boring mills, machining centers used for sale (540)

C.M.S. CNC Turret Head Machining Center Model TRIAX R-65 Sn 285, 1986 IBH controller modus 1 (2) vacuum tables- each 48” deep x 60” long. (1) five station lathe section. Max. part 6.5” x 45” (2) vacuum pumps 5 hp. each. Total of (30) routers. (6) station turret with (5) routers per station. Consisting of; (2) stations of (5) routers each - 2 ½ hp. each. (4) stations of (5) routers each – 8 hp. each. Digitizing table for flat work or carving. Lathe section for spindle work (fluting, carving). Unit complete with extra parts and lots of tooling.

working length X: 1.600 mmworking length Y: 800 mmworking depth Z: 190 mmWorkpiece dimensions: mmWorkingpiece thickness from to: mmMotor output: 2,2 kWNumber of axles: St.Number of milling agregates: St.Number of heads vertical: St.Number of heads horizontal: St.Overall size: mmWeight: ca. 450 kgYear: 2018 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Can be dismantled by the customer up to metal extraction. Equipped with control computer and 2x metal closure 230 x 188cm, ergonomic rubber tiles. Auction-ID: A1-50226-2

Auction-ID: A1-50377-278

Multi-spindle woodworking boring machine with a worktable, adjustable guides and three pneumatic hold-down clamps mounted on an overhead beam. Equipped with a side adjustment handwheel and an electrical control box. Serial number: PZB000074. Electrical supply: 380 V, 50 Hz. Approximate weight: 750 kg. Made in Italy. Auction-ID: A1-50699-33

Multi-spindle woodworking boring machine with a worktable, adjustable guides and three pneumatic hold-down clamps mounted on an overhead beam. Equipped with a drilling head, adjustment handwheel and pneumatic hoses. Serial number: 440181. Electrical supply: 380 V, 50 Hz. Approximate weight: 770 kg. Made in Italy. Auction-ID: A1-50699-35

Multi-spindle woodworking boring machine with adjustable aluminium guides and two pneumatic hold-down clamps mounted on an overhead beam. Equipped with a pneumatic pressure regulator, pressure gauge, foot pedal and front-mounted controls with an emergency stop button. Year: 2003. Serial number: 300708. Electrical supply: 380 V, 50 Hz. Nominal current: 4.7 A. Made in Italy. Auction-ID: A1-50699-34

Auction-ID: A1-50699-49

Biesse Rover A3.30 CNC woodworking machining centre with Becker vacuum pump CNC woodworking machining centre with adjustable workpiece support beams and vacuum pods. Includes control cabinet with monitor, keyboard and mouse, separate pedestal control panel, foot controls, floor safety mats, safety fencing and machine-connected extraction hoses shown in the photographs. Visible dust accumulation and signs of wear. Included vacuum pump: - Brand: Becker - Type: PICCHIO 2200 - Year: 2007 - Serial number: 2157149 - Speed: 1,420 / 1,720 rpm - Motor power required: 1.8 / 2.5 kW - Inlet capacity: 90 / 108 m³/h - Vacuum: 130 / 130 mbar - Made in Germany Auction-ID: A1-50699-7

Maximum workpiece width: 450 mm Maximum workpiece thickness (height): 300 mm Maximum workpiece length: 13,500 mm (13.5 m) Equipment: Cylindrical cutter 350 mm x 120 mm End mill 160 mm x 40 mm - 2 pieces Circular saw blade diameter 700 mm 2 pieces Dovetail cutter mounted on the cylindrical cutter Dovetail cutter for end mill 100 mm x 30 mm end mill mounted on horizontal unit Loctc U E Heymz Uhezoaa Chain Grooving Unit Drilling units: 1 vertical, 1 horizontal Vertical ink marker at the machine outlet Auction-ID: A7-50825-1

Machine 1 – GENKO Radial Drilling Machine Manufacturer: GENKO Version: ATB 20 Machine No.: 75048 Radial/swivel arm drilling machine 8 spindle speeds Speed range: 450–4,500 rpm Speed levels: 450 / 650 / 950 / 1,250 / 1,600 / 2,100 / 3,000 / 4,500 rpm Engine speed: 1,400 rpm Horizontally movable drill head Height-adjustable working unit Drill chuck and manual spindle feed Machine substructure with drawers Machine 2 – KUPER horizontal drilling machine Manufacturer: Heinrich Kuper Horizontally arranged drilling spindle Manual workpiece/table adjustment Adjustment via handwheels and control lever Workpiece hold-down available Woodworking workbench Stationary casting machine version Auction-ID: A1-50370-8020

bore capacity in steel (diameter): . mmthroat: 285 mmbore stroke: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): mmNumber of spindle head vertical: St.Number of spindles head horizontal: St.Masterwood Project 455 CNC machining centrewith tools------------------------------------------------Technical specifications to follow------------------------------------------------Price of the above machine on enquiry!------------------------------------------------(Technical specifications as per the manufacturer – subject to change!)All prices quoted are net, plus statutory VAT.Translated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis: 3090 mm Y-axis: 2100 mm Z-axis: 85 mm Main spindle (3 axes): Powerful motor from 10 kW to 12 kW (depending on original options), rotation speed from 1,000 to 24,000 rpm. Tool clamping system: HSK-F63 taper. Tool magazine: 15-position linear automatic changer. Drilling head: DH 8 vertical drilling block (8 independent spindles) for drilling furniture or assembly lines. Auction-ID: A1-50215-102

Brand: BLUM Model/Reference: M51P1000 (Plate Reading) Type: MINIPRESS Year: 2000 Serial number: EA 03917 Use: drilling and mounting furniture fittings Suitable for drilling hinges, mounting plates and other fittings Pneumatic feeding/drilling on this machine family Power supply: 3 × 400 V Frequency: 50/60 Hz Amperage: 2.85 A Control circuit: 230 VAC Indicated weight: 37.8 kg CE marking Machine mounted on its equipment/work stand Several accessories and adjustment elements visible in the photos Contains 16 stops Defect: The 2 bars are missing to hold the stops Auction-ID: A3-46129-35226

Type: semi-automatic single-head multi-spindle drill Use: horizontal and vertical drilling of wood and solid wood panels Number of pins: 23 Distribution: 11 lefts + 12 rights Axle spacing: 32 mm Total centre distance: 704 mm Head orientation: pneumatically adjustable from 0 to 90° Maximum drilling depth: 65 mm Maximum Tool Diameter: 40mm Maximum panel thickness: 60 mm (up to 130 mm with option) Maximum panel dimensions: 960 × 3,000 mm Engine: 1.5 kW / 2 hp Engine speed: 2,800 rpm Pneumatic pressure: 6–8 bar Suction: Ø 80 mm connection Indicative dimensions: 1,285 × 872 × 1,300 mm Indicative net weight: 271 kg Equipped with 2 pneumatic pressers, side guides/rulers and positioning stops. Auction-ID: A3-46129-35225

The machine must be dismantled and loaded by the buyer himself. The transport device and loading are to be organized independently by the buyer. - Maximum workpiece size 5860 x 1300 - AP table - 2 vacuum pumps - Power Edge gluing unit - Power Control PC 85 - Chip conveyor belt with incline conveyor - Barcode reader Page 1 - Main spindle 18.5 KW with C-axis - Drill Head Vertical 17 Drill Bit (7in X / 11 in Y) / Horizontal 4 Drill Bit with Saw 0/90° - Plate changer 18 - Sawing and cross-cutting unit - Drilling and milling unit - Corner notching unit - Blow-off nozzle Page 2 - Main spindle 18.5 KW with C-axis - Drill Head Vertical 17 Drill Bit (7in X / 11 in Y) / Horizontal 4 Drill Bit with Saw 0/90° - Plate changer 18 - Sawing and cross-cutting unit - Drilling and milling unit - Corner notching unit - Blow-off nozzle main spindle 18.5 KW with C-axis - Hot air nozzle for gluing u ...

bore capacity in steel (diameter): . mmthroat: 368 mmbore stroke: . mmfeed: 0,1-6,18 m/mintable surface area: 560x470 mmThread-cutting deviceThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

equipped with ruler, 1 multi drill chuck, press device and other accessories Auction-ID: A1-50090-77

Equipped with pneumatic clamping Auction-ID: A1-50090-76

New and used milling cutters and drills. Various manufacturers Approx. 300-350 pieces The table is not part of the auction. Auction-ID: A7-50255-1

Machine: CNC machining center MASTERWOOD 4 WIN Year: 2010 Axle stroke: X 4960 mm, Y 1930 mm, Z 650 mm Digital axes: 4 + C-axis Electrospindle: 17 kW HSK63E with dimmer, dedicated cooling Tool magazines: 10 in. head, 16 in. rear carriage, 18 in. side Fixed heads: blade holder Ø220 + Ø350 mm HSK63F Table: 7 bar auto Belt: chip evacuation Control: Multilingual PC + Masterwindows software, mobile console, portable remote control Safety: CE Dimensions: 6800 x 2450 x 2450 mm Weight: 4300 kg Available from the beginning of November. Auction-ID: A1-50215-15

Machine: WEEKE OPTIMAT BHC 550 machining center Year: 2002 Axle stroke: X 3250 mm, Y 1350 mm, Z 370 mm Table: transom with 6 infinitely adjustable supports (X) Stops: 4 rear stops + 6 programmed front stops, 2 side stops (Y) on aluminium profile Vacuum pump: 100 m³/h Control: Programmable NC Auction-ID: A1-50215-8

STEMA MS Multi-Point Drilling MachinePanel capacities: L 50–600 mm, W 50–1300 mm, thickness 16–28 mm. Robust machine for precise drilling series, quick adjustment. Auction-ID: A1-50215-21

Machine: BIESSE CNC Machining Center Table: 3060 x 1260 x 150 mm Solenoid Spindle: 12 kW, ISO30 Cone Tool changer: 10 positions Vacuum pump: 100 m³/h Consoles: 6 with 3 ATS suction cups Drilling Head: 15 Vertical + 4 Horizontal Pins X Saw: Ø125 mm Accessories: 4-position flange, bevel gearbox, flange for aggregates Equipment: chip recovery belt, Biesse WORK software, B_NEST Auction-ID: A1-50215-11

Machine Type: TEK.2004F Serial Number: 99050024 Country of Origin: Italy Power: 10 kW Voltage: 380 V Frequency: 50 Hz Amperage: 19.9 A Maximum distance between the 2 external anuba plugs: 2,700 mm Maximum height with head positioned at 0°: 200 mm Maximum thickness with head positioned at 90°: 120 mm Drilling Engine: 1 HP Screwdriving motor: 1 HP X-axis speed: 40 m/min Y-axis speed: 7 m/min Z-axis speed: 7 m/min Overall dimensions: 3,550 x 2,623 x 2,200 mm Machine weight: 1,600 kg Weight of electrical panel: 145 kg Auction-ID: A1-50215-52

Usable working area:X: 4970 mmY: 1390 mmZ: 110 mmConfiguration:16-core drill headElectro-chuck 8 kW – ISO30Frequency inverter 8 kWSaw for longitudinal incisionsHorizontal milling unit with 1 output – 2.2 kW8-position tool magazine – ISO30 carriage edgeAdapter support plate for index headsTable: Work table with bars and suction cupsPneumatic locking table2 stops per bar8 × suction cups 114 × 140 mm – H 100 (to be confirmed)8 × suction cups 125 × 75 mm – H 100 longitudinal (to be confirmed)8 × suction cups 120 × 50 mm – H 100 longitudinal (to be confirmed)8 front stops + 2 additional side stopsEquipment:Vacuum pump 250 m³/hCN on external PC (PC included)17\"PC TFT display and instructions in EnglishMastercabinet Level 1Power supply: 400 V – 50 HzCompliance: CE safety standards version LDimensions: Estimated height: approx. 2400 mm (to be confirmed) Auction-ID: A1-50215 ...

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining range: X 2500 mm, Y 1360 mm, Z 100 mm (passage 120 mm) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 pos. ISO30, manual tilting X/Y index head Table: belt with vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: CE Auction-ID: A1-50215-34

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining range: X 2500 mm, Y 1360 mm, Z 100 mm (passage 120 mm) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 pos. ISO30, manual tilting X/Y index head Table: belt-driven, vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: CE Auction-ID: A1-50215-41

Machine: MASTERWOOD TEKNOMAT 2800 Cutting Machine Year: 2004 Machining capacity: X 2800 mm, Y 780 mm, Z 770 mm Positions: - Electrospindle milling unit HF 3.3 kW, 18,000 rpm, tilt -7° to +90° (x2) - HF 5.5 kW electrospindle milling unit, 18,000 rpm, horizontal fixed - HF 5.5 kW electrospindle milling unit, 24,000 rpm, vertical, ISO30 taper Equipment: panel support, 3 pneumatic front pressers + 2 stops, separate electrical cabinet Software: Masterwood MW313 with ANUBA programs (hinges, hinges, locks, strikers, special cutters) Axis speeds: U 60 m/min, V 20 m/min, W 20 m/min Safety: infrared barrier, CE protection Suction: Ø200 mm, flow rate 3000 m³/h Consumption: 32 A Dimensions: 5430 x 4798 mm Weight: 3600 kg + 430 kg (electric cabinet) Auction-ID: A1-50215-42