558 boring mills, machining centers used for sale

This VITAP BLITZ 2.0 multi-spindle drilling machine was manufactured in 2023. It features a drilling head at 3500 rpm, three horizontal and vertical independent spindles, and a glue and dowels inserting unit. The machine is equipped with a 19 LCD TFT monitor, Windows PC system, and Albatros TPA software. Ideal for JUST IN TIME or mass production. Contact us for more information about this machine.

CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer "PC" must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If yo ...

Zangheri & Boschetti B23 K dowel drill with swivel head Masch. Ref. K 74590 21 spindles Weight 506 kg The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Drilling, dowel and milling centre Stegherr FD-E For efficient doweling of corner joints in windows and doors, doweling of transoms, setting timber and central friezes as well as milling out recesses for fittings and door locks. 4 controlled servo axes (X, Y, Z, NC-Stop) Positioning stop NC-Stop Stop extension NC-Stop to 3200 mm Lateral workpiece pressure unit on machine table Increase of clamping height to 140 mm Workpiece scanning horizontally Vertical workpiece scanning Workpiece Length Measurement Horizontal milling unit: 3.5 kW, up to 15000 rpm, Vertical milling unit: 2.4 kW, up to 15000 rpm Drilling unit for one dowel drill bit at a time Drilling unit for one drill bit at a time D6 mm (Safety Signs) Drilling unit for holding multiple drill heads (Griffolive) Drilling unit for holding multiple drill heads (cup belt) Pneum. Swivel device for 2 pos. Extensi ...

Continuous drilling rig Biesse Techno Logic Masch. No 873/90 Position 1: Loader BIESSE-TECHNO LOGIC Item 2: Transfer BIESSE-TECHNO LOGIC Item 3: Transfer BIESSE-TECHNO LOGIC Item 5: Continuous drilling machine BIESSE-TECHNO LOGIC Item 6: BIESSE-TECHNO LOGIC horizontal continuous drilling rig Item 7: Transfer BIESSE-TECHNO LOGIC Item 8: Transfer BIESSE-TECHNO LOGIC Position 9: Brushing machine BIESSE-TECHNO LOGIC Item 10: Unloader BIESSE-TECHNO LOGIC Weight approx. 4 to L x W x H: 6.0 x 2.4 x 2.5 m Year of construction 1990 Dismantling by buyer The plant is in good condition, ready for operation Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Fitting drilling machine Grass BBM-R with substructure with stop L x W x H: 2.5 x 1.0 x 1.8 m Weight approx. 350 kg Year of construction 1992 The machine is in very good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Fitting drilling and press-in machine Blum Minipress MSP with attacks L x W x H: 1000 x 800 x 1700 mm Weight approx. 50 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine to the dowel, drill and saw the company EKM spezialmaschinen connection value: 4,4 kW 1 pneum. Workpiece clamping system 1 drill head with 5 spindles in row spacing 25 mm / 40 mm / 40 mm / 25 mm 4 piece glue - and plugs Tools 4 piece adjustable on width 220 mm Under table saw Control PLC Siemens Simatic Fully functional replacement for PLC program on CD,. Shipping dimensions: L 1500 mm x W 1500 mm x H 2400 mm Machine weight: 1000 kg Condition good, fully functional

BLUE MAX 8-FS cup belt drilling machine from HETTICH very good condition For precise drilling of many common furniture fittings and pot hinges from BLUM, HETTICH and other manufacturers the pneumatic clamps are operated by foot pedal and the drilling unit lowers to the set drilling depth Very stable, torsion-resistant construction with quick-change mounts for drills with an internal thread M10 Position adjustment 0- 70mm backwards (in depth) with a left and a right stop and a 400mm stop ruler on both sides (can be extended if necessary you can see the drilling pattern in the photos The machine table is 800mm wide was only used a little, very good condition with infinitely adjustable drilling depth stop Very compact and stable device for continuous use works perfectly very precise work is possible with the machine and hardly any adjustment work is necessary due to the ...

Dowel and slotted hole drilling machine GANNER GANNOMAT JUNIOR 323 very good condition, the machine is absolutely new, it comes from an educational institution, which was closed about 1 year after the machine was purchased the machine has max. 10 operating hours down this allows slotted holes to be milled and dowel holes to be drilled on 2 levels without reclamping 380V, 1500W 2800 rpm Year of manufacture 2005 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible time, which makes the m ...

Quills, processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. Feed: stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 2x quill machining units available -Price: per piece -Weight: 25 kg/piece

Fittings drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drills -Drill distance: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240kg

Wood step drills, wood drills, countersinks, end mills, drill holders, click quick-change chucks -for: Line drilling machine, fitting drilling machine -from: a wood workshop -15 kg: milling cutter, drill bit, countersink, click quick-change chuck

Row drilling machine, multi-spindle drilling machine -4 engines (1 engine defective) -pneumatically clamping -Drilling depth approx. 30 mm -Max. Drilling distance: 1000 mm -Drive: 0.36 kW 2800 rpm -Weight: 280kg

Multi-spindle head, multi-spindle drill head, dowel drill head, fitting drill head -Dimensions: 190/85/75 mm -Bore distance: 26 mm -Middle drill: 5 mm offset -Number: 1x drill heads available -Price: per piece -Weight: 2 kg/piece

hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: in the pictures -Dimensions: 4000/1100/H1800 mm

Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Bore head: Ø 12 mm -fixed, without feed -Number: 8x drill heads available -Price: per piece -Dimensions: 700/120/H150 mm -Weight: 11 kg/piece

Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Bore head: Ø 12 mm -fixed, without feed -Number: 3x drill heads available -Price: per piece -Dimensions: 470/120/H150 mm -Weight: 7 kg/piece

Grass hardware drill/dowel machine Tecmator RP Specifications: • Ideal for carpenters, interior fitters and small series manufacturers • Robust and practical design • Easy and problem-free change of the spindle head • Certified, type-tested design • Pneumatic two-hand control for fast, safe work • 6-spindle drill head for hinge, mounting plates and connecting fitting holes • Useful optional accessories offer extended processing options for furniture parts • Voltage 230 V Year of Make: 2022 Price: We ask for your binding offer. Available from: immediately Terms of delivery: ex location – EXW Berlin Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

1 well-maintained RD 1250 carpentry machine from HUNDEGGER, built at the end of 2019 did not go into operation until 2020, available as early as March / April 2026, ready for demonstration by appointment, sale ex site as seen without warranty.

This 3-axis QUICK CNC KQ-63E was manufactured in 2025. Its a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information.

Machine Dowel drills Type: Gannomat 120 Power: 1.1 KW Working range: Drilling stroke: 120 mm

Very well preserved WEEKE CNC machining center BP 155

Number of Spindles: 9; Drill pitch: 32mm; Power consumption: 2.2kW;