grinding machines wood used for sale (641)

Manufacturer: Bütfering, Type: Profiline SCR/RRR, Year: 2007, Sanding width mm: 1350, Sanding hight mm: 3-160, Number of sanding belts: 3, Sanding belt dimensions: 13702620, Rollers: 3, Rubber roller: 1, Steel roller: 2, Shore roller 1: 70 , Bürstenaggregate: 1, Band 1 Leistung kW : 37, Band 2 Leistung kW : 30 , Band 3 Leistung kW : 22, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 7, Constant table hight: yes, Vacuum table: yes, Weight in kg: ca. 2020, Year :2007

Manufacturer: Sorbini, Type: VS/32-BT-S 2000, Year: 1999, Number of units: 2, Working widht mm: 1350, Through running hight max mm: 80, Diameter of brushes: 150, Number of rotations controlled: yes, Units mounted upright: yes, Through running hight max mm: 80, Axle-diameter: 60, Engine power - kW: 1,5, Required space L x W x H mm: 2500 X 1200 X 1600, Type of use: Reinigen oberflächen, Year :1999

Manufacturer: Rippert, Type: ST 80 2500 R, Working widht max mm: 2000, Max. working depth in mm: 800, rotations rpm: 2900, Engine power kW: 1,5, Flow rate approx. m3/h: 1600, Working height in mm: 835, FREE TEXT: 2 Staubkästen/Filterreiniung,

Manufacturer: Heesemann, Type: FGA 6, Year: 1990, Monting of the machine: L, Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Cross sanding unit: no, Shoe unit: yes, Shoe unit: yes, Elektronische Tastung mm: 40, Power belt 1 in kW: 11, Constant table hight: 950, Vacuum table: yes, Pressure pads for short workpieces: yes, Brushing unit: yes, Year :1990

Manufacturer: Heesemann, Type: Profilklotzeinschleifgerät PWST, Bauyeshr : 1994, Control: hand, Sanding belt hight: 80, Tischlänge mm : 800, Work piece hight min - max mm: 80, Control panel on top: yes, radius sanding device: yes, Profilwerkzeug-Formschleifmaschine PWS-T <CRLF>für das massgenaue Schleifen der Konturen vorgearbeiteter<CRLF>Profilwerkzeuge, bestehend aus<CRLF>über Getriebemotor oszillierend,<CRLF>Profilwerkzeuge auf Kreissegment schwenkbar gelagert.<CRLF>, Year :1994

Manufacturer: DMC, Type: Topsand, Monting of the machine: Walze/Walze/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Steel roller: 1, Shore roller 2: 70, Längsschleifaggregate: ca.30, Belt 2 shoe unit: 22, Belt 2 synchronous and reverse run: 17, Combi unit roller/shoe: 5-25, Table hight adjustment by engine: ca.2, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Vacuum table: yes,

Manufacturer: Arminius, Type: ST 2, Year: 1991, Control: Hand, Table length: 2000, Work piece hight min-max mm: 10-60, Feeding speed min-max m/min: 5-25, Controllable slewable: yes, Number of sanding units: 2, 1st sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, 2nd sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, Power kW: 1,1, Power kW: 1,1, Control panel at bottom: yes, Hight adjustment by hand wheel: yes, Year :1991

Manufacturer: Evimatic, Type: HF 82 CB, Year: 2000, Control: yes, Control: yes, Work piece width min-max mm: min. 200, Schleifaggregate rechts : 2, Unit 1 tiltable: yes, Aggregat 1 kW: ca. 1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Number of frequency controlt belts: 2, Brushing unit: 1, Total lenght mm: 2500, Year :2000

Manufacturer: Johannsen, Type: Langbandschleifer, Year: 1992, Table width mm: 800, Table length: 2799, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 350, 2 rotary directions: yes, Exhaust diameter mm: 140, Hight adjustment by engine: yes, Year :1992

Manufacturer: Johannsen, Type: T 94, Year: 1993, Sanding hight mm: 350, Table width mm: 800, Table length: 2700, Hight adjustment by engine: yes, Sanding belt engine kW: 4, 2 rotary directions: yes, Exhaust diameter mm: 120, Hight adjustment by engine: yes, Year :1993

internal diameter: min / max: 10 / 250 mmgrinding depth: 400 mmexternal diameter: max. 380 mmswing dia.: 390 mmtable:: table travel: max. 550 mmstroke of the table: min. 2 mmrapid traverse: 10 m/mintable speed -stepless-: 0 - 10 m/minrough adjustment: 18 mmfine adjustment: 4 mmmax. workpiece weight: 100 kgWorkhead.: spindle head: B 6 DIN 55021spindle turning speed - stepless: 15 - 1.500 U/minpivoting angle: +/- 30 Gradspindle bore: 50 mmpower capacity: 2 kWinternal grinding:: rapid traverse: 0 - 250 mm/minstroke: 70 mmpower requirement: 3 kWtotal power requirement: kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 3,0 x 3,0 x 3,2 mDocuments: exhaust fan: Fibaron paper band filter: Polo Fire extinguish system: Deugra Internal Grinding MachineBAHMÜLLER - JES 12The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wide belt grinding machine Boere Elite 1300 BK Grinding width max. 1300mm Grinding calibration roller from below

Wide belt grinding machine OTT RS-O Grinding width: 1300mm Calibration roller + fine sanding + cleaning brush

