28 HEUFT used machine for sale

Overview  The Heuft InLine TI 60 BFS2-r is an inspection system for empty PET bottles that was manufactured in 2006. With a maximum output of 36,000 bottles per hour, the machine is ideal for the efficient inspection and quality control of empty bottles in filling lines. The empty bottle inspector is equipped with several rejections and a wide range of accessories. Technical details  Output: Up to 36,000 bottles/hour Location: Germany Installation location: In front of the filler Immediately available Inspection functions  Bottom inspection: 1st bottom-IN-r Mouth inspection: Mouth-IN-r Side wall inspection: 1. sidewall-IN-r 2nd side wall IN-r Side wall with double resolution-r Support ring inspection: PET-r Abrasion inspection: RefPet Abrasion-r Ventslot inspection: RefPet Ventslot-r Stress crack detection: Stress Crack Detection-r Residual liquid detection: IR Rejection and adjustmen ...

Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty cont ...

Bottle level control, Current: up to 1,5 kW/power supply, Voltage: 220/110 V, Frequency: 50/60 Hz, Length: 420 mm, Width: 350 mm, Height: 720 mm

Overview This HEUFT Spectrum TX empty bottle inspector was manufactured in 2015 and is designed for the automatic quality inspection of empty glass bottles prior to the filling process. The machine belongs to the HEUFT Spectrum TX series, which uses the manufacturer’s reflexx inspection technology for high-precision bottle inspection. The system detects foreign particles, glass defects, and residual liquids inside bottles, ensuring that only compliant containers proceed to the filling stage. HEUFT inspection systems are widely used in modern beverage production lines due to their reliable optical inspection technology and modular design. The machine was installed in a high-capacity bottling line with a performance of approximately 33,000 bottles per hour, making it suitable for large industrial beverage filling operations. Technical Data Manufacturer: HEUFT Series: Spectrum TX Type: HB ...

Overview  This fill level inspection machine was manufactured in 2019 by German company HEUFT. It is designed for checking the fill height and closure of full bottles. The system is available immediately and still installed. A personal inspection is possible on site. Technical data Capacity: up to 72,000 bph Formats: 75 cl Inspection features: Fill level and cap control Scope of Delivery  Fill level inspection system | HEUFT | PRIME | 2019 Reject system | HEUFT | DELTA-FW | 2019 Bottle conveyor (10 meters)

Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)

Heuft Inspector for 0.5l Euro 0.5l Bracket 0.33l Longleg Bottle Machine can be scheduled by us and bottle run can be adjusted.

Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  Capacity: Up to 60,000 bottles per hour Formats: Supports 11 bottle formats From 0,3l - 0,66l Steini, NRW, Longneck Container types: Glass, not transparent, non-contoured Container diameter: 60.4 – 69.1 mm Container height: 174 – 270 mm Label positions: Front (up to 2 labels) Back (up to 1 label) Label size range: Width: 70 – 111 mm Height: 33 – 100 mm Band height: 1100 mm Max. ambient temperature: 40°C Power connection: 400 V Machine design: Straight version, size L (approx. 3360 mm wide) Bottle carousel diameter: 1610 mm Number of bottle pla ...

Overview  This empty bottle inspection machine was manufactured in 2012 by German company HEUFT. The Glas InLine reflexx IR is designed for quality control of empty glass bottles in high-speed filling lines. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It is described as in very good condition and available immediately. Technical data  Capacity: Up to 72,000 bph Formats: 330 ml Application: Empty glass bottle inspection Flow direction: Left to right Operating hours: 48,121 h

Empty Bottle Inspector Heuft InLine reflexx Release 9, Pre-sorting of the Heuft Spectrum SX TB 72 and the associated Gateway II (network connection) (output max. 72,000 bph; Built in 2009). The following types of bottles can currently be checked: • 0.33 l ale / green / KK • 0.33 l Ale / brown / KK • 0.50 l NRW / brown / KK • 0.50 l NRW / clear / SV • 0.50 l Euro / brown / KK • 0.33 l swing-top bottle / brown / embossing • 0.50 l swing-top bottle / brown The following checks are carried out: • Pre-sorting Heuft Spectrum SX TB 72: - Bottle shape - Bottle height • Empty bottle inspector Heuft InLine reflexx Release 9: - Sidewall inspection (inlet and outlet) - Muzzle inspection - Thread inspection - Soil inspection - Residual liquid (IR/HF) - Additional detection in the outlet for any sticking labels in the neck area - Test bottle detection T ...

An empty bottle inspection machine Heuft including a pre-sorting unit Heuft Spectrum SX TB 72 and Gateway II is available. Inspector: rated throughput: 72000bottles/h, bottle types: Ale/NRW/Euro/Krombacher swing top/swing top, bottle colors: green/brown/clear, closure types: crown cap/screw cap/embossing, bottle volume: 330ml/500ml, pre-sorting: bottle type/bottle height, inspection types: sidewall/finish/thread/base/residual liquid/labels/test bottles. Including defective bottle reject systems and infeed and outfeed conveyor. Documentation available. An on-site inspection is possible.

A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible.

used wagon furnace system with 2 x wagon furnace Heuft Vulkan Thermo-Roll VTR 10.19,0.09 and 1 x boiler Heuft HK 200, Fabr.-Nr. 13 C 582, with 3 trolleys 60 x 100 cm per oven, 9 shelves per trolley/oven, shelves each 18.5 cm high, with br. Weishaupt oil burner, external dimensions per oven: 170 cm wide, 325 cm deep, 260 cm high, outer dimensions kettle: 105 cm wide, 170 cm deep, 200 cm high, in baker's condition, ran perfectly until the end

Thermo Oil Trolley Oven Heuft VTR 08.19,0.09 - 2 Heuft trolley ovens - Model: VTR 08.19,0.09 - 3-fold deep ovens with 9 shelves - 3 rack trolleys fit each oven in a row - Automatic wagon retraction - With exhaust hood - Door hinge on the right - Year of construction 2003 - Optionally with boiler

Thermal Oil Boiler Heuft TH 1/Z A used thermal oil boiler Heuft TH1/Z with 116 kW power is currently available for sale in our warehouse. Thermal Oil Boiler Heuft - with gas burner - Heating capacity 116 kW -Ab. Operating overpressure 10 bar -Ab. Operating temperature 300 C - Minimum volume flow 6 - Operating voltage 400 V 50 Hz - Control voltage 230 V 24V - Connected load 4.6 kW - Rated current 8.5 A

Empty bottle inspector, make Heuft, type: Spectrum TX (HBBIRTI24), built 2006

ThermoRoll oven Heuft VTR 10.12,5.10 Thermo oil -Thermal oil ovens -Manufacturer: Karl Heuft GmbH - Type: VTR 10.12,5.10 -one oven is for 2 rack trolleys of 10 editions each -Sheet size 58x98cm -Furnaces with exhaust hood -Built in 1998

Floor oven Heuft BTO 21623 Thermal oil - Heuft shared oven - Model BTO 21623 - with 5 floors - of which 2 pull-out stoves - Floor width 120cm - Floor depth: 160cm - with exhaust hood including fan - Total baking area approx. 10sqm

Rack oven Heuft NPU Nonplusultra - for 60x80cm sheets - with exhaust air hood - with digital control - with gas burner - Door stop on the right - Year of construction 2009

Thermo oil boiler Heuft HK 140 Year: 2009 Thermal oil boiler Heuft HK 140 - with oil burner - Heating capacity 140 kW - zul. Operating overpressure 10 bar - zul. Operating temperature -10 / 300 C - Content volume 74 L - Minimum volume flow 6 - Operating voltage 400 V 50 Hz - Control voltage 230 V 24V - Connected load 5 kW -Year of construction 2009 Rated current 11 A

Thermal oil boiler Heuft HK 80 -with burner -Heating capacity : 80 kW -zul. Operating overpressure : 4 bar -zul. Operating temperature : 300 C -Content : 38,5 / 400 L -Minimum volume flow : 6 -Operating voltage : 400 Volt -Control voltage : 230 Volt -Connected load : 4.6 kW -Rated current 8.5 A -Year of construction 2002

PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Device No. 2SG021663 Built: / year of construction: 2006 Output[B/h]: / performance [cont./h]: 36,000 Flow direction of: / moving direction from: Direction: / rejection direction: Installation location: / installation site: In front of the filler • Basic unit: Empty bottle inspector • Inspection: 1.Soil-IN-r • Inspection: Estuary IN-r • Inspection: 1st sidewall IN-r • Inspection: 2nd sidewall IN-r • Inspection: SW double resolution-r • Inspection: Carrying ring/PET-r • Inspection: RefPet abrasion-r • Inspection: RefPet Ventslot-r • Inspection: Stress crack detection-r • Accessories Transport belt: Height adjustable • Residual fluid detection: IR • Height adjustment: for discharge • Cross-adjustment: for discharge • Discharge ...

Pull-off trolley with 9 cloth pull-off apperates suitable for Heuft VTR Thermo Roll / Daub RDTO Thermo Roll oven. The pullers can be used for ovens with 2 times deep sheet metal mass 80x60cm. With this pull-off appress and a stone slab trolley, they can also bake in the Thermöl wagon oven on stone served by a Man.Option we also have the stone slab cart for two times deep oven in the warehouse. with 9 pullers on rolls Stainless steel trolley Dimensions wagons: Height: 196 cm Width: 160 cm Depth: 90 cm

Filling height control in beverage bottles

Used Used Bottle Inspector Heuft inline reflexx 72.000 bph: Year: 2009 Condition: Good Used Bottle Inspector Heuft: Model: Inline reflexx release 9 HBBIRTIXX Year: 2009 Speed: 72.000 bph Camera inspection type ccd High-frequency and infrared sensors are used for the detection of liquid residues Type of control: Empty glass bottles Inspection of: ? Side walls (inlet and outlet) ? neck ? thread ? bottom Residual liquid detection (IR/HF) Additional exit recognition for any remaining labels in the package area Bottle Recognition Test PRESELECTION SYSTEM HEUFT Model: spectrum SX TB 72 Type: Bottle shape and height GENERAL DATA Machinery layout Safety protections Code: ZZ 48 More details: https://bottlingscout.com

Used Used Bottle inspector Heuft Reflexx GJ 25.000 bph: Year: 2004 Condition: Good Used Bottle inspector Heuft Reflexx GJ 25.000 bph: Model: REFLEXX GJ Year: 2004 Speed: 25.000 BPH Type of inspection: Cameras, infrared and High Frequency Type of control: ? Empty bottles Bottom, fillet, mouth e walls Safety protections Code: ZZ 47 More details: https://bottlingscout.com

1 of used level detector for bottles, make Heuft, type Basic HF-LT, new 2005. Over-/under-fill detection via high-frequency, optical closure and excessive closure height detection, "mono" pneumatic rejector, encoder. Rated at 22.000 bph.

Year of manufacture 2004 6 piece HEUFT VTR oven each oven with separate exhaust hood including display with digital control 2 rack are pro oven each oven is for 2 rack with 10 supports 60 x 80 cm Optionally you can buy to raetzliche rack to We have about 60 new rack with boiler with mounting with transport