5 ENGEL rubber injection presses used machines

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.

Engel Injection Machine Type ES 1500T/160 V – ELAST Stroke slide plate 300mm Stroke central ejector for slide plate 100mm Force central ejector for slide plate 30kN Stroke lateral mechanical ejector 250mm Stroke lateral hydraulic ejector 250mm Force lateral hydraulic ejector 80kN Stroke central ejector 120mm Force central ejector 20kN Pump drive power 15kW Oil filling 1 225 Operating pressure of hydraulic system 250bar Capacity temperature control unit 2x3 kW Total connected load 48kW Dims: 2675mm long x 1350mm wide x 3310mm high Weight: 6900 With instruction manual

Year of construction : 2011 Control CC200 Locking force 400 tons incl. various accessories ( Piovan cooling unit, Tooltemp cooling unit, vacuum pump ) Machine comes directly from production

Description New screw

Description New screw

Complete control CC 90 for ENGEL injection moulding machines

machine in stock!

Engel injection moulding machine old

Manufacturer/manufacturer: Angel Typ/type: 330/75 HL - V Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 750 kN Holmabstand/Dist.Betw.Tiebars: -. Disk size/platen size: 660 mm x 560 mm WZ height/mould hight: min 200 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 650 mm Auger/screw size: 40 mm Stroke volume/shot volume: 201 cc spec. Spritzdr / injection pressure: 1600/2180 bar General / General Engine power: 15 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 3.8 m x 1.3 m x 2 m Weight/weight: 4900 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robots / robotic interface

Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 1100 kN Holmabstand/Dist.Betw.Tiebars: Disk size/platen size: 730 mm x 600 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 50 mm Stroke volume/shot volume: 251 cc spec. Spritzdr / injection pressure: 1300/2050 bar General / General Engine power: 18.5 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 4.8 m x 1.4 m x 2 m Weight/weight: 6000 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 2 Robots / robotic interface

Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes

Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

Key data: 500 , 30

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Key data: 4200 kN

Machine in production !1

Key data: 700 kN, 35 mm

used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English  ...

Key data: 750 kN, 40 mm

Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm

* SPECIAL OFFER for renovation of warehouse space - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 102.273 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 40 mm - Injection pressure: 1.211 bar - Injection volume: 201 cm? - Clamping force: 700 kN - Platen size (h x v): 590 x 340 mm - Dimensions (long x wide x high): 3.370 x 3.580 x 2.640 mm - Weight: 7.500 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 101.636 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm