saws used for sale (1,176)

Key data: 303 mm, 3830 mm

Sawing capacity at 90 degrees: Round: Ø303 mm Square WxH: 360 x 305 mm Sawing capacity at 45 degrees: Round: Ø265 mm Square WxH: 265 x 300 mm Sawing capacity at 30 degrees: Round: Ø175 mm Square WxH: 175 x 300 mm Sawing speed: 20 - 90 m/min. Saw blade: 3830 x 25 x 0.9 mm 3850 x 27 x 0.9 mm Working height: 700 mm Equipped with: - Mitre saws -Semiautomatic - Roller conveyors approx. 8 meters -Operating instructions Country of origin: Germany Motor power: 1.1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg

Key data: 425 mm, 145 mm, 120 mm

Saw blade: ø 425 mm Saw Capacity: 145mm Round 120 mm square Saw Angle: 45º Left/Right Sawing speed: 18 / 36 rpm Auto. Roller conveyor start: MPS, type 4010, 8 meter range Equipped with: - Semi automatic - Hydraulic clamping - Variable saw feed Country of origin: Germany Motor power: 5.5 kW Machine weight: 1000 kg Machine LxWxH: 120 x 90 x 180 cm

Key data: 350 mm, 45 °

Saw blade: ø 350 mm Saw Capacity: 110 mm Round / 100 mm Square Saw angle: 45º Left/Right Sawing speed: 18 / 36 rpm Equipped with: - Coolant system - Pneumatic clamping - Variable feed -Saw blade Country of origin: Germany Motor power: 1.8 kW Machine LxWxH: 800 x 1000 x 1850 mm Machine weight: 800 kg

Control: KASTO Max.cutting range: 530 x 630 mm Cutting speed: 12 ? 120 m/min Saw band dimension: 7675 x 54 x 1.3 mm Automated bar shift: No Coolant tank:185l Chip conveyor: YES Made in Germany

Control: KASTO Max.cutting range: 400 x 400 mm Cutting speed:20 ? 110 m/min Saw band dimension: 5700 x 41 x 1.3 mm Automated bar shift: YES Coolant tank:100l Chip conveyor: YES Made in Germany

Bundle clamping device manual

Sawing capacity: 280 mm round / 330 mm square Sawing capacity 45º: 250 mm round / 250 mm square Sawing speed: 40/80 mtr.min. Band saw blade: 3,320 x 27 x 0.9 mm Saw angle: 0 - 60º Equipped with: - Cooling system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

cutting diameter: 810 mmsaw band length: 8200 mmcutting width: mmControl: total power requirement: 4 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 4020 x1630 x 2570 mmBrand: BMSYType: 810 CGHYear of make: 2019Capacity round 45º: 555 mm øCapacity round 60º: 320 mm øCapacity round 90º: 810 mm øCapacity square 45º: 700 mmCapacity square 60º: 310 mmCapacity square 90º: 770 mmCapacity rectangular 45º: 555 x 770 mmCapacity rectangular 60º: 310 x 770 mmCapacity rectangular 90º: 810 x 770 mmMitre: 60 °Saw blade dimension: 8.200 x 41 x 1,3 mmSaw speed: 20 - 100 m/minSaw motor: 4 kWMachine dimensions (lxwxh): 4.020 x 1.630 x 2.570 mmMachine weight: 3.970 kgCap. 30 ° round: 700 mm øCap. 30 ° straight: 700 x 770 mmCap. 30 ° square: 700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1020 mmsaw band length: 9500 mmcutting width: mmControl: total power requirement: 7,5 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 4500 x 1700 x 2750 mmBrand: BMSYType: 1020CYear of make: 2019Capacity round 90º: 1.020 mm øCapacity square 90º: 1.020 mmCapacity rectangular 90º: 1.020 x 1.020 mmMitre: 45 °Working height: 535 mmSaw blade dimension: 9.500 x 54 x 1,6 mmSaw motor: 7,5 kWMachine dimensions (lxwxh): 4.500 x 1.700 x 2.750 mmMachine weight: 6.950 kgClamp: 1 x 45 ° adjustableHydraulic clamping including top clampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 96380 UMSCHREIBUNG Volautomatische Kaltkreissäge Fabrikat Kaltenbach Model KKS 400 NA Machine Nummer 1700 - 03004 Baujahr 1982 Rechtwinkeler Schnitt Rund à 90º 130 mm Viereckig à 90º 315 x 50 mm U-profiel à 90º 24 x 85 mm Sägeblatt Durchmesser..………………… 400 mm Sägeblatt in Graden verstellbar 0 – 180 º Drehzahlen 10 – 14 – 20 UpM Hauptmotor Leistung…………………… 0,9 – 1,2 – 1,8 PS Anschluss spannung……………………. 380 Volts Zubehör Lademagazin Automatische laden bis 1700 mm Maschine Maschine ist in gutem Zustand

