670 grinding machines wood used for sale

Manufacturer: DMC, Type: Topsand, Monting of the machine: Walze/Walze/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Steel roller: 1, Shore roller 2: 70, Längsschleifaggregate: ca.30, Belt 2 shoe unit: 22, Belt 2 synchronous and reverse run: 17, Combi unit roller/shoe: 5-25, Table hight adjustment by engine: ca.2, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Vacuum table: yes,

Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994

Manufacturer: Arminius, Type: ST 2, Year: 1991, Control: Hand, Table length: 2000, Work piece hight min-max mm: 10-60, Feeding speed min-max m/min: 5-25, Controllable slewable: yes, Number of sanding units: 2, 1st sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, 2nd sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, Power kW: 1,1, Power kW: 1,1, Control panel at bottom: yes, Hight adjustment by hand wheel: yes, Year :1991

Manufacturer: Evimatic, Type: HF 82 CB, Year: 2000, Control: yes, Control: yes, Work piece width min-max mm: min. 200, Schleifaggregate rechts : 2, Unit 1 tiltable: yes, Aggregat 1 kW: ca. 1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Number of frequency controlt belts: 2, Brushing unit: 1, Total lenght mm: 2500, Year :2000

Manufacturer: Johannsen, Type: Langbandschleifer, Year: 1992, Table width mm: 800, Table length: 2799, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 350, 2 rotary directions: yes, Exhaust diameter mm: 140, Hight adjustment by engine: yes, Year :1992

Manufacturer: Johannsen, Type: T 94, Year: 1993, Sanding hight mm: 350, Table width mm: 800, Table length: 2700, Hight adjustment by engine: yes, Sanding belt engine kW: 4, 2 rotary directions: yes, Exhaust diameter mm: 120, Hight adjustment by engine: yes, Year :1993

NTS 201 Wet Grinder Whetstone diameter 200 mm Whetstone width 40mm Pull-off wheel width 30mm Pull-off wheel diameter 200mm Speed 115 rpm LxWxH: 480 x 340 x 375mm 0.15kW 230V 50Hz Weight 9.2kg G&STÜ-5750201

NTS 256 Wet Grinder Whetstone diameter 250mm Sharpening stone width50mm Pull-off wheel diameter 200mm Speed 90 – 160min ̄¹ Weight (net) approx. 14.2kg Input power 0.15kW S1 Connection voltage 230V Mains frequency 50Hz SCOPE OF DELIVERY Water tank Peeling paste Angle gauge Universal grinding device G&STÜ-5750256

internal diameter: min / max: 10 / 250 mmgrinding depth: 400 mmexternal diameter: max. 380 mmswing dia.: 390 mmtable:: table travel: max. 550 mmstroke of the table: min. 2 mmrapid traverse: 10 m/mintable speed -stepless-: 0 - 10 m/minrough adjustment: 18 mmfine adjustment: 4 mmmax. workpiece weight: 100 kgWorkhead.: spindle head: B 6 DIN 55021spindle turning speed - stepless: 15 - 1.500 U/minpivoting angle: +/- 30 Gradspindle bore: 50 mmpower capacity: 2 kWinternal grinding:: rapid traverse: 0 - 250 mm/minstroke: 70 mmpower requirement: 3 kWtotal power requirement: kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 3,0 x 3,0 x 3,2 mDocuments: exhaust fan: Fibaron paper band filter: Polo Fire extinguish system: Deugra Internal Grinding MachineBAHMÜLLER - JES 12The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

400 V, 50 Hz, 5 A, 2.2 Kw, H 1380 mm, W 1000 mm, L 2510 mm, 330 kg, Belt speed 28 m/s, Table 700x2200 mm, Abrasive belt 6000x150, Height adjustment 540 mm, Extraction connection 120 mm, Vacuum 550 Pa, volume flow 815 m³/h

Wide belt grinding machine Boere Elite 1300 BK Grinding width max. 1300mm Grinding calibration roller from below

Wide belt grinding machine OTT RS-O Grinding width: 1300mm Calibration roller + fine sanding + cleaning brush

Wide belt sanding machine for wood, veneer and varnish Ernst LBK 1300 Grinding width: 1300mm Transverse grinding unit Longitudinal grinding unit

- Producer Venjakob - Working width 1300 mm - Max. part height ~ 30 - 150 mm - With ionisation half-coil on top - Zur Montage auf einen Transport oder Schleifmaschine - ohne Schaltschrank - Connecting piece 2 x 180 mm - Total connection power Höhenverstellung 0,09KW, Bürstenantrieb 0,75 kW - Voltage / HZ 400 / 50 - Location - Spannungsschwankungen max. +/- 5 %

width of the strips: 75 mmband length: 2000 mmband speed: 37 m/mintotal power requirement: 3 kWweight of the machine ca.: 0,084 tdimensions of the machine ca.: 1x0,5x1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power connection 380V 7.3kW Extraction 1x120 mm 1x180 mm Grinding table 2850 x 1550 mm Sanding belt dimensions 7820 x 150 mm Table height adjustment via handwheel LxDxH: 4400 x 1700 x 1450 mm Weight approx. 1100 kg

Strip sanding machine for wood, metal and plastic. max. workpiece height 100 mm max. workpiece width 150 mm Machine dimensions 3020 x 950 x 1415 mm Weight approx. 900 kg Continuous flow speed from 0.5 - 50 m/min 3 workstations with 6 machining spindle The machine is in very good condition. Most recently, stainless steel rails and tile profiles were sanded with it.

width of the strips: 75 mmband length: 2000 mmband speed: 37 m/mintotal power requirement: 3 kWweight of the machine ca.: 0,11 tdimensions of the machine ca.: 1x0,5x1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1100 mm, 1 , 150 mm

Combination grinding unit with contact roller and air grinding shoe Brush roller Abrasive belt tension, pneumatic motor strength adjustment Specifications: max. working width 1100 mm Max. workpiece thickness 150 mm Min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power grinding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0kW Operating pressure 6 bar Air pressure approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Cntaou7R Machine depth approx. 1700 mm Machine height approx. 1900 mm

Key data: 110 mm, 1 , 160 mm

Specifications: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec. Feed speeds: 4 + 8 m/min. Motor power grinding agregate: 11 kW, power adjustment: 0.55 kW, feed carpet: 1.3/1.8 kW Operating pressure: 6 bar, Air requirement: 10 l/min., Suction nozzle: 1 x 150 + 1 x 120 mm WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding shoe with automatic insertion and removal - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by the grinding unit - Automatic centering of the feed carpet - Extension carpet with high quality rubber circular hole carpet and auto. Carpet centering - Pneumatic sanding belt tension with length compensation - Non-contact abrasive belt oscillation, electronic - Low ...

Key data: 1350 mm, 3

electronic control - First roller D=250 mm made of grooved steel - Second roller D=320 mm made of rubber - third roller D=? mm made of steel with carpet with button - Pneumatic on/off of the 3 groups - Air purification fan on the 3 bands - Sanding belt 2620 mm - Electronic oscillation of the abrasive belts - Automatic layer positioner - Variable feed speed of the carpet with inverter KW 2.2 - Vacuum conveyor belt - ionization in the outlet

grinding length: 600 mmgrinding width: 400 mmworkpiece height: mmtotal power requirement: 11 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 1 st.sanding width: 150 mmSanding height max.: 150 mmLoewer edge finishing machine MiniSpin NMachines for finishing and fine sanding ofEdges and profiles with a grinding spindlehorizontal or vertical.Motor 0,75 KWSpindle in vertical position for machining edgesPivoted spindle in horizontal position, laterallyetc. for processing longer profile bars orConjunction with a combined grinding head for grindingof edges with a grinding disc bladesGrinding head swiveling + / - 20 ° for editingoblique linesWorking height / width 150 mmmax. Diameter roller / brush

grinding length: 600 mmgrinding width: 300 mmworkpiece height: mmtotal power requirement: kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 2,9 x 2,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weibert R455B Wide belt grinding machine Motor 2.2kW 400V 50Hz Feed motor 130W Feed speed 1.8-6.7 m/min infinitely variable Speed 1420 rpm Roller diameter 82mm Roller length 407mm max. sanding width 457mm min. workpiece thickness 6mm max. workpiece thickness 127mm Sanding belt speed 25.3 m/s Abrasive belt 457 x 1010mm Suction nozzle 100mm Dimensions LxWxH: 960 x 740 x 1550mm Weight 215kg G&HM-R455B-400V

ZSM 500 Wide belt grinding machine Grinding width 400 mm Year of construction 2012 Weight 100kg Motor 1.1kW 400V 50Hz G&-5110-M3XQX