machines and plants for process engineering used for sale (7,696)

Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Allestimento: Insulation,Stato: used,Volume / Litri : 250.000,Design: upright,Standing form: Frame,Insulation: present,Insulating sheath: riveted,Insulation material: PU foam,Material insulating jacket: Aluminium,Insulation thickness: 150,Diameter outside: 4.550,Total height: 22.950,Wall thickness underbody: 15,Wall thickness cylinder: 5,Technical documents: various documents,Type plate: Yes,Discontinued: available,Last use: Brewery,Material in contact with the product: V2A 1.4541 ( AISI321),Ground Bearings: No,Power Disturbers: No,Ground Bearings: No,Power Disturbers: No

Signal columns, signal lights, signal lamp, indicator light, signal tower -Manufacturer: Telemecanique, signal light 4 colors -Type: XVB -Voltage: 24 V -Dimensions: Ø 76 x 410 mm -Weight: 0.7 kg

Heraeus Thermo UT 6200 Drying Oven For sale is a used laboratory heating stove of the renowned brand Thermo – type UT 6200, manufactured in Germany. Technical details: Model No.: UT 6200 Order number: 51001655 Factory number: 8907974 Max. temperature: 300 °C Supply voltage: 230 V Frequency: 50 Hz Power consumption: 2.60 kW Current consumption: 11.8 A Protection class: Class 3.1 Degree of protection: IP 20 Temperature protection: DIN 12880/1 Condition: Used, fully functional. Externally with slight signs of wear (see pictures). More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Colortronic Dry-Flex M400 Granulate Dryer For sale is a used Dry-Flex M400 granulate dryer from the manufacturer Colortronic. Technical details (according to the nameplate): Manufacturer: Colortronic, Friedrichsdorf (D) Model: Dry-Flex M400 Year of manufacture: 11/2012 Control panel: 6AV6642-0BA01-1AX1 Operating voltage: 400 V / 50 Hz Heating capacity: 33 kW Drive power: 5.5 kW Operating pressure: max. 6 bar Design: Granulate dryer / plastic dryer Application: Plastics processing, injection molding, extrusion Condition: Used, functional Buy Colortronic Dry-Flex M400 Granulate Dryer and other items at low prices – Here you can buy goods from the professionals for the professionals – In our SHOP you will find more attractive offers.

Control, control block, pneumatic control -Manufacturer: Festo, pneumatic control -Solenoid valves: Type 533345 / 533342 6 pieces each -Electronic module: MPA1-FB-EMG-8 3 pieces -Interlinking block: CPX-GE-EV-S / CPX-FB13 -Interlinking block: CPX-GE-EV / CPX-AB-8-M8 -End plate: CPX EPL-EV -Electronic module: MPA1-FB-EPL-EU -Valve terminal: MPA-FB V1 -Individual components: see photos -Shipping/Price: complete -Dimensions: 580/130/H60 mm -Weight: 3.6 kg

Control, control block, pneumatic control -Manufacturer: Festo, pneumatic control -Solenoid valves: Type 533345 3 pieces / 533342 9 pieces -Electronic module: MPA1-FB-EMG-8 3 pieces -Interlinking block: CPX-GE-EV-S / CPX-FB13 -Interlinking block: CPX-GE-EV / CPX-AB-8-M8 -End plate: CPX EPL-EV -Electronic module: MPA1-FB-EPL-EU -Individual components: see photos -Shipping/Price: complete -Dimensions: 530/130/H60 mm -Weight: 3.4 kg

Control, control block, pneumatic control -Manufacturer: Festo, pneumatic control -Solenoid valves: Type 533345 / 533342 6 pieces each -Electronic module: MPA1-FB-EMG-8 3 pieces -Interlinking block: CPX-GE-EV-S / CPX-FB13 -Interlinking block: CPX-GE-EV / CPX-AB-8-M8 -End plate: CPX EPL-EV -Electronic module: MPA1-FB-EPL-EU -Valve terminal: MPA-FB V1 -Individual components: see photos -Shipping/Price: complete -Dimensions: 580/130/H60 mm -Weight: 3.6 kg

Salt spray test by Weiss Salt Spray Test Chamber with Corrosion Testing Specifications: Test chamber capacity 480 l max. load 100 kg Brine storage tank 180 l Applications: Corrosion tests: Salt spray test: Room temp. up to +50 °C Condensation water test: Room temp. up to +45° Extensive documentation available incl. wiring diagram, parts list, manual, etc The plant is still fully functional. It is located in a research facility and has rarely been used.

