Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) used for sale (283)

New lathe. Distance between centers: 2200mm. Swing: 500mm. Swing over carriage: 330mm. Swing in gap: 690mm. Spindle hole: 52mm. Speeds: 18. (25-2000rpm). Dimensions: 3700x1000mm. Weight: 1750Kgs. Equipped with chuck and steady rest.

turning diameter over bed: 1250 mmturning diameter over slide rest: 1250 mmturning length: 9000 mmfaceplate: 1300 mm3-jaw chuck: 500 mmcentre distance: 10.000 mmbed width: 850 mmturning dia. in gap: 1600 mmsteady: 810 mmsteady: 410 mmsteady: 470 mmtotal power requirement: 54 kWweight of the machine ca.: 33 tdimensions of the machine ca.: mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwar ...

New lathe. Distance between centers: 800mm. Swing: 350mm. Swing over carriage: 200mm. Spindle hole: 46mm. Speeds: 18. (31,5-2500rpm). Power: 4hp. Dimensions: 2050x1000mm. Weight: 1100Kgs. Equipped with chuck and steady rest.

turning diameter over bed: 455 mmturning diameter over slide rest: 285 mmturning length: 1.000 mmcenter height over bed: 225 mmcentre distance: 1.000 mmdigital readout: 2-Achsen ANILAMbed width: 330 mmspindle taper: KK 6 DIN 55027spindle bore: 45 mmturning speed range: 16 - 1.000 U/minpower requirement: 3,0 / 4,2 kWtaper in tailstock-quill: MK 4 dia. of quill: 62 mmquill stroke: 145 mmcoolant: voltage: 400 Vtotal power requirement: 4,5 kWweight of the machine ca.: 1,95 tdimensions of the machine ca.: 2,45 x 1,10 x 1,80 m- Serial-No.: 29-2561- ANILAM 2-axis digital readout- 4-jaw tool holder- coolant equipmentATTENTION!Machine is sold without a chuck.Upon request and for an additional charge,the following 3-jaw spiral chuckscan be included:- CENTER Ø 200 mm = 780.00 EUR- CENTER Ø 250 mm = 1,030.00 EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

turning diameter over bed: 540 mmturning diameter over slide rest: 270 mmturning length: 2500 mmspindle passage: 60 mmturning speeds: 600 U/minRapid travel: steady for max. workpiece diameter from: 270 mmsteady for max. workpiece diameter from: 170 mmfaceplate: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 47No. 171The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to yo ...

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

turning diameter over bed: 600 mmturning diameter over slide rest: 360 mmturning length: 2250 mmspindle bore: 63 mmfaceplate: 500 mmturning speeds: 11,2-2000 U/minbed width: 350 mm3-jaw chuck: 300 mmsteady: 160 mmRapid travel: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this a ...

turning diameter over bed: 820 mmturning diameter over slide rest: 600 mmturning length: 5000 mmfaceplate: 750 mmspindle passage: 125 mmturning speeds: 9-450 U/minRapid travel: steady for max. workpiece diameter from: 520 mmsteady for max. workpiece diameter from: 330 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 59The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to you ...

turning diameter over bed: 520 mmturning diameter over slide rest: 340 mmturning length: 1000 mmspindle bore: 55 mmfaceplate: 400 mmturning speeds: 33,5-1600 U/mindigital readout: Haidenhain bed width: 340 mm3-jaw chuck: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 68The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for t ...

turning diameter over bed: 440 mmturning diameter over slide rest: 240 mmturning length: 1000 mmspindle bore: 55 mmfaceplate: 400 mmturning speeds: 18-1600 U/mindigital readout: Haidenhain bed width: 340 mm3-jaw chuck: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 65The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for thi ...

turning diameter over bed: 460 mmturning diameter over slide rest: 290 mmturning length: 1000 mmspindle bore: 55 mmfaceplate: 400 mmturning speeds: 50-1250 U/mindigital readout: Haidenhain bed width: 340 mm3-jaw chuck: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 64The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for thi ...

: . centre distance: 3000 mmmax. swing diameter: 660 mmmultifix: ja steady: 2 Stück weight of the machine ca.: 5 tlength: 5,80 mmwidth: 2 mheight: 1600 mmcentre height: ca 290 mmcirculating through support: 370mm : KW 39/2022 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gefült mit 43 Aufnahmen height: 2.200 mmwidth: 1.200 mmweight of the machine ca.: 300 kg: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mmturning diameter: 330 mmturning dia. over face-slide: 198 mmturning dia. in gap: 476 mmspindle bore: 38.0 mmturning speeds: 70 - 2000 U/minbed width: 180 mmspindle taper: DIN ISO 702-2 Nr. 4taper in tailstock: 3 MKquill travel: 110 mmtotal power requirement: 1.5 kWweight of the machine ca.: ca. 610 kg.range L-W-H: 1930 x 755 x 1300 mmFeatures- Ideal for technical schools, repair shops, and training workshops- Modern main spindle bearing assembly with precision-grade angular contact ball bearings- Single-lever chuck for the tailstock, adjustable for taper turning- Hardened and ground gears and shafts in the gearhead- Optimally suited for machining steel, non-ferrous materials, and plastics- Removable bridge for machining workpieces with large. diameters- To minimize the effects of vibration, the solid prismatic bed. is additionally equipped with ribs- The speed and  ...

: Aufnahmen Divers K50 Diameter: 50 mm: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 800 mmturning diameter over bed: 330 mmturning diameter over slide rest: 170 mmturning speed range: 24 - 1900 U/minspindle bore: 38.0 mmcentre height: 165 mmtotal power requirement: 3.5 kWweight of the machine ca.: 850 kg.dimensions of the machine ca.: 1850 x 800 x 1700 mm from a vocational school - in good condition () particularly suitable for medium-precision turned parts- in checked conditions - machinenvideo - https://www.youtube.com/watch?v=GDoJ0Z7DckwFeatures:- Robust lead/feed screw lathe- HEIDENHAIN 3-axis digital display VRZ 770”- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- TRIPAN steel holder with 3x inserts- Sliding tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- EMERGENCY stop button- Operating ...

turning length: 1000 mmturning diameter: 210 mmswing diameter over bed slide: 300 mmcentre height: 167 mmspindle bore: 40 mmbed width: 210 mmturning speeds: 40 - 2500 U/mintotal power requirement: - kWweight of the machine ca.: 1000 kg.range L-W-H: 2000 x 1000 x 1700 mmFeatures:- Digital display- 3-jaw chuck- Chuck guard- Multifix quick-change tool holder- Chip deflector- Chuck guard- Coolant system- Bed stop- Instruction manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck ...

turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck- ...

turning diameter: 360 mmturning length: 1000 mmswing diameter over bed slide: 360 mmcentre height: 180 mmturning speeds: 70-2400 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 680 kgdimensions of the machine ca.: 2000x1500x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features:- Robust lead/feed screw lathe- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- MULTIFIX steel holder A, with 3x new inserts- Movable tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- Emergency stop button- Operating instructionsThe data for this ad was created with M ...

: 0330 mm: 210 mm: 1000 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 350 mmturning diameter over slide rest: 216 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 40 - 1800 U/mincentre height: 170 mmspindle bore: 40 mmtotal power requirement: 4,0 KWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 2,0 x 0,85 x 1,6 mCentre lathe (lead screw and feed rod)- Digital readout- 3-jaw chuck (160 mm)- Spare jaws- Coolant system- Multifix tool post- 4 Multifix tool holders- Steady rest- Live centre- Chip tray- Chuck guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 600 mmturning speeds: 22 - 1500 U/mincentre height: 230 mmspindle bore: mmtotal power requirement: 6,5 KWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 mCentre lathe- Forkardt F200 3-jaw chuck- Multifix quick-change tool post- Steady rest- Chip tray- Tailstock centreThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 480 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: - mmturning speeds: 90 - 1120 U/mincentre height: 240 mmspindle bore: 52 mmtotal power requirement: 7,5 KWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 3,0 x 1,3 x 1,5 mEngine Lathe- 3-jaw chuck (200 mm)- Quick-change tool post- Steady rest- Machine lamp- Chip tray- Center pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mmturning diameter over slide rest: 330 mmturning diameter in the gap: 600 mmturning length: 3000 mmbed width: 505 mmspindle bore: 72 mmspindle head: DIN 55022 Gr. 8taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/minpower requirement: 18,5 kWdimensions: 5,3 x 1,75 x 1,53 mweight of the machine ca.: 5,2 tused lathe in nice condition with digital scale- 2 axis digital scale- 4 jaw chuck Ø 250 mm- 3 jaw chuck Ø 260 mm- Multifix C toolholder system- some toolholders- steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 390 mmturning diameter over slide rest: 190 mmturning length: 1000 mmturning dia. in gap: 460 mmspindle head: DIN 55026 Gr. 6spindle bore: 52 mmturning speed range: 11,2 - 2240 U/minpower requirement: 7,5 kWbed width: 355 mmdimensions: 2,8 x 1,3 x 1,6 mweight of the machine ca.: 1,9 tEquipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: mmturning diameter over slide rest: mmturning length: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0560 mm: 390 mm: 2000 mm: 280 mm: 80 mm: 11,25 kWspindle turning speed - stepless: 20-2000 U/minspindle taper: K 8 DIN 55027 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 2,25/3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 340 mmturning diameter over slide rest: 177 mmturning length: 630 mmspindle turning speed - stepless: 55-3000 U/minweight of the machine ca.: 1.55 tdimensions of the machine ca.: 2 x 1 x 1.6 mDigital read-out HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 297 mmturning diameter over bed slide: 160 turning length: 500 mmshort taper holder: Größe 5 spindle bore: 36 mmspindle turning speed range: 30-3550 U/minnumber of speeds: 18 quill adjustment: 90 mmtailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mmtotal power requirement: kWweight of the machine ca.: 610 kgdimensions of the machine ca.: 1,4 x 0,7 x 1,2 mwedge bar chuck Forkardt: Ø 160 mmAccessories:Forkardt V-block chuck, Ø 160 mmCollet chuck,Collets,Steel Multifix system, size Awith 3 quick-change insertsIntegrated center pointChip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 350 mmswing diameter over face slide: 200 mmcentre distance: 800 mmcentre height: 175 mmturning length: 700 mm3-jaw chuck: Röhm Ø 160 spindle bore: 46 mmspindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/mintailstock quill taper MT: 3 weight of the machine ca.: 1000 kg3-axis digital readoutmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 370 mm: 3000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 570 mmturning speeds: 45 - 1800 U/mincentre height: 210 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 3,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,6 x 1,1 x 1,7 mProfessional industrial machinedigital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotatingMultifix steel holder.Machine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mmturning diameter over slide rest: 170 mmturning length: 600 mmweight of the machine ca.: 400 kgspindle passage: 26 mmspeeds: 55-2000 U/mintotal power requirement: 1,4 kWdimensions of the machine ca.: 1,5 x 0,8x 1,3 mIncluding EMCO SOD grinding supportIncluding EMCO 4-jaw chuckIncluding machine feetIncluding change gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWspindle turning speed - stepless: 30-3000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 430 mmturning diameter over slide rest: 230 mmturning length: 1000 mmcentre height: 215 mmcentre distance: 1000 mmspindle bore: 56 mmspindle turning speed range: 19 - 2000 U/mintotal power requirement: 7,5 kWweight of the machine ca.: 1,9 tdimensions of machine L x W x H: 2,78 x 1,25 x 1,40 mAccessories: 3-jaw chuck 250 mmø, 4-pos. tool post, solid steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 220 mmturning length: 1000 mmcentre height: 205 mm: mmspindle bore: 46 mmspindle turning speed range: 40 - 2000 U/mintotal power requirement: 22,0 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,42 x 1,3 x 1,55 mmLathes with:- Copying attachment- Forkardt 3-jaw chuck F250- Multifix tool post- Coolant system- Machine light- Chuck guard- Chip tray- Chip guard wall- Foot brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 540 mmswing diameter over face slide: 370 mmcentre distance: 3000 mmcentre height: 270 mmturning dia. in gap: 815 mmbed width: 344 mmspindle bore: 88 mmspindle diameter in front bearing: 133 mmspindle taper: 11 D1 Camlock turning speed range: 18-1400 U/minturning speeds: 16 3-jaw chuck: Röhm Ø 315 longitudinal feeds:: 0,06-1,0 mmface feeds: 0,03-0,5 mmmetric threading: 0,4-14 mminch threading: 2-72 G/1thread - module: 0,3-3,5 mmthread - DP: 8-60 Pitchtailstock quill diameter: 75 mmquill stroke: 230 mmtaper of tail spindle: MK 5 slide valve travel: 280 mmupper head travel: 150 mmOverall size: ca. 4700 x 1100 x 1400 mmweight: ca. 3200 kgpower capacity: 9,4 kWAccessories:3-axis digital display FagorRöhm wedge bar chuck Ø 315 mmMultifix steel holder size Cincl. 6 interchangeable cassettesRotating center pointTurning chuck guardRear chip guardCoolant deviceWor ...

turning diameter over bed: 400 - 900 mmturning diameter over slide rest: ? mmturning length: 1000 - 1500 mmtotal power requirement: ? kWweight of the machine ca.: tdimensions of the machine ca.: mFree at short notice due to current company resolutionIn use until the endUntested, wear and tear due to age and useMachine package 5 x lathe2 x CAZENEUVE HB 5001 x WEISSER Junior1 x SCHAERER UD 630 x 15001 x ERNAULT SOMUA HN 500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mmturning diameter over slide rest: 280 mmturning length: 1000 mmcentre height: 230 mm: 720 mmspindle bore: 53 mmspindle turning speed range: 28 - 1250 U/mintotal power requirement: 4,0 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,4 x 1,4 x 1,75 mmLathes with:- Digital display- Quick-release tool post- 3-jaw chucks (200 mm and 160 mm)- Chip tray- Centering centerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 370 mmturning diameter over slide rest: 200 mmturning length: 1000 mmcentre height: 185 mmspindle bore: 56 mmtailstock quill taper MT: 4 turning speeds: 50 - 2000 U/minpower capacity: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,3 x 1,1 x 1,3 mCenter lathe200mm three-jaw chuckSize B Multifix tool post3 Multifix tool holdersEmergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 810 mmswing diameter over face slide: 560 mmcentre distance: 2000 mmbed width: 480 mmslide valve travel: 400 mmupper head travel: 180 mmturning tool - shaft cross cut: 32 x 25 mmpower capacity: 22 kWmax. torque on the spindle: 3200 Nmspindle head: Gr. 11, DIN 55027 spindle diameter in front bearing: 152,4 mmspindle bore: 106 mmturning speed range: 9 - 1800 U/minturning speeds: 24 longitudinal feeds:: 0,092 - 41 mm/Uface feeds: 0,046 - 20 mm/Umetric threading: 0,5-112 mminch threading: 1/4 - 56 G/1thread - module: 0,125 - 28 mmthread - DP: 1 - 224 Pitchtailstock quill diameter: 115 mmquill stroke: 225 mmtaper of tail spindle: MK 6 max. workpiece weight between centres: 2000 kgmax. workpiece weight -without tailstock: 750 kg3-jaw chuck: Röhm, Ø Overall size: ca. 4600x1900x1600 mmweight: ca. 4300 kgNumber of feed stages and threads: 99Accessories:3-axis digita ...

: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mmturning diameter over slide rest: 320 mmturning length: 2100 mmcentre height: 250 mm: mmspindle bore: 60 mmspindle turning speed range: 11 - 2000 U/mintotal power requirement: 7,0 kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 4,3 x 1,2 x 1,3 mmLathes with:- 4-position tool post- 3-jaw chuck 315mm- Centering pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 800 mmturning diameter over slide rest: 540 mmturning length: 4000 mmcentre height: 400 mmcentre distance: 4000 mmspindle turning speed range: 9 - 1140 U/minweight of the machine ca.: 8,0 t- with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mmturning length: 1250 mmcentre height: 230 mmcentre distance: 1250 mmspindle turning speed range: 35 - 1800 U/minweight of the machine ca.: 2,7 tAccessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.