grinding machines wood used for sale (680)

Number of sanding units: 4 St.sanding width: 200 mmSanding height max.: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St.sanding width: 190 mmSanding height max.: 2-180 mmLÖWER-Doppelseitige Schleifmaschine DSM 2000Doppelseitige Einzelholzschleifmaschine zum Schleifen vonMassivholz wie z.B. Fensterhölzern etc. Stabile Top-Aus-führung mit langen Gußtischen, Bürst- und Finisheinrichtungund Transportbandvorschub. Geeignet für hohe Dauerbelastungauch bei höheren Spanabnahmen.- versetzt angeordnete Schleif- und Finishaggregate oben und unten- direkt angetriebene gummierte Schleifrollen für schlupffreie Kraftübertragung- Kombischliff über Rolle und Schuh für hohe Spanabnahmen bei gleichzeitig ebener Eingriffszone- wartungs- und verschleißfreie CERMET-beschichtete Schleifschuhe mit sehr guter Wärmeleitfähigkeit und absoluter Maßhaltigkeit- Fremdkühlung der Schleifzonen für einen kühleren Schliff und höhere Schleifbandstandzeiten- zwangsgeführte pneumatisch gesteu ...

connected load frequency: 230 Voutput: 1,2 KWtaper diameter: 19mm mmturning speeds: 1000 - 3000 U/minroll surface width: max. 100 mmroll length: max. 120 mmweight: 2,8 kgrange L-W-H: 430 x 280 x 100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St.sanding width: 100,150 mmSanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 4 St.sanding width: 200 mmSanding height max.: 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St.sanding width: 290 mmSanding height max.: 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 st.sanding width: 390 mmSanding height max.: 390 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 Stsanding width: 190 mmSanding height max.: 2 - 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 8 st.sanding width: 180 (260) mmSanding height max.: 160 mmDimensions (L/W/H): 3065x1600x1900 mmweight of the machine ca.: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weibert KS30 Edge grinding machine with oscillation, rotary star and veneer cut with rotary star 60-100-120mm WEIBERT WJ-KS30 new 400V 3 KW (4 hp) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Abrasive back wall 1050x200 mm Band speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 hp) Can be switched on/off Machine table and guides made of GRAUGUSS Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzles 120 mm Rotary star with 3 additional contact rollers 60-100-120mm Bandwidth 150 mm WJ-R00200K1 Roller pull-out table widening

Weibert WJ-KS26 Edge grinding machine with oscillation NEW MACHINE! 400V 3 KW ( 4 hp) S1 100% n=2840 min. Grinding table 750x300mm Table height adjustment 200mm Abrasive back wall 850x200mm Grinding belt dimension 2600x150mm Grinding unit swivelable 90°-45° with quick adjustment Band speed 20m/sec. Oscillation on and off motor 0.25 KW (0.34 hp) Central suction connection 120mm Manual adjusting m degree display! WJ-R00100 The following options included in the price! Roller pull-out table widening WJ-R00101 Miter stroke WJ-R00102 Driving device WJ-R00103 Feed machine 3 rollers 120mm with bracket special price

Grinding machine for curved parts Molded part grinding machine Make Calmbach & Söhne Double-sided grinding of shaped parts Oscillating rubberized grinding rollers Workpiece thickness maximum 120 mm Workpiece width maximum 130 mm Engine strength 2 motors 1.5 kW each Oscillation electromotor 4 speeds Suction connection diameter 120 mm Includes 20 grinding belts grit 60 + 120 Dimensions 1200 mm x 1500 mm x H 1550 mm

Grinding machine • For grinding curves and internal radii

Automatic oscillating curve grinding machine Grinding width 300 mm Grinding height from 3 - 100 mm Feed continuously from 25 - 25 m/min Feed motor 0.55 KW Drive motor 7.5 kW Grinding belt 320 x 2000 mm

Drawer fitting machine husband Type: XII LOD 2 oscillating abrasive belts Grinding wall surface 760 mm long x 280 mm high max. drawer width - fit width 1000 mm maximum drawer height 250 mm Width adjustment by handwheel Support tables on each grinding wall outside Support table size 650 mm x 235 mm Engine strengths 1 x 4.8 kW and 1 x 7.5 kW Dimensions 1900 mm x 1300 mm x H 1200 mm

Table belt grinding machine Bürkle L x W x H: 3.5 x 1.7 x 1.8 m Built in 1963 Weight approx. 650 kg The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

OSS 100 Spindle Sander Working table length 370 mm Work table width 295 mm Speed 2000 min¯ ¹ Sanding caps diameter 13, 19, 26, 38, 51, 76 mm Spindle diameter 12.7 mm Oscillation stroke 16 mm Oscillation 58 min¯ ¹ Engine 450 W 230 V 50 Hz Dust nozzle diameter 38 mm Length 390 mm, width / depth 330 mm, height 450 mm Weight 14 kg G & pieces 5903500 Option: Subframe

OBSS 100 Spindle belt sander Working table length 430 mm Work table width 410 mm Speed 2000 min¯ ¹ Grinding sleeve diameter 13, 19, 26, 38, 51 mm Spindle diameter 12.7 mm Oscillation stroke 16 mm Oscillation 58 min¯ ¹ Belt length 610 mm, belt width 100 mm Bandumlaufgeschwindigkeit(en) 8 m/s Surface length 220 mm, width 100 mm Supply voltage 230 V 50 Hz Suction nozzle diameter 38 mm Length 480 mm, height 530 mm, width / depth 480 mm Weight 12 kg G & pieces 5903501 Option: Stand with door

NTS 200 Wet grinder Grinding wheel diameter 200 mm Grinding wheel width 40 mm Honing diameter 220 mm Honing wheel width 30 mm Speed 120 min¯ ¹ Power drive motor 0,12 kW Power output drive motor 0.06 kW Supply voltage 230 V 50 Hz Motor speed 1400 348 mm, width / depth length 285 mm, height 275 mm Length max 460 mm, width / depth 380 mm, height 435 mm Weight 9.2 kg G & pieces 5750200 Option: Stand with door

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

Wood strength KSO 1500 Edge sanding machine with swiveling grinding unit oscillating belt 2260 x 150 mm belt Contact surface 770 x 150 mm Belt speed 16 m / sec. Cast iron table size 680 x 310 mm Engine power: 400 V 50 Hz 1, 5kW 2 suction nozzle with diameter 100 mm Weight 162 kg G & pieces 5368150SET

Edge grinding with oscillation and veneer sanding WEIBERT new WJ-KS30 400V 3 KW (4 HP) n = 2840 RPM Work table 960 x 350 mm Table height 230 mm Belt rear 1050 x 200 mm Belt speed 20 m / sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 PS) A/can be switched off Machine table and guides made of grey cast iron Quick adjustment of tilting 90 °-45 ° with degree display Weight 400 kg Dust nozzle 120 mm Rollers pull-out extension table Band width 150 mm WJ-R00200 option: Band width 200 mm WJ R00300

Belt/ozilierend swiveling Roll in the table

This DMC US 2000 M4 belt sander was manufactured in 1999. Ideal for detailed sanding work, it offers precision and efficiency. Consider the opportunity to buy this DMC US 2000 M4 belt sander. Contact us for more information.

This Kundig Premium 2 1100-RE belt sander was manufactured in 2007. It features a working width of 1100 mm and can handle workpiece heights from 3 to 200 mm. The machine includes a rubber roller, segmented pad with belt cleaning, and a vacuum conveyor belt. It operates at 400 V and 57.5 A, with a power of 28.4 kW. Contact us for more information about this machine.

This Kundig Premium-2 1100-RE belt sander was manufactured in 2007. Ideal for woodworking, it features a robust design for consistent performance. Consider the opportunity to buy this Kundig Premium-2 1100-RE belt sander. Contact us for more information.

This STETON LEV2RR was manufactured in 2004. It features a dual contact roller configuration, ideal for sanding and calibrating solid wood, boards, or veneers. With a working width of approximately 1300 mm and a maximum working height of 150 mm, it is equipped with a conveyor feed and connections for a dust extraction system. Consider the opportunity to buy this STETON LEV2RR belt sander. Contact us for more information about this machine.

Key data: 1100 mm

DMC Polisand 110 RP wide belt sanding machine year 1998 Varnish Wide belt sanding machine total installed power approx, 23 KW Sanding width 1100 mm Workpiece thickness up to approx, 170 mm Motorized height positioning with digital reader Vacuum transport belt, F,LLI FERRARI vacuum unit with motor power 4 KW Feed motor power 1,50 KW Aggregate 1: grooved rubber sanding roller, with blowers Aggregate 2: sanding pad, with blowers Both groups are driven by an 15 KW motor 380 V / 50 Hz weight 2300 Kg Dimensions: 2,45m x 1,85m x 2,0m

Wide belt sander SCM Sandya 40 M1 year of construction 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Sanding width 1.350 mm Workpiece thickness min 4-170mm 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table       Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disc brake Rubber coated pressure rollers Automatic carpet centring Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg