104 INDEX used machine for sale

turning diameter: 140 mm turning length: 615 mm control: C200-4D spindle passage: 65 mm Main spindle: turning speeds: 5.000 U/min max. torque at 40% / 100% load: 145 / 105 kW turret-slide: 1,2 und 3 x-travel: 110 mm z-travel: 360 mm y-travel: 70 mm rapid traverse X/Y/Z: 25/12/45 m/min Opposed spindle: slide travel X-axis: 150 mm Z- Travel: 600 mm turning speeds: 5.000 U/min B - axis: B-Korrekturachse +/- 1 ° tool turret - number of stations: 3 x 12 tool taper DIN 69880: VDI 25 x 48 C-axis: 0,001 ° total power requirement: 61 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 9,75 x 3,10 x 2,85 m Loading: Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005 for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: BREUNING ILS-REX-7208 automatic workpiece unloader, built i ...

Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

workpice diameter max.: 90 mm forward bearing diameter: 140 mm Turning speeds mainspindle: 4.200 U/min Power: 35,5 KW Control: INDEX C 200-4 travel -x axis: 1.500 mm travel -z axis: 340 mm travel -y axis: 180 mm b-axis: 360 ° CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis. Further information: - direct measuring system on X + Z The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-300 | V 300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mm turning length: 400 mm control: C 200 / 8 total power requirement: 60 kW weight of the machine ca.: 8,5 t Swing Ø above bed, max. 300 mm Max. turning Ø for chucking work, approx. 250 mm Travel of Slides: Turret 1, X / Z travel 163 / 550 mm Turret 2, X / Z / Y travel 140 / 250 / 260 mm Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5,000 rpm Feed range 0 - 15,000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories / Special Features SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. Spindle indexing an ...

turning diameter: 300 mm turning length: 710 mm control: SIEMENS SINUMERIC 840 total power requirement: 40 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____________________________________________________________ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly a ...

turning diameter: 200 mm turning length: 400 mm control: SIEMENS SINUMERIC 840 C total power requirement: 40 kW weight of the machine ca.: 6.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 60 mm turning length: 200 mm number of slides: total power requirement: 20 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 420 mm turning length: 1250 mm control: INDEX, C 200-4 D swing diameter: 630 mm travel x1: 320 mm travel z1: 1250 mm travel x2: 170 mm travel z2: 1250 mm travel x3: 320 mm travel z3: 1250 mm main spindle speed: max. 3000 U/min main spindle drive: 53 kW spindle passage: 102 mm spindle head: DIN 55026 Gr. 11 max. torque on the spindle: 675 Nm sub spindle - spindle speed range: max. 3000 U/min sub spindle drive: 53 kW sub spindle - spindle passage: 102 sub spindle - spindle head: DIN 55026 Gr. 11 sub spindle - spindle torque: 675 Nm travel sub spindle: 1250 mm feed power: X1 14000/Z1 14000 N rapid traverse: X1 20/Z1 40 m/min feed power: X2 8600/Z2 14000 N rapid traverse: X2 20/Z2 40 m/min feed power: X3 14000/Z3 14000 N rapid traverse: X3 20/Z3 40 m/min numbers of turret head positions: Rev. 1 = 12 numbers of turret head positions: Rev. 2 = 10 numbers of turret head p ...

turning diameter: 626 mm turning length: 3000 mm control: Siemens type: 840D spindle passage: 100 mm Turret 12-fold, 12 stations: turning speeds: 2800 U/min total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine: 15 Pos. accessories:: Pos. electric measuring devices: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 60 mm cross-slide: 4 turret head: 6 Pos. thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 60 mm cross-slide: 4 turret head: 6 Pos. thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 600 mm turning length: 1500 mm control: C200 T turning diameter over slide rest: 425 mm spindle passage: 100 mm Tool changer: live tooling: turning speeds: 10-2800 U/min transmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mm steady: tail stock: c-axis: total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 580 mm turning length: 1600 mm control: Siemens 810 T turning diameter over slide rest: 320 mm spindle passage: 85 mm Tool changer: turning speeds: 12,5-4000 U/min transmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mm steady: 170 mm tail stock: total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 280 mm turning length: 800 mm control: Siemens type: 840 D c-axis: live tooling: Tool changer: turning speeds: 4000 U/min swing diameter: 320 mm 3 jaw chuck Forckrath: 250 mm tail stock: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 1250 mm control: Siemens type: 840 C swing diameter: 590 mm turning speeds: 3500 U/min Torque: 275/178 Nm spindle passage: 50/65 mm clamping chuck diameter: 250 mm output: 43/28 kw Tool changer: 80 Pos. tool taper: Capto C 4 Turret 12-fold, 12 stations: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC multi-spindle automatic lathe, make Index, type MS52C2-1, year of manufacture 2004, serial no. 160024, - Robot cell, - 7 clamping devices, - 3 rigid tool holders single, - 3 rigid tool holders multiple, - 4 driven tool holders, - Extraction Büchel Handling and loading robot cell Stäubli Unimation incl. basket translator with basket stack for raw and finished parts, two stacked shuttles for supply/removal baskets, integrated measuring station Commissioning 2021 Connected load 24 kW, control, make Index, type C200-4D (Siemens 840 D-Basis), - 2 control stations, - 6 spindles, - Travel path X/Y 300 x 500 mm, - Bar diameter max. 52 mm, - - Spindle speed max. 5000 rpm, -12 tool carriers, coolant device, - Industrial robot, Manufacturer: Stäubli, - Programming panel, - Removal device, - Depositing device, - Accessories, Machine designation: CNC multi-spindle lathe, Machine number: 242070 ...

turning diameter: 210 mm turning length: 600 mm control: INDEX C 200 total power requirement: 35 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m On behalf of the customer Price negotiable / against bid The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully functional Index Lathe Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.

length: 610/710 mm width: 625 mm height: 830 mm weight: ca. 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mm turning length: 400 mm control: Siemens type: C 200-4 840 C spindle passage: 65 mm Tool changer: 2 x14 Pos. Turret 12-fold, 12 stations: c-axis: live tooling: 2x Revoler total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: 360 mm control: Siemens S3 T swing diameter: 370 mm Tool changer: 14 Pos live tooling: turning speeds: 25-4000 U/min transmission ratio: 2 total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: 360 mm control: Siemens S3 T swing diameter: 370 mm tail stock: Tool changer: 14 Pos total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 80 mm turning length: . mm control: Siemens C 200 tool change unit: 14 live tooling: swing diameter: 130 mm spindle passage: 42 mm turret head: 2 total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 6 spindle passage: 27 mm turning length: 59 mm hexagon material: 24 mm square material: 18 mm cross slide travel: 36 mm longitudinal slide travel: 85 mm spindle turning speed range: 366 - 5020 U/min max. torque: 95 Nm control: INDEX total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 440 mm turning length: 1500 mm control: C 200 Tool changer: 16 3 jaw chuck Forckrath: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar type: 6.26HS-4.4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.