the test run available Only the noise protection cover has a crack, but this was professionally glued by the previous owner.

Spare parts for different Stephan UMM/SK - TC/SK Universal machines. The lot of spare parts is existing out of:, - 4x Springs., - Several steam injection nozzles and components., - Temperature indicator., - Knife nut., - Several scraper blades., - Gummies., - 9x Used Stephan 80 knifes., - 2 New Stephan 80 knifes., - 2x Used Stephan 25 or 40 knifes., - 4x Manual clamps for fixing the lid., - Vacuum chamber., - Filler bushings Stephan TC/SK 600., - Part of a pneumatic outfeed valve., - 4x Sieve plates., Type of Machine: Universal machine

Height 1550 mm Width 2950 mm Length 1750 mm Weight 4100 kg Capacity 200 l Electrical Supply: 400V 50Hz 3N Total power 78 kW Main Material Stainless Steel, Acid Resistant Cutter type Vacuum bowl cutter Construction of the cutter bowl Stainless steel, acid-resistant Number of knives on the head 8 pcs. Vacuum cutter. Additional functions for heating or cooling the bowl

BOWL CUTTER WITH EMPTIER MEISSNER, TYPE: COM-120 Technical description: Serial number: 718810 Material: Stainless steel Aisi-304 Power supply: 380-440V/50-60 Hz Bowl capacity: 120 lt Dimensions: 2100 x 1450 x 1570 mm

Cutter Mado MSM 764 SL, 50 litre bowl, completely in stainless steel, built in 2014, Stepless knife shaft up to 5000 rpm, mixing cycles, 2 bowl speeds, 3 cutter head, connection 400 V, 32 kW, Dimensions LxWxH approx. 125x100x115cm, weight approx. 768kg, very good used condition, fully functional

BOWL CUTTER, TVALL TYPE: CRI-50AC Technical description: Serial number: 9.089.403 Speeds: 2 Bowl capacity: 50 Lt Power supply: 380-440V/50-60 Hz Dimensions: 1300 x 1000 x 1350 mm

ALCO Tiler ASP 400 HDI fully refurbished

130 litre ALPINA SWOPPER SW 130-S checked function, loader,unloader

Seydelmann K 60 AC, very good condition

SEYDELMANN KontiKutter KK 140 AC6, in very good condition

KG Wetter SM 65 T2M, completely overhauled

KG Wetter SM 45 T2M, completely overhauled

Cutter Rex Düker Hydro 100, completely in stainless steel, with ejector, bowl capacity 100 litres, Stepless knife speed, mixing gears, Connection 400V, main motor 35kW, weight approx. 1750kg, good used condition, fully functional

The Seydelmann K506 AC8 500 L Cutter is a must-have piece of equipment for companies looking for advanced performance in food processing. Indeed, its large capacity tank facilitates the processing of large volumes, which improves the production rate. In addition, its robust stainless steel design ensures outstanding longevity, even under intensive conditions. In addition, its high-performance blades ensure consistent and precise chopping, preserving the texture and quality of the ingredients. This makes this cutter perfectly suited to the requirements of different applications, ranging from meats to vegetables to delicate preparations. In addition, its user-friendly interface offers significant ease of use, reducing the training time required for operators and contributing to better productivity. In addition, the ease of cleaning and accessibility of its main components minimize do ...

Fatosa 120L Cutter The Fatosa 120L Cutter is a great asset for professionals looking for a reliable and efficient solution. Indeed, its spacious bowl allows a homogeneous mixture of various materials, whether meat, vegetables or even more delicate preparations. In addition, its fast-turning knife system preserves the texture and freshness of the ingredients, which fully enhances the quality of your products. Secondly, the stainless steel design ensures optimal hygiene, while facilitating cleaning operations. This saves you time and meets the most demanding health standards. In addition, the intuitive control interface allows precise adjustment of the cutting speeds. In this way, you can adapt the fineness of the chopping according to the characteristics of each recipe without losing efficiency. In addition, the ergonomic design reduces the strain on operators, who can quickly access  ...

Type: K324AC8VA Serial number: S8-00324-0256-18 Year of construction: 2018 Bowl: 325 litre Knife speed: 6 steplessly programmable speeds Bowl: 2 speeds Mixing: 2 reverse mixing speeds Controls: Auto-Command 1500K Vacuum pump: Elmo Rietschle L-BV5, 200 m3/h Compressed air: 6 - 10 Bar Water: 4 - 6 Bar Power: 3 x 400V, 50Hz, 157kW Dimensions: 2600 x 3650 x 1700 mm Weight: 4300 kg Including unloader and BW200 loading device With water counter

Cutter Manufacturer: Kramer Grebe Wetter Bowl made out of stainless steel Dimensions: 290x244x210cm Control voltage: 230V Operating voltage: 400V / 50Hz Power: 74kW

Frozen block cutter Manufacturer: Magurit Stainless steel Cutting dimensions: maximum cutting size 750 x 480 x 240 mm Motor: 4 kW hydraulic Power: 400 V / 50 Hz Dimensions: 1700 x 1100 x 1850 mm 3 knives

Cutter Manufacturer: Krämer Grebe Wetter Stainless steel Capacity: 65 liters 2 knife speeds 6 knives Power: 25kW

Cutter Manufacturer: Baader Stainless steel Capacity: 60 liters 6 knives

Cutter Manufacturer: Kilia Stainless steel Capacity of the bowl: 50 liters 6 knives

ALPINA TIPPER TIE SW 330 CUTTER AS NEW

Vacuum cutter Alpina Swopper Sw V 330 S

Annpona Cutter PB 125-990, with Black Bowl, in Function

Laska Bowl Cutter KU 80 litres, with black bowl, in function

300 lit, good condition

WOLF Seydelmann AE 130 3.

