machines and plants for process engineering used for sale (7,563)

Centrifuge Megafuge 1.0 Manufacturer: Heraeus Sepatech GmbH Y.O.M.: 1992 Factory no.: 193398 LWH: 540 x 460 x 380 mm

Centrifuge ROTINA 46 Manufacturer: Hettich Y.O.M.: 1998 Type: 4605 Factory number: 0001489 Speed: 11000 rpm

Agitator 150 litres with gearbox Rexroth 0.18 KW, i = 25 and propeller stirrer 150 mm Container: Single-walled stainless steel container 150 litres with drain tap. Rollable aluminium frame with aluminium profiles 45 45 mm. 4 steering wheels, 2 of them with brake. Geared motor: Rexroth, 3 x 230/400 volts, 0.18 kW, i = 25, n2=53 rpm. With motor protection plug. Shaft: precision stainless steel shaft D10, length 850 mm, diameter 10 mm, Material stainless steel Coupling: 2 clamping sets 17 to 10 mm, material stainless steel Stirrer: three-winged propeller stirrer, diameter 150 mm, material stainless steel 1.4581

Swash-up machine: 2-deck machine: 3.6 m2 / deck product-contacted parts in stainless steel 1.4301 ( AISI ) 2 x Ball knock cleaning Safety clamping screws Lifting device incl. 2 x sied, mesh size as desired: from 0.1 - 5 mm Height of the machine without frame: 1620 kg Weight: 1820 kg. --> Machine completely grounded.

High-performance kneader Volume: 2.5 ltr. Material : product-contacted areas of stainless steel;

Mixing vessel Company: Bäuchle & Sohn N°: 2193/1/2 Built: 1987 Double jacket pressure: 3 bar (insulated) Indoor and outdoor temperature: 150°C Content: max. 400 l min. 50 l Wiper agitator, speed-controlled Jet-flow agitator with 2 stages Temp meter, switchgear Dimensions LWH: 1100 x 970 x 2220 mm Weight: approx. 600 kg

Vacuum deaerator Manufacturer: Fryma Type: VE 3 Machinenumber: F703419 Operating hours pump: 158 h Netzsch pump NL 50 A Vacuum pump Dimensions LWH: 2800 x 1250 x 2250 mm Weight: approx. 1000 kg

Bead mill Manufacturer: Drais Type: PM 1 Factory number: 50215 Y.O.M.: 1980 Power: 0.75 kW in Ex-protection Power pump: 0.12 kW in Ex-protection very good condition Dimensions LWH: 800 x 500 x 850 mm Weight: approx. 100 kg

Perforated disc mill Manufacturer: Karl Schnell Type: 062-F28-248 N°: 42686 Power: 21 kW with funnel and discharge chute Control cabinet with on-off button Plug connection Diameter perforated disc: 6 mm Cutting knives as good as new LWH: 1000 x 900 x 1670 mm Weight: approx. 500 kg

Perforated disc mill Manufacturer: Karl Schnell Type: 080 F 248 N°: 42942 Power: 55 kW with funnel and connector Diameter perforated disc: 6 mm Cutting knives as good as new LWH: 1000 x 900 x 1550 mm Weight: approx. 600 kg

DISPERMAT H-drive Type: 4V30M Power: 0.37 kW Speed: 1400 rpm freely adjustable adjustable even in standstill Life-long lubrication

Gross volume approx. 18 litres, net volume approx. 12 litres Mixer shaft heatable and coolable Double jacket heatable and coolable Product-contacted parts: stainless steel VA Drive is carried out by chain drive and gearmotor Subject to prior sale - Errors possible

Laboratory kneader Volume: 1 litre Product-contacted areas: stainless steel VA Vacuum-resistant Temperable Subject to prior sale - Errors possible

Material : Stainless steel Dimensions: L 4.40 m x W 3.50 m x H 5.00 m --> Complete mixing tower in stainless steel version: --> with plough charmer : Manufacturer: MINOX Type: PSM 2000 / 3 MK Volume: 2000 ltr. Material : Stainless steel 3 x knife heads Main drive: 37 KW.

Material : Stainless steel Drive: 30 KW Volume: 1200 ltr. - incl. control cabinet; --> Mixer with drive mounted on base frame.

Engine number: 100573 Y.O.M.: 2004 Power: 25 kW cross-toothed grinding set Pressure double jacket: 6 bar double-acting sliding ring seal Chetra Pressure product space: 6 bar automatic grinding gap adjustment mounted on stainless steel frame LWH: 1200 x 700 x 900 mm Weight: approx. 350 kg

Machine No.: M 15805 Y.O.M.: 1992 Pressure working space: 1 bar Pressure double jacket: 6 bar Inline version horizontal Product Connections Triclamp very good condition LWH: 400 x 260 x 240 mm Weight: approx. 30 kg

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

Comm.: 63006828 Y.O.m.: 2012 Capacity: 8m3/h at 372 rpm 1.2m3/h at 63 rpm LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

No.: 469543 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

Jetstream mixer with tripod Power: 0.82 kW Exx Protection T4 Stainless steel tripod (mobile) height-adjustable, swivelling Switchgear in Exx Powder infeed and dispersion possible Condition very good LWH: 900 x 700 x 1900 mm Weight: approx. 120 kg

Y.O.M.: 2002 Factory No.: 02050057 Power: 500 l/h, motor: 22 kW Pressure: 1000 bar as good as new with manual Dimensions LWH: 1400 x 1000 x 1250 mm Weight: 900 kg

Laboratory mill Factory number: L10116 Y.O.M.: 1985 Workspace pressure-resistant: 4 bar with funnel, circulation line and three-way valve Power: 0.75 kW, 380 V Grinding set cross-toothed Mill and grinding set as good as new Switchgear with emergency stop LWH: 300 x 300 x 650 mm Weight: approx. 30 kg

Factory number: L10113 Y.O.M.: 1984 Workspace pressure-resistant 4 bar with funnel, switchgear 380 V Circulation line with three-way valve Power: 0.75 kW Grinding set cross-toothed good condition LWH: 300 x 300 x 650 mm Weight: approx. 30 kg

Machine number: M16694 Y.O.M.: 1995 Working pressure: 6 bar Double jacket: 6 bar Grinding set normally toothed Power: 60 kW case with double jacket Product-in-outlet milk pipe double-acting mechanical seal LWH: 1100 x 700 x 800 mm Weight: approx. 350 kg

Factory number: 78046 Power: 24 kW Engine in EEx Switchgear not in EEx with funnel and chute Operating Instructions, spare grinding set LWH: 700 x 700 x 1500 mm Weight: approx. 300 kg

Machine No.: 2009.14 Power: 5.5 kW Pharmaceutical version as good as new Stainless steel with funnel (approx. 60 l) Switchgear EEx various spare parts, new cross-toothed grinding set LWH: 800 x 700 x 1400 mm Weight: approx. 120 kg

Y.O.M.: 1991 Machine No.: M15177278 Power: 18.5 kW with funnel, circulating line with three-way valve LWH: 800 x 600 x 1600 mm Weight: approx. 250 kg Attention: no mechanical seal included, can be reinstalled upon request

Exhaust filter diesel particulate filter cleaning system for free burning of clogged particulate filters. Consisting of heating element and control. Nh7p9 Connection 400 Volt Power 9,000Watt