A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible.

Various plate, bag and candle filters from lafonte Models: MIX 7D2 EVT12 GAM MIX 15D2 EVT20 GAM MIX 15C2 EVT20CER GAE

Mefiag Satilum filter system Long Life Unit 3x with control system

8x lafonte plate filter BIG 36D3 KPP951 TX

IKS Cooling System

ProMinent VAMC07026PVT00PM00

ProMinent ALPC1008PVT20P30

8x ProMinent dosing pumps DLTA1020PVT2000UA1030DE0

Control screening machine BÜHLER MKZF 40/90 D 11 kW Very good condition

Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.

Condition: brand new,Volume / litre: 105,000,Specific gravity of the medium ( to/m³): 1,250,Lower bottom: flat bottom,Top bottom: conical bottom,Design: upright,Diameter outside / mm: 3,342,Cylindrical height / mm: 12,000,Total height / mm: 12,500,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 2,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, disc valve,Outlet: DN80 DIN 11851 , Remarks: Pictures shown are of an identical tank with a slightly smaller volume, material in contact with the product: V4A 1.4401/04

Two screw compressors are available. 1) Prematic PAKO 1201/270, year of manufacture: 2008, displacement: 1200l/min, flow rate: 925l/min, tank volume: 270l, speed: 700rpm, power: 7.5kW, operating pressure: 10bar, operating hours: approx. 5257h. 2) Atlas Copco GA7FF, year of manufacture: 1999, operating pressure: 8bar, flow rate: 1092l/min, power: 7.5kW, speed: 3000rpm, weight: approx. 250kg. Documentation available. An on-site inspection is possible.

Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible.

A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range ...

Process chiller / chiller air-cooled, Type: TAEevo TECH MINI M05 MTA S.p.A. TAEevo TECH MINI M05 are small compact water cooling units designed for indoor installation are suitable. Including buffer tank (open system, no pressure tank) and built-in circulation pump. Cooling capacity kW 1.73 Cold water temp. Exit/inlet: 7 / 12°C, Volume flow m³/h 0.286 Available pump pressure bar 3,342 Ambient temperature °C 32, Refrigerant R 410A Electrical data: Voltage V 230, frequency Hz 50, phases Ph 1, Max. power consumption (kW) 1.6 Max. current (A) 7.5 Starting Current Circuit (A) 20 Protection class: IP33 Dimensions: Length mm 660, Width mm 486, Height mm 623, Weight kg 71 Connection Rp 1/2" Serial No.: 2200422920 Year of construction 2025 Condition: Optical 2, Technically ok used Used machines can have visual defects due to their use. (Technical chang ...

A compact and mobile BWT reverse osmosis system including integrated tank is available. Throughput capacity: approx. 160l/h, recovery (WCF): 40%-75%, salt retention rate: over 98%, permeate conductivity: below 20µS/cm, tank volume: 50l, membranes: 1. Machine dimensions X/Y/Z: approx. 350mm/560mm/750mm, weight: approx. 55kg. Documentation available. An on-site inspection is possible.

A Wolf exhaust unit for wet rooms is available. Air volume flow: 1000m³/h, pressure loss (external): 200Pa, motor power: 0.25kW, motor speed: 1500rpm. Documentation available. An on-site inspection is possible.

Process chiller / chiller air-cooled, Type: TAEevo Tech 201P3-20 MTA S.p.A. TAEevo Tech 201 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 44.2 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 7.53 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 23.69 Max. current (A) 39.83 Starting Current Circuit (A) 134.4 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Serial No.: 2200412190 Year of construction 2 ...

2 identical NH3 Bitzer cooling machine systems Standing on sturdy frames supervised by Anderten Kälte-und Klima GmbH Type:OSKA 8571-K Year of construction 2006

CARRIER Absorption Chiller Super Absorption Grey Manufacturer: Carrier Type: Absorption Cooler Super Absorption Condition: used, complete, no external damage