WOLF Seydelmann AE 130 3.

Additional knives will come with machine.

Type: KUX750VAC Serial number: 12110 Year of construction: 2007 Bowl capacity: 750 litres Knife speed: variable, 60 - 3300 RPM Mixing speed: 150 RPM Bowl speed: 4, 7, 10, 14 RPM Power: 3 x 380V, 50Hz, 273kW Compressed air: 6 - 10 Bar Water: 2 - 6 Bar Dimensions: 4330 x 3700 x 3050 mm (open lid) Weight: 7900 kg With double lifter for 200L tote bins and unloader

Used-refurbished cutter machine 65L plate capacity Simple controls Thermometer Plate speed counter Stirring speed Speed: approx.4000 rpm Power: 20 kW Power consumption: 42 A (400V,50Hz) Wind. x Deep. x Core.: 1400x1100x1200 mm Weight: approx.1000 kg

Restored machine Variable frequency starting for lower current surge 30kW two-axis motor power 2 selectable two-axis speeds Stepless plate speed adjustment NEW two-axis bearings and seals

Engine power of the bowl, kW: 1,5 Motor power of knives, kW: 37 Bowl volume, l: 125 Bowl rotation speed, rpm: 10/ 20 Two-axis speed in cutting mode, rpm: 2000/4000 Two-axis speed in forward and reverse mixing mode, rpm: 80/160 rpm Dimensions (WxDxH) max, mm: 2140 x 1375 x 1590 Weight, kg: 2200

Laska mobile micro cutter -Model: FZ 225 -Power: 132 kW -Dimensions: 2220 x 1170 x 1280 mm -Set diameter: 225 mm -Hopper capacity: 200 L -Weight: 1500 kg -Power supply: 400 V 50 Hz 3N -Cutting set and additional parts included -Stock quantity: 1 -Condition: used

120 liter K+G WETTER Cutter Mixer / Cutter Type: CUTMIX 120 STL / CM 120 Model: 420 Machine number: 420 / 1389 Year of Make: 2020 only 148 operating hours Infinitely programmable knife speeds Infinitely programmable mixing speeds (forward + backward) Infinitely programmable dish speeds electric knife lid lift Removable dam wall Intervention protection and flap Hydraulic loading for 200 litre cutter wagons hydraulic product ejector Touch control Preparation for K+G WETTER Cut-Control 6 mm cutter head Rated power: 43 kW Fuse: 100 amps used, very good condition - very little used

Manufacturer: Laska Type: KU 200 V.DC Model : 0214 Year of construction : 2012 Power: 97 kW Weight: 4300 kg Length x width x height: 3900 x 2300 x 1660 mm Connection: 400V 50 Hz Bowl volume: 200 L - Cutter Vacuum 200 L - With feeder and ejector Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Totally overhauled Marel IPM X300 Portion Cutter Marel X300 is specifically designed for cutting fish fillets and meat into portions of pre-set weight or length. It is equipped with a laser scanner to accurately measure the product before cutting. It is the perfect solution for achieving high-quality portioning of salmon into fixed-weight and fixed-length portions. The machine features a perforated belt with a width of 280 mm. The belt speed is adjustable, reaching up to 300 mm per second. Accuracy: 96-98% Capacity: Can portion up to 15 fillets per minute. Dimensions (LxWxH): 3300 x 1000 x 1650 mm.

Height 1200 mm Width 1250 mm Length 1750 mm Weight 600 kg Capacity 3500 kg/h Power supply: 400V 50Hz 3N Total power 52 kW Cutter Type Through Cutter Cutter design Stainless steel, acid-resistant Knife shaft speed 2970 rpm

Height 1700 mm Width 1600 mm Length 2300 mm Capacity 300 l Power supply: 400V 50Hz 3N Total power 106 kW Main Material Stainless steel, acid-resistant Cutter Type Bowl Cutter Cutter design Stainless steel, acid-resistant Number of knives on the head 6 pcs.

Cutter ALPINA 500 VACUUM After capital renovation. 3-month warranty on parts. All bearings and sealings in this machine are new. General overhaul of the vacuum pump, actuators and hydraulic pump. New electrical cables. New hydraulic cables. New control panel and controls. New set of knives. Delivery time: 4 weeks - now during renovation. 15% prepayment.

Cutter Manufacturer: Talsa Model: K30ns Strong, all stainless steel construction, solid bowl and lid Very high cutting speed, fully variable from 500 up to 3500 rpm Smooth start of knives due to electronic drives, overload protection Electric device to prevent condensations inside the machine frame Transparent noise protection cover Volume: 30 liters Bowl Capacity: ± 5-22 kg Electric power: 5.6kW Voltage: 380V 50Hz Weight: ± 330 kg

120 ltr. stepless with feeder and ejector

Height 2800 mm Width 1600 mm Length 2000 mm Power supply: 400V 50Hz 3N Total power 111 kW Main Material Stainless steel, acid-resistant Cutter Type Through Cutter Cutter design Stainless steel, acid-resistant Cutter bowl made Stainless steel, acid-resistant

This machine is a mixer, cutter and emulsifier enclosed in one housing The benefits are as follows - space-saving thanks to compact design, - grinding the product in the cutting bowl under the influence of vacuum with simultaneous stirring and cooking - stable end product with repeatable quality thanks to fully automatic process control, - possibility of direct and indirect heating and cooling, - the possibility of producing fine emulsions and paste-like masses, as well as products with fine and coarse fractions. Capacity: 900 l Electrical voltage: 400V 50Hz 3N Installed power: 2x106 kW + 132 kW Main Material: Stainless Steel Agitator tank: 2000 l