Wide belt sanding machine for wood, veneer and varnish Ernst LBK 1300 Grinding width: 1300mm Transverse grinding unit Longitudinal grinding unit

width of the strips: 75 mmband length: 2000 mmband speed: 37 m/mintotal power requirement: 3 kWweight of the machine ca.: 0,084 tdimensions of the machine ca.: 1x0,5x1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power connection 380V 7.3kW Extraction 1x120 mm 1x180 mm Grinding table 2850 x 1550 mm Sanding belt dimensions 7820 x 150 mm Table height adjustment via handwheel LxDxH: 4400 x 1700 x 1450 mm Weight approx. 1100 kg

width of the strips: 75 mmband length: 2000 mmband speed: 37 m/mintotal power requirement: 3 kWweight of the machine ca.: 0,11 tdimensions of the machine ca.: 1x0,5x1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1100 mm, 1 , 150 mm

Combination grinding unit with contact roller and air grinding shoe Brush roller Abrasive belt tension, pneumatic motor strength adjustment Specifications: max. working width 1100 mm Max. workpiece thickness 150 mm Min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power grinding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0kW Operating pressure 6 bar Air pressure approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Cntaou7R Machine depth approx. 1700 mm Machine height approx. 1900 mm

Key data: 110 mm, 1 , 160 mm

Specifications: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec. Feed speeds: 4 + 8 m/min. Motor power grinding agregate: 11 kW, power adjustment: 0.55 kW, feed carpet: 1.3/1.8 kW Operating pressure: 6 bar, Air requirement: 10 l/min., Suction nozzle: 1 x 150 + 1 x 120 mm WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding shoe with automatic insertion and removal - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by the grinding unit - Automatic centering of the feed carpet - Extension carpet with high quality rubber circular hole carpet and auto. Carpet centering - Pneumatic sanding belt tension with length compensation - Non-contact abrasive belt oscillation, electronic - Low ...

Key data: 1350 mm, 3

electronic control - First roller D=250 mm made of grooved steel - Second roller D=320 mm made of rubber - third roller D=? mm made of steel with carpet with button - Pneumatic on/off of the 3 groups - Air purification fan on the 3 bands - Sanding belt 2620 mm - Electronic oscillation of the abrasive belts - Automatic layer positioner - Variable feed speed of the carpet with inverter KW 2.2 - Vacuum conveyor belt - ionization in the outlet

grinding length: 600 mmgrinding width: 400 mmworkpiece height: mmtotal power requirement: 11 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 1 st.sanding width: 150 mmSanding height max.: 150 mmLoewer edge finishing machine MiniSpin NMachines for finishing and fine sanding ofEdges and profiles with a grinding spindlehorizontal or vertical.Motor 0,75 KWSpindle in vertical position for machining edgesPivoted spindle in horizontal position, laterallyetc. for processing longer profile bars orConjunction with a combined grinding head for grindingof edges with a grinding disc bladesGrinding head swiveling + / - 20 ° for editingoblique linesWorking height / width 150 mmmax. Diameter roller / brush

grinding length: 600 mmgrinding width: 300 mmworkpiece height: mmtotal power requirement: kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 2,9 x 2,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1.5 KW, 400 V, 50 Hz, Oscillatation, Abrasive belt 150x2515 mm, Height-adjustable table 840x300 mm, Side table for curves 250x300 mm, Swivel up to 90°, angle stop, Extraction connection 100 mm, Weight 146 kg

grinding length: 1.000 mmgrinding width: 600 mmworkpiece height: 400 mmControl: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mmtravel cross (z-axis): 540 mmdistance table surface - grinding spindle centre: max. 600 mmTravel vertical (Y-axis): 500 mmMax. working height on new grinding wheel: 400 mmworkpiece table: : Electro permanent magnetic plate: 800 x 500 mmpole pitch: 18 mmclamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/minElectromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mmmeasuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mmElectromechanic ...

Key data: 1100 mm, 2

Wide belt grinding machine Manufacturer: Böttcher & Gessner Model: 780 Grinding width 1100mm Aggregates 1x calibration roller 1 x Finishing touches 1 x Cleaning Brush

Grinding machine (lower grinder) Heesemann type LSM 8 – U Specifications: • Cutting width (mm): 1300 • Workpiece thickness max. (mm): 3 -140 • Brushing device: brush roller diameter 150 mm • Drive for brushing device (kW): 1.5 • Transport bed: 3.0 kW FU 4.0 kW • Feed speed (m/min.): 5 - 25 • Workpiece conveyor belt suction clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total electricity connection (kW): approx. 73

Working width: 1350 mmNumber of sanding units: 1 st.Workpiece thickness max.: 160 mmsanding belt measurements: 1370 x 2150 mmFeed motor: 0,75 PSUnitek wide belt sander Excel LC 1350 1N KRT---------------------------1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOEFOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING- Usable WORKING WIDTH mm 1350- GRINDING BELT LENGTH mm 1370 X 2150- MAX. WORKPIECE THICKNESS mm 160- Steel CALIBRATION ROLLER mm 180- GRINDING SHOE WIDTH mm 50- BAND MOTOR POWER HP 15- BELT SPEED m/s 18- FEED MOTOR POWER HP 0.75- Adjustment gear feed carpet with infinitely adjustable speed m/min 4/20- HEIGHT ADJUSTMENT MOTOR HP 0.33- Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM”- 1 PC. DRUM BRAKE for belt braking- Swivel ROLLER for belt tension- 2 pcs. PRESSURE ROLLERS, with rubber coating- EMERGENCY STOP SWITCH EDGE in the inlet- ELECTRONIC DISPLAY of workpiece thickness-  ...

Working width: 950 mmNumber of sanding units: 1 st.Workpiece thickness max.: 160 mmsanding belt measurements: 970 x 2150 mmFeed motor: 0,55 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mmNumber of sanding units: 2 st.Workpiece thickness max.: 160 mmsanding belt measurements: 1370 x 2150 mmFeed motor: 0,75 PSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.