machines and plants for process engineering used for sale (7,458)

Step screen for separating dirt and suspended solids from wastewater. The screenings are transported step by step to the outlet by a moving set of lamellae. Suspended solids that are smaller than the gap dimensions are also transported through the screenings carpet.The screen was overhauled in 06.2023.

Horizontal single-stage exhaust air scrubber with integrated liquid tank, packing and mist eliminator for cleaning exhaust air containing acids and lyes. Principle: A scrubbing liquid is injected into the horizontally inflowing exhaust air in a circuit. Water-soluble impurities are washed out by adding alkalis or acids.

Belt filter pressThe machine consists of a completely closed, strong sheet steel housing with synthetic resin coating, the lower part of which is designed as a filtrate collection basin.

Stainless steel tanks Capacity 250 litres Cylindrical stainless steel tank standing on feet single-walled, hinged lid Agitator from above Dimensions: Diameter inside 63 cm Diameter outside 65 cm Cyl. Height 80 cm Outlet DN 40

Product: Sylysia 350, Gasil 23 D, Precarb 800, Calcilit, Benzophenone (partially lumpy), Lo-Vel 8100, Syloid 7000, bulk density: 0.08-0.73kg/l, particle size: powder, product temperature: 5-30°C, moisture: dry, consistency: free-flowing, non-sticky and non-agglomerated, system capacity: according to customer-provided container handling, operating mode: 3-shift operation, installation location: indoors/heated, ambient temperature: 5-30°C, power supply: 400V, 3Ph,N, 50Hz, control voltage: 24VDC, compressed air supply: 4-6bar, oil-free, max. surface temperature: 200°C, with documentation. An on-site inspection is possible, not connected to power.

We offer directly on behalf of the owner : Daikin EWAT240B-SLB2016 – air-cooled chiller R32 Manufacturer: Daikin Type : EWAT240B-SLB2016 Year of construction : 09/2022 Nominal cooling capacity : 241 kW Compressor : 4 × scroll Refrigerant: R32 Refrigerant capacity: 19 kg Temperature range TS: -20 / +150 °C EQUIPMENT / OPTIONS - OPTION-04 Compressor Direct Start (DOL) - OPTION-10 Second Setpoint - OPTION-128 master/slave control, max. 4 machines - OPTION-57 Evaporator Heat Trace - OPTION-60 Electronic Expansion Valve - OPTION-67 Ambient temperature sensor and setpoint shift - OPTION-68 Hour Meter - OPTION-69 Collective fault message - OPTION-70 External Alarm Contact - OPTION-97 Main switch - OPTION-11 Thermal Protection Relay Compressor - OPTION-21 Evaporator Flange Connection Kit - OPTION-58 Evaporator Flow Switch - OPTION-61 Hot Gas Shut-off Val ...

A new, unused EVG Lufttechnik high-temperature centrifugal fan is offered. Volume flow: 245m³/h, max. speed: 5270rpm, max. medium temperature: 500°C, total pressure difference: up to 6172Pa, motor power: 1.5kW, voltage: 230/400V, efficiency class: IE3, degree of protection: IP55, weight: approx. 165kg. With Motovario electric motor and V-belt drive. Documentation fully available.

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1445, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h

Gettinge GE 91413 ARC-2 pass-through autoclave in a two-door pass-through design with an automatic, horizontally sliding door; unit fitted with a cross-contamination barrier; previously used for metal format parts, dosing pumps, stoppers, filters, clothing, etc., chamber dimensions 950 x 1450 x 1350 mm (WxHxD), usable chamber space 920 x 1450 x 1350 mm (WxHxD), chamber volume approx. 1859 litres, chamber pressure -1.0 / +3.0 bar, design temperature 143.6 °C, colour laser printer for programme documentation, Siemens S7-300 machine control system, Siemens MP 277 Touch control panel, electrical supply 230/400 V/50 Hz/3-phase, machine dimensions approx. 3100 x 2350 x 1710 mm (WxHxD), autoclave unladen weight approx. 2450 kg

