boring mills, machining centers used for sale

Switchbox 600x450x1200 Auction-ID: A7-35916

New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...

Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...

bore capacity in steel (diameter): mmthroat: 290 mmbore stroke: 160 mmtotal power requirement: 1,9 kWweight of the machine ca.: tdimensions of the machine ca.: mDescription to follow!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 290 mmbore stroke: 180 mmtotal power requirement: 1,9 kWweight of the machine ca.: tdimensions of the machine ca.: mDescription to follow!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0190 Brand: MASTERWOOD Model: PROJECT TF 100 - CE Standard CNC point to point throughfeed boring machine for panels, furniture, custom-made furniture, kitchens, bathroom furniture, carpentries and various - CE Standard Features: Robust clamping device for panel translation running on linear guides with preloaded ball bearings and moving by means of ball screw with high precision and stiffness. Brushless motor Working table: table with idle rubber wheels for panels in and outfeed . Panel movement on air film to avoid any scratching of panels with delicate surfaces . Panel pusher for smooth and accurate movement. Longitudinal sinking reference stop. Automatic reading of panel length Operating unit: boring head with vertical and horizontal spindles plus grooving saw unit. Centralised chips suction outlet Numeric control with PC: Windows operating system - network conn ...

Code: 0187 Brand: MASTERWOOD - ZANGHERI E BOSCHETTI Model: LIGNA 3-group multiple boring machine for carpentry, furniture, custom-made furnishings, panels and various Technical data: 1 horizontal boring unit with 21 spindles 1 vertical boring unit with 2 transverse heads with 21 adjustable spindles that can also be positioned longitudinally Steel guide with millimetre scale and 32 pitch scale for positioning stops and pneumatic pressers Spindle centre distance 32 mm Threaded drill bit attachment 2 pneumatic pressers that can be positioned to lock the panel Max panel thickness 90 mm Horizontal boring depth 85 mm Motor power Hp 2,5 Operating pressure 6-8 atm Overall dimensions mm 1850 x 1200 x 1600 h Weight kg 630

number of spindles: 4 Stkbore capacity in steel (diameter): 25 mmspindle distance: 475 mmtable-size: 450 x 1900 mmmorse taper: MK 4 total power requirement: 10,2 kWweight of the machine ca.: 3 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling spindles: 21 Pitch: 32 mm Passage width: max. 1,000 mm Swivel: manual

1 used WEINMANN Gebertisch, built in 2022, as good as new, For now.. without control, as this remains in the overall production control. Control is about 6000 euros new from Weinmann. Size 12 x 3 m - Model BuildteQ A 570.. Sale as seen from site without warranty, dismantling is helped with overhead crane and forklift free of charge without warranty.

32 mm pitch, 3 drills, drill head swivels to the table, stop

Rover B4.65 Machine table size 6,450 x 1,279 mm, machine with travel table. 3 axles, for sale on behalf of customers. Visits and test runs are possible by arrangement.

Olive and pot belt drilling machine Ganner for windows Type 370 Machine No. 190469 Built in 1994 Combined Corner Bearing and Olive Drilling Machine Drill head with 3 drill bits Motor power 0.75 kW 2800 rpm Compressed air connection 5 – 7 bar Suction nozzle diameter 100 mm Well functioning condition Dimensions approx. 2700 x 900 x 1400 mm Weight approx. 250 kg

Pitch: 32 mmWorking width: 640 mmBoring depth max.: 55 mmWorkpiece thickness: mmMotor output: 1,5 kWOverall size: mmWeight: 260 kgNumber of boring spindles: St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): 1800 x 900 mmNumber of spindle head vertical: 1 St.Number of spindles head horizontal: 0 St.Number of tools: St.Dust suction hood: 100 mmNumber of milling agregates: 1 St.working dimensions: 1800 x 900 mmYear: 2022 Boring power: mmSpeed of boring spindles: U/min.Speed: U/min.Required air-pressure: barDiameter of the saw arbor: mmtotal power requirement: 2,8 kwWeight: kgDimensions (L/W/H): 2400 x 1400 x 1900 mmMotor output: 2,2 kWCapacity: 100 m³/h kg/hSawing unit: Sawblade tiltable: °Saw blade diameter: mmControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Depth Hole Drilling Machine Hempel Type NPE Drilling length max. 800 mm Drilling possible from both sides Workpiece rotates – drill stands and pushes itself pneumatically into the workpiece air is blown through the hollow drill rod, the chips fall out at the other end was used to drill longitudinally through long lamp stands for cable ducts

OFFER - KRÜSIMATIC from Krüsi G1 4 axis system 1 used carpentry machine from KRUeSI type Kruesimatic G1 Year of manufacture 2005 Can be operated with all carpentry programs such as Catwork, SEMA, Lockrichs, S & S, Nut Reiner, etc. 4 axis system with dovetail cutter Task / Editing from right to left 6 Side processing without having to turn the wood! Total length approx. 18 m Weight 5.5 t BTL controlled for interface to the office or of course manual input on the machine. To increase the cutting performance, the feed rate is frequency-controlled and can be optimized for many cross-cut cuts Platform height without floor shaft 920 mm Sections fall into mobile box incl. chips The system only needs to be connected to the electrical cabinet with plugs Max. wood cross-section - 200mm x 320 mm Plant set up and ready for demonstration Available IMMEDIATELY The entire system ha ...

rapid traverse in the axis x + y: 20 m/minspindle diameter: 110 mmx-travel: 2.500 mmy-travel: 2.000 mmz-axis: 1.500 mmB-axis (table): 360 °Control: Heidenhain iTNC 530 table surface area: 1.600 x 1.250 mmworkpiece weight: 4.000 kgturning speed range - spindle: 5 - 5.000 U/mintool taper: ISO SK 50 spindle diameter: 110 mmcapacity: 63 KWfeeds - x-axis: 15 m/minfeeds - y-axis: 15 m/minfeeds - z-axis: 15 m/minrapid travel in X - Y - Z: 20 mm/mintool length - max.: 500 mmtool diameter: 125 (250) mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNC tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1

Weinmann Profi WBZ160 Brand: Weinmann Type: WBZ160 Profi Year of Make: 2014 Control PC86, Wupworks, Schuler MDE, woodScout Homag Power Control: Homatic Power Control - Homatic CNC System PC85 with Windows XP (US) embedded industrial PC Selection menu, Alarm texts in plain text, Ethernet connection, Remote diagnostics, Post-processor connection - 1 hard drive - 1 hard drive for data backup - 1 CD-ROM drive - 1 USB port - Colour monitor 17 inches with PC keyboard and mouse The data for the processing of the individual bars can be transferred directly from the CAD system via LAN/USB stick/CD. Optionally, the data can be entered directly on the machine. Machine operation by one person. Includes automatic collection. Fully integrated cutting optimization. Specifications: Workpiece length max X: 13,700 mm Workpiece width max Y: 405 mm Wor ...

number of spindles: / bore capacity in steel (diameter): / mmbore stroke: / mmBD13M – 5-Spindle Gang Drill / Bench DrillThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1250 mmy-travel: 880 mmz-travel: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain TNC 430NC-swivel head B-axisNC-rotary table C-axisautomatic tool changer for 30 toolscoolant through spindle device (IKZ) 40barchip conveyorcoolant deviceTechnische Daten / technical details:X-Weg / X-travel 1250 mmY-Weg / Y-travel 880 mmZ-Weg / Z-travel 800 mmC-Achse Rundtisch / C-axis rotary table 360 x 0,001 °Spindelaufnahme / spindle taper SK 40 Drehzahlbereich Spindel / spindle speed 12000 Upm /rpmVorschub / infeed 20-10000 mm/minEilgang / rapid feed 24 m/minRundtischabmessungen / rotary table measures 1250x1000 mmGewicht der Maschine ca. / weight 13000 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and d ...

bore capacity in steel (diameter): 60 mmthroat: 390 mmbore stroke: 250 mmfeed: 0,1 - 0,6 mm/Uspeeds:: 62 - 1120 U/mintool taper: MK 5 Table dimensions: ca. 700 x 600 mmtotal power requirement: 4,5 kWweight of the machine ca.: 800 kgdimensions of the machine ca.: 1200 x 1000 x 2400 mmwith threaded cartridgesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

COMEC horizontal oscillating mortiser mod. MMS/9 1500 2C+2UF - N. 8 spindles - N. 2 head drilling units (right + left) - N. 2 independent oscillations - Maximum working length 1500 mm - Locking system - EC standards (year 1999) - Complete with manual and declaration -Volt. 380/50 - Matr. 990415

Max drilling depth 150 mmMax drilling length 310 mmHeading 270 x 90 mmHead rotation +/- 45°Min/max height door/window 600/1000 mmWorktable dimensions 420 x 60 mmTilt adjustment work table +/- 45°Motor chain 2,2 kWFront mechanical pusherAutomatic chain lubrication pump

panel thickness: min 10mm, max 50 mmmax panel dimensions X : 3000 mm / Y : 900 mm min panel dimensions X : 300 mm / Y : 90 mm Feed speed : 20 m/minDrilling motor 2,2 kWspeed : 4,460 r/minvertical drilling spindles 86 horizontal drilling spindles, 2 x 2 in X direction, 1 x 2 in Y directiongrooving saw in X direction, diameter 125 mm

Line has got 2 throughfeed drilling machines Weeke 1st drill Weeke BST30/25, N° 0-259-05-3283-01-0810, 1992Equipment:2 x hor. Units, split drilling blocks, each with motor 1,8 kW, 13-spindle drilling blocks, centers 32 mm6 x bottom unit, split drilling blocks, each with 1,8 kW motorvertical blocks swivelling 360° Min/max motor centerdistance: 160 - 576 mmMin drilling unit center distance: 192 mmPreselection for automatic cyclesPanel sizes, length 250 up to 2500 mm, width 200 up to 800 mm, thickness 12 up to 40 mm2nd drill Weeke BST30/25, N° 0-259-05-3284, 1992Equipment:Machine prepared to take 2 horizontal units at later date6 x bottom unit, split drilling blocks, each with 1,8 kW motorvertical blocks swivelling 360° Min/max motor centerdistance: 160 - 576 mmMin drilling unit center distance: 192 mmPreselection for automatic cyclesPanel sizes, length 250 up to 2500 mm, width 200 u ...

Hardware drilling and recessing machine, with multi-spindle headTable mountedMotor 1,1 kWFence left and right, 1,5 m. long