breadmaking and confectionery machines used for sale (3,708)

Manufacturer: KEMPER Drives/motors: HEW Herford + ABM Greiffenberger Main Engine Type: RR 160L/84 S Country of manufacture: West Germany (Germany) — a machine probably from the 80s/90s. Type: spiral bakery kneader with fixed bowl Controls: 2 speeds Automatic cycle Timer emergency STOP

4 x Heuft VTR oven All ovens for 2 trolleys 10 tier trays 60x80 Furnace after general overhaul in 2026 Furnace with separate exhaust hood including display with digital control There are 2 rack trolleys per oven each stove is for 2 rack trolleys crosswise with 10 supports 60x80 cm optionally, additional rack trolleys can be purchased I oferiere ofen: With boiler possible 2 boilers in tandem with mounting me all containers With pipes insulation With transport

Doppler and scattering station Task: Round-rolled pieces of dough should be doubled and then sprinkled Solution: The round-rolled pieces of dough are fed by a roller flattened and then run through a Immersion bath. After the immersion bath, the first piece tilted by 180°, the next one is tilted to the first Piece tipped on it. After that, the two pieces drive and are sprinkled from above. After sprinkling, another printing roller follows, which, on the one hand, attach the pieces of dough to each other and on the other hand, the sprinkling presses on the dough. Description: Flattening: Full-surface tape with above, height-adjustable roller. Roller driven. Humidification: Water bath with adjustable diving depth.

Stacker - Belt width 900mm, - Separate frame, with sprinkling or Head machine connected by quick-release fastener - Mobile version - Setting stroke adjustable, suitable for 1 Trays 980 x 580 (occupancy: 10 x 6) ,2 proofing planks 45x65 (occupancy 3 x 5) or 1 tray 58x78 landscape (Beleguing 6x2 Doppelweck) - Detection of the dough pieces via light barrier - User-friendly control cabinet above the Attachment - User interface. Touch Screen - Incl. frame for paper support - Working direction: from left to right

Dough scoop with riser belt also possible for tubing • Dough funnel suitable for approx. 200kg dough • Funnel made entirely of plastic • Top edge hopper approx. 2050mm; Safety light curtains on top of the hopper. Attention: the lifting tipper should be set to at least 2,100mm dump! • Star knife for portioning the dough into Plastic • Oiling of the star knives: incl. • Oil tank: 19 liter stainless steel pressure tank, suitable in order to possibly add funnel lubrication afterwards. supply. • Funnel lubrication can be retrofitted • Horizontal pick-up belt for the dough portions • The dough is divided between two parallel Conveyor belts handed over • Climbing angle of the conveyor belts approx. 70° • The upper band can be moved at a distance to the inlet and run. • The lower band merges into a horizontal piece of ribbon, which leads the dough  ...

Used roasting/baking oven from Food Design Applications – Ireland Model: MSOG/2-100/800 Burners: Lanemark International Heating power: two burners: 2x 170kW = 340kW It is possible to connect steam. It can also work as a cooler, dehumidifier Two independent zones Electric blow height adjustment Electric blowing force adjustment Electric belt speed control Direct wash possible Indirect heat distribution system (tubular heat exchanger) Lower waste tray Stainless Tape, Braided with Belt Tensioning System Complete stainless steel chimneys, including exhaust gas control fans Natural gas Dimensions: Chamber (tunnel) height (adjustable) max. 250mm Tape width 950mm Belt width – working space 920mm Length of the whole machine 10250mm Baking Length 8000mm Machine width 2030mm Height with motors 3250mm Acid-resistant design.

Bread slicer MHS 2015 year

Waffle Cup Making Machine There are 4 different machines available, for different cup dimensions. Model: BM-260 - Mocaccino Model: ВМ-200 - Latte/Cauccino Model: ВМ-120 - Americano Model: ВМ-80 - Espresso Steps for production: - Preparation of the dough for the waffle cups - Production of the wafer cups on a cup production line - Preparation of the chocolate mass (melting of the chocolate briquettes/drops and tempering) - Pour the chocolate into the cup and turn the cup over so that the chocolate residue runs out of the cup - Cooling of the cups of chocolate on the work tables - Packaging of finished products in bags Technical data: - Number of molds per matrix: 32 pieces - Volume cup : 80 / 120 / 200 / 260 ml - Capacity: 320 - 480 cups per hour - El. Power: 18 kW - Weight: 655 kg - Dimensions: (L х W х H): 1,080 x 800 x 1,440 mm

Used sharpener from Gami company type T400ES. New 2015. Pencil sharpener with a mesh for coating products with chocolate. The set also includes a vibrating table for pralines and a funnel for coating cookies with icing.

Efficient

batch furnace

2x Diosna SP 200 AD - mit 5 kessel - mit hebekipper Alle Maschine nach gülüngel überholung. Moglich verkauf separate maschinen. Moglich austauch mit andere alte maschine in abrechnung. Meh info auf frage mail oder WhatsApp

Used automatic dough batching machine type SPdc-1000. New 2001. Automatic dough batching set 3 head.

Glimek dosing station

Boku spiral mixer with 3 bowls. Mixer is damaged.

Used cooling table, dimensions: 2m x 1m

Used chocolate coating machine type OB-1 with type TECHO-1 cooling tunnel. Technical data of the coating machine: - length 1400 mm - width 1300 mm - height 1900 mm - length of infeed conveyor 1430 mm - width of infeed conveyor 990 mm - height of entry conveyor 900 mm Technical data of the cooling tunnel: Overall dimensions: - max. length 13000 mm - max. width 1150 mm - max. height 1580 mm - belt width 850 mm - height of conveyor belt from the ground 920 mm Technical and operational parameters: - conveyor belt speed infinitely adjustable from 0.671 to 0.922/min, - Electricity requirement: conveyor belt drive 1.1 kW, fans in coolers 4 x 50 = 0.2kW, blower fan motor 0.55 kW, conveyor belt adjustment mech. motor 0.12 kW Freon condensing unit + compressor motor 4 kW - it is adapted to be supplied with R12 freon

Used biscuit moulding machine with various shapes made by Elcal from Biała Rawska.

Used machine for crispy cakes, pressed from roller Saixin 250. Set mixer + roller machine + electric oven belt width 250 mm.

Used MAX DROP single head shortcake machine. IMPORTANT: the machine was equipped with a bar for lubricating the tops of the dough with fruit filling. Manufacturer HASBORG Rakszawa Poland Year of production 2007 CE mark MAXDROP is a technologically advanced, multifunctional and single-head machine designed for the production of cakes. The machine is adapted to work with steamed, shortcrust, coconut, meringue, sponge cake or muffins with pieces of fruit. Its purpose is to dispense many types of cakes, such as single-color cakes, meringue, spice cakes, coconut cakes, dumplings, matzahs or puff straw and sponge cake tops. MAXDROP is equipped with a head that allows working with semi-liquid and hard cakes. Special rollers, which have milled notches, are mounted in the head. The speed of the rollers is adjustable. Part of the standard equipment of the machine is a bar with rotatin ...

Used machine for production of shortbread cookies with filling model MAX DROP CNC DUO Manufacturer HASBORG Rakszawa Poland Year of production 2009 CE mark Installed power: 2 kW power supply: 3 x 400V two-head - head 1 = two rollers, shortcrust / gingerbread / sponge-fatty pastry - head 2 = two rollers, mobile station attached optionally, fruit fillings, cream fillings, sprinkles 9 nozzles for exchange of dozens of tips squeeze cakes (plus with lowering) curly extruded cookies (plus with lowering) curly cookies curly cookies with lowering, filled cookies long cookies continuous pouring optional: string cut cookies With this compact machine, a very wide range of different pastries can be produced, including filled pastries in the center. The MAX DROP CNC DUO is equipped with two tanks for dough (e.g., two colors) or dough and filling. It includes a bar with  ...

Used KRUMBEIN TKSM vertical slicing machine. Year of manufacture 2017. Length 1500 mm Width 1390 mm Height 1940 mm Weight 275 kg Max. product size 600 x 600 mm Electricity 230/400 V 50 Hz 3 Ph Power consumption 0.8 kW Voltage 24V DC Description: Within each program, we can freely set a number of parameters such as product diameter and height, slicing speed (in the initial, middle and final phases separately), knife exit speed from the product, knife temperature, slicing depth (complete cut or shallow cut only), knife cleaning frequency. The change of the working system from slicing round to lengthwise products is done manually Performance depends on the type of products to be sliced, their structure and temperature, and the number of portions. Double blade system for gentle and precise cutting. Heated blade. Quick return on investment due to minimal human labo ...

Flat wafer oven CHSW64-58 Made in the Czech Republic Price € 40,000 Year of construction approx. 2000 Location: Poland - Number of baking plates: 58 - Panel size: 460 mm x 290 mm - Blade thickness: 5.1 mm Only the baking machine without any additional accessories is sold. Haas / Hebenstreit

Flat wafer machine HAAS SWAK Price € 90,000 Year of construction approx. 1996 Location: Poland - Number of baking plates: 72 - Engraving: Tiefcarre - Panel size: 460 mm x 290 mm - Blade thickness: 5.1 mm Only the baking machine without any additional accessories is sold. Haas / Hebenstreit

Stock# UG6367 Used stainless steel contact parts planetary mixer by Tonelli, Universal Model P300 (IT). Machine has two agitators and is equipped with three mobile stainless steel mixing pans, each with volume 300 l. Last time used in food industry.

Stock # UG6363 Used chocolate enrober line by Chocoma (Denmark) with a belt width of 320 mm. The construction of the line is made of stainless steel, aluminum and painted mild steel. The line consist of: - chocolate enrober machine type 2MP32, belt speed adjustable in the range of 0,45 - 1,75 m/min, - cooling tunnel type C + CS, belt speed adjustable in the range of 0,0 – 3,0 m/min, - tempering machine / jacketed mixing tank type 2T.

Diosna D 240a plus with 2 boilers Tipper Diosna HK 166 - after general overhaul

Device characteristics: Number of bars: 48 per minute. Hopper capacity: 7 litres. Weight: from 10 to 80 g ( depending on the stamp ). Dimensions ( L x W x H ): 500 x 400 x 650 mm. Total weight: 27 kg.

Planetary mixer Varimixer AR10 The AR series of beaters is the oldest by design and also the most durable series of beaters. The AR series is characterised by the fact that it has a mechanical belt transmission with simultaneous infinitely variable speed control.  The well-known robustness and powerful motor have been retained, and a number of characteristic features of the AR models have been improved without compromising the widely recognised quality. Technical data: Capacity: 10 litres, Adjustable speed: 53-294 rpm, Stainless steel mixing bowl, Stainless steel butterfly, Electrical power: 400 V - 0,37 kW. After general refurbishment. Call and arrange a demonstration of the machine!