Bosch SBM Schoeller-Bleckmann Vakutherm ADV-12.09.12/2 steam steriliser, internal chamber dimensions 1300 x 1000 x 1250 mm (HxWxD), chamber usable space 1200 x 900 x 1200 mm (HxWxD), entry height 450 mm, chamber: cubic with rectangular door opening and jacket for heating and cooling, chamber made of 1.4404 (316L), 0.8 µm, polished. Design pressure, chamber: -1.0 / +3.0 bar (g), design pressure, jacket: 0.0 / +3.0 bar, design temperature: 150 °C, vacuum pump with water-saving circuit for evacuating the steriliser chamber; transport trolley for loading the steriliser fitted with 2 swivel castors and 2 fixed castors; machine dimensions with integrated control cabinet: 3,900 x 4,515 x 1,850 mm (HxWxD); empty weight of the steriliser: approx. 3,000 kg

Machine name: Chamber filter press used Manufacturer: Diefenbach Type: FP DE800-90 Year of Make: 1997 Plate format: 800 x 800 mm Number of plates: 90 Press capacity: approx. 1350 litres Filter area: Approx. 99 m2 Filter pressure: 15 bar Cake thickness: 30 mm Procedure: Closed Plate Conveyor: Automatic Panel material: Polypropylene Design: Bridge spar press Filter Cloth Washer: No Filter Cloths: No Dimensions: L 8500 x W 1300 x H 2100 mm Empty weight: approx. 8000 kg Tech. Documentation: Yes Accessories: A control cabinet, a hydraulic system, a light barrier Condition: Used Price: On request

Machine name: Filter press used Manufacturer: Netzsch Type: 800/80 Year of Make: 1998 Plate format: 800 x 800 mm Number of plates: 81 Press capacity: approx. 1200 litres Filter area: Approx. 88 m2 Filter pressure: 15 bar Cake thickness: 30 mm Procedure: Closed Plate Feed: Manual Panel material: Polypropylene Design: Side-spar press Filter Cloth Washer: Yes Filter Cloths: No Empty weight: approx. 7000 kg Tech. Documentation: Yes Accessories: A control cabinet, a hydraulic system, a light barrier, a filter cloth washer, high-pressure pump. Condition: Used Price: On request

Compact 2-deck vibratory screening system (custom-made) For sale is a robust, fully functional 2-deck vibratory screening system custom-built in 2017. The system was specially designed for the precise screening and dusting/classification of feed pellets, but is also ideally suited for a wide range of other bulk materials (e.g. granules, pellets, seeds, wood pellets, etc.). The screening plant is in good, well-maintained condition, is immediately ready for use and is characterized by its compact design and high-quality workmanship. Technical data & equipment: - Type/type: Vibratory screening system / Linear vibrating screen (custom-made) - Year of construction: 2017 - Condition: Used, good, fully functional - Drive: 2x Netter Vibration Motors (Type NEG 50120) - Power connection: 400 V high-voltage current (incl. connection cable and CEE plug) - Screen levels /  ...

For sale is a high-quality and fully equipped laboratory / compact pellet press from the renowned manufacturer Amandus Kahl (Type 14-175) including precise K-Tron dosing screw, Rittal control cabinet and extensive accessories/spare parts. The system is ideal for test setups, laboratory applications or smaller productions in the pharmaceutical, chemical or food industries as well as for special applications, as the parts in contact with the product are made of high-quality stainless steel. Technical data & equipment: Pellet mill Amandus Kahl: - Manufacturer: Amandus Kahl (Hamburg, Germany) - Type: Press 14-175 - Machine No.: 22374 - Year of construction: 2006 - Certification: CE - Drive motor: 3.0 kW (220–240 / 380–415 volts) - Speed: Infinitely variable up to 101 rpm - Die: Diameter 150 mm - Press rollers: 2 pieces K-Tron dosing screw (produ ...

Stainless Steel Continuous Mixer Manufacturer: MWM Type 400 V-K Content: 400 litres Technical specifications : Machines No. 650 Continuous Mixer with Inclined Bucket Mixing Tool and Chopper Dimensions: length 3.00 m, height 1.00 m + 1.10 frame, width 1.30 m Engine: Power 15 kW, 1,460 /94 rpm Mixing shaft 94 rpm Documents: Nameplate

An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible.

A mixing tank with propeller agitator is offered. Volume: approx. 4000l, internal height: approx. 2000mm, internal diameter: approx. 1650mm, internal material: acid- and alkali-resistant plastic, outer shell: GRP. Equipped with mixing system: variable-speed propeller agitator, manhole, air-operated diaphragm pump for product feed, bottom drain, extraction system and working platform. An on-site inspection is possible.

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit teco wi -Type: teco 1000 -Heating output: 18 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the type plate -Dimensions: 1190/320/H745 mm -Weight: 102 kg

1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capac ...

Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement.