machines and plants for process engineering used for sale (7,697)

Kyffhäuser Pumps Artern GmbH Type: KN 33/18 Y.O.M.: 2009 Capacity: 1 m3/h at 6 m height Power: 1.1 kW Pump as good as new, unused Dimensions LWH: 500 x 300 x 300 mm Weight: about 20 kg

Excenter screw pump Make: Netzsch Type: NE 20A Speed-controlled gearbox (manufacturer: Stöber) Speed: 64-320 rpm Power: 0.55 kW at 1380 rpm Dimensions LWH: 1200 x 300 x 350 mm Weight: approx. 80 kg

Mixing vessel Total volume: 100 l speed-controlled agitator Speed 335-1920 rpm Engine 3000 rpm Lid outlet on the ground very high quality Dimensions LWH: 500 x 500 x 1800 mm Weight: approx. 150 kg

Sieve Drum Waste Waste Product Drum Sieve Machine Screening System 2.24 m Diameter 7.5 Kw Stainless Steel Enclosure used Manufacturer: Lohse Total length: approx. 6337 mm Drum diameter: 2240 mm Height: approx. 4807 mm Plant width: approx. 3400 mm Sorting screen plate 1st zone: 8x60 mm Sorting screen plate 2nd zone: 6x40 mm Operating weight (filled): approx. 11000 kg Empty weight complete: approx. 9500 kg Drum housing is made of stainless steel, screen basket iron Motor data - drum drive Three-phase motor type R93DV 132M4 Power: 7.5 kW Engine speed: 1430 rpm Drive speed: 25 rpm Speed drum: 10 rpm Connection: 230/400 V Rated current: 16 A Frequency: 50 Hz Protection: IP54 Design: B3 The sieve drum has already been dismantled and cleaned. Item location 01587 Riesa, visit possible.

Mixing container 150 l with opening lid various lid openings with valve Exhaust fitting with milk tube valve Propeller agitator Speed: 1380/224 Power: 0.55 kW Dimensions LWH: 800 x 800 x 1800 mm Weight: approx. 150 kg

Mixing tank with agitator Content: approx. 80 l LWH: 500 x 450 x 1100 mm Weight: approx. 30 kg

Mixing container 150 l Filling lid (diameter 200 mm) Propeller mixer 2.2 kW stable design Outlet with valve (milk pipe) Level detector high-quality workmanship (stainless steel V4A) Dimensions LWH: 700 x 700 x 1850 mm Weight: approx. 170 kg

Vacuum stainless steel planetary mixer mixer mixer mixer mixer used, as good as new condition State. As good as new Gross volume: 140 litres Attachment (batch) size: 35 to 100 litres max. 200 kg Max pressure: Vacuum 10mbar absolute up to 1200mbar absolute Process pressure range up to max 200 mbar Max operating temperature: 80°C Mixing tool: 7.5 kW Stirring head speed: 3-40 rpm Mixing tool speed: 10-120 rpm Total connection power: 25 kW Operating voltage: 3x 400 V / 50 Hz Control voltage: 230 V / 50 Hz or 24 V DC Siemens PLC Visualisation Filling nozzle slated with pneumatically spun rotary flaps Filling snail Frequez controlled motors Level sensors hydraulic excavation with Siemens Symatic Multi Panel Touch / Siemens Simatic controller / Siemens frequency inverter with 2x mobile cylindrical exchangeable container (140 L ) with cooling jacket (20 L) made of stain ...

Vacuum deaerator Manufacturer: Fryma Type: VE 3 Machine no.: F 703419 very good condition Netzsch pump NL50A Vacuum pump Dimensions LWH: 2800 x 1250 x 2250 mm Weight: approx. 1000 kg

Make: Fryma Line ML 250 / MZ 250 for soy milling, production of soy milk Perforated disc mill: 45 kW Colloid mill: 60 kW Capacity: approx. 7000 l/h (soy milk) Dimensions LWH: 1700 x 1500 x 1550 mm Weight: approx. 1100 kg

Automatic powder dispersing system in EEx protection Make: Pierre Guerin Type: Blending System SM 20 Y.O.M.: 1994 Power: 2.5 kW Plant number: 4461 - 4450 Pump supply and output electro-pneumatic valves as good as new on mobile tub bowl Dimensions LWH: 1500 x 1100 x 1150 mm Weight: approx. 700 kg

Vacuum processing plant Manufacturer: Fryma Type: Delmix MZM VK-7 Y.O.M.: 1994 Machine No.: M16397 Pressure inside: -1 bar Batch: 7 l for food, cosmetics, pharmaceuticals in sound condition Mobile Dimensions LWH: 900 x 800 x 1350 mm Weight: approx. 120 kg

Batch container 1.500L, heatable, incl. anchor agitator

Used burn-in tunnel kiln for drying or burning products made of glass, ceramics or similar things. A total of up to 8 ovens are for sale. The belt furnaces were installed in a system for the glass foam (foam shading) production and were in use until the demo days of the complete plant. We also continue to have components of the plant, such as mills, mixers, silos, and conveyor technology. Manufacturer: MUT GmbH Jena Type: BDO 100-150 Built: 2003 Max Temp. 1100°C Connection value: 315 kW Control SIEMENS S7 -300 Length approx. 14 m Internal dimensions: approx. 300 x 1000 mm The ovens can also be used for tempering, glazing, sintering, blowing, drying and cooling of powdery or chunky goods.

The belt dryer / continuous dryer is used for the continuous drying of coatings on smooth surfaces such as glass. Manufacturer TESOMA GmbH Type LYNX Version 16-E-HHH-X Built in 2008 Bandwidth 1600 mm Flow height 400 mm Inlet length 500 mm 3 hot air segments per 2000 mm Outlet length 500 mm drying temperature 100 °C solvent throughput 7.00 kg/h at minimum exhaust air volume flow 1500 m3/h Tape speed 0.5 - 5 m/min Connected power 89 kW Heating capacity 79 kW total motor power 10 kW (fan and drive) Total dimensions Width: approx. 2400 mm Length: approx. 8800 mm Height: approx. 1800 mm For a visit, please make an appointment.

Stationary drying plant for cereals, grass, leaves, potatoes, sugar beet and similar products. Dimensions of the drum Drum length approx. 10 m Drum outside approx. 2.50 m Total weight drum approx. 21520 kg The facility is still in place and can be visited on site by appointment. (Saxony) In addition, but not included in the price, the following components can be offered: Product feed (conveyor belt) Suction and dust removal Cyclone separators The drum was lined in 2010 with new sheets (high-temperature resistant stainless steel). After that, the plant was only operated for one season. Of course, disassembly, loading and transport costs are not included in the purchase price.

Stainless steel silo container BSIF 550 Ltr. Content: 550 Ltr. Operating pressure: pressureless Year built: unknown Herst.: Shepherd Material: stainless steel 1.4301 container, frame iron painted Design: Rectangular container, stackable, passable with all common forklift trucks such as forklifts and lift trucks, dome lid 400 mm, drain disc valve DN 150 in stainless steel, very well maintained condition, vent cap in the upper lid, stainless steel pipe DN 80 in funnel, funnel inclination 45° last use: granules Height: approx. 1,480 mm Width/depth: approx. 1,200 mm / approx. 800 mm

Stainless steel IBC container, bulk container, capacity 750 liters Content: 750 Ltr. Operating pressure: pressureless Year built: unbek. Herst.: unbek. Material: Stainless steel 1.4301 Design: rectangular container, stackable, passable with all common forklift trucks such as forklifts and lift trucks, Dome lid 400 mm with bayonic closure in stainless steel, drain disc valve DN 250 (250 mm) in Edelstah,l with hand lever, 1" threaded connection in the upper floor last use: food Height: approx. 1,450 mm Width/depth: approx. 1,180 mm / approx. 980 mm

Centrifuge MULTIFUGE 3-SR Manufacturer: Heraeus Y/O:200140080191 LWH: 740 x 700 x 360 mm

Centrifuge Megafuge 1.0 Manufacturer: Heraeus Sepatech GmbH Y.O.M.: 1992 Factory no.: 193398 LWH: 540 x 460 x 380 mm

Centrifuge ROTINA 46 Manufacturer: Hettich Y.O.M.: 1998 Type: 4605 Factory number: 0001489 Speed: 11000 rpm

Agitator 150 litres with gearbox Rexroth 0.18 KW, i = 25 and propeller stirrer 150 mm Container: Single-walled stainless steel container 150 litres with drain tap. Rollable aluminium frame with aluminium profiles 45 45 mm. 4 steering wheels, 2 of them with brake. Geared motor: Rexroth, 3 x 230/400 volts, 0.18 kW, i = 25, n2=53 rpm. With motor protection plug. Shaft: precision stainless steel shaft D10, length 850 mm, diameter 10 mm, Material stainless steel Coupling: 2 clamping sets 17 to 10 mm, material stainless steel Stirrer: three-winged propeller stirrer, diameter 150 mm, material stainless steel 1.4581

Swash-up machine: 2-deck machine: 3.6 m2 / deck product-contacted parts in stainless steel 1.4301 ( AISI ) 2 x Ball knock cleaning Safety clamping screws Lifting device incl. 2 x sied, mesh size as desired: from 0.1 - 5 mm Height of the machine without frame: 1620 kg Weight: 1820 kg. --> Machine completely grounded.

High-performance kneader Volume: 2.5 ltr. Material : product-contacted areas of stainless steel;

Mixing vessel Company: Bäuchle & Sohn N°: 2193/1/2 Built: 1987 Double jacket pressure: 3 bar (insulated) Indoor and outdoor temperature: 150°C Content: max. 400 l min. 50 l Wiper agitator, speed-controlled Jet-flow agitator with 2 stages Temp meter, switchgear Dimensions LWH: 1100 x 970 x 2220 mm Weight: approx. 600 kg

Vacuum deaerator Manufacturer: Fryma Type: VE 3 Machinenumber: F703419 Operating hours pump: 158 h Netzsch pump NL 50 A Vacuum pump Dimensions LWH: 2800 x 1250 x 2250 mm Weight: approx. 1000 kg

Bead mill Manufacturer: Drais Type: PM 1 Factory number: 50215 Y.O.M.: 1980 Power: 0.75 kW in Ex-protection Power pump: 0.12 kW in Ex-protection very good condition Dimensions LWH: 800 x 500 x 850 mm Weight: approx. 100 kg

Perforated disc mill Manufacturer: Karl Schnell Type: 062-F28-248 N°: 42686 Power: 21 kW with funnel and discharge chute Control cabinet with on-off button Plug connection Diameter perforated disc: 6 mm Cutting knives as good as new LWH: 1000 x 900 x 1670 mm Weight: approx. 500 kg

Perforated disc mill Manufacturer: Karl Schnell Type: 080 F 248 N°: 42942 Power: 55 kW with funnel and connector Diameter perforated disc: 6 mm Cutting knives as good as new LWH: 1000 x 900 x 1550 mm Weight: approx. 600 kg

DISPERMAT H-drive Type: 4V30M Power: 0.37 kW Speed: 1400 rpm freely adjustable adjustable even in standstill Life-long lubrication