Saw blade Diameter 400 mm Saw capacity 150 mm round Suitable for: - Plastic pipe - Air clamping Country of origin Netherlands Engine power 2.2 kW Machine Weight 750 kg

Saegebaender Roentgen, new

ADIGE TT640 circular sawing machine was built in 2009 in Italy by ADIGE S.p.A. The machine enables precise, automatic cutting of a wide range of metal workpieces, such as bars, tubes and profiles. Solid, square and rectangular sections are machined by means of a cutting disc with a maximum diameter of 275 mm. It ensures high repeatability and cutting precision in both unit and series production. The ADIGE TT640 is equipped with a feeder that facilitates the loading of material into the workspace and enables continuous machine operation. The intuitive SIEMENS SIMATIC PANEL HMI control panel enables precise programming and control of process parameters, ensuring user-friendly operation. All this is complemented by an extremely rigid design that maintains high operational stability even during the most intensive use. The ADIGE TT 640 automatic circular sawing machine weighs 1350 kg. T ...

Year: 2006 - technically efficient, ready to work – after full service - motor: 3 kW - both cutting discs can be tilted +/- 45 degrees - cutting disc: 450 mm (vertical), 400 mm (horizontal) - cooling and lubrication system - compressed air preparation station - electronic angle indicator for two axes

BOMAR Ergonomic 320.250 G metal band saw was built in 2011 in the Czech Republic by BOMAR, spol. s r.o. The machine is designed for precise cutting of workpieces at an angle of 0°, +45° and +60°. The machining is performed by a robust saw blade driven by an electric motor with worm gear, which operates in an oil bath. In order to ensure precise guidance of the saw blade, it is mounted in tapered roller bearings with pre-clamping. Secure clamping of the workpiece during cutting is ensured, in turn, by a quick-clamping vice. The BOMAR Ergonomic 320.250 G is distinguished by its extremely stable design based on a robust arm, which is raised manually and lowered under its own weight. The arm’s descending speed is adjustable via a hydraulic cylinder with flow valve. The combination of high cutting precision with simple operation and reliable components makes the Ergonomic 320.250 G ba ...

SILOMA OL 420A NC metal band saw was built in 2018 in Bulgaria by SILOMA JSC. The machine is designed for precision cutting of workpieces with round, square and rectangular cross-sections at 90° angle. It also enables bundle cutting, i.e. the simultaneous machining of several workpieces in one working cycle. This makes the SILOMA OL 420A NC the perfect choice for professional production plants specialised in series and mass production. Cutting is performed by a reliable saw blade, driven by a powerful electric motor. The cutting speed is adjustable in the range from 15 to 100 m/min. All operating parameters are programmed in the intuitive NC controller with touchscreen display, which facilitates operation, provides access to key information and allows quick programming of work cycles. The SILOMA OL 420 A NC band saw weighs 2500 kg. Technical specifications of the SILOMA OL 420A NC ...

- technically efficient, ready to work – after full service - disc diameter: 450 mm - bottom cutting - cooling and lubrication system - vertical pneumatic clamps - protective cover - compressed air preparation station

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 400 mm - bottom cutting - cooling and lubrication system - vertical pneumatic clamps - protective cover - compressed air preparation station

PILOUS ARG-300F metal band saw was built in 2024 in the Czech Republic by PILOUS-pásové pily, spol. s r.o. The machine is in perfect technical condition, practically unused – only a few test cuts were performed on it. The PILOUS ARG-300F is an extremely versatile machine designed for both industrial plants and professional workshops. It is ideal for precise cutting of workpieces made of, among others, stainless steel and tool steel at an angle of 90°, +45° and +60°. Cutting is performed by means of a reliable saw blade, driven by a powerful electric motor with worm gearbox. The cutting speed is adjustable in a range from 15 to 90 m/min with the use of an inverter. Stable clamping of the workpiece, on the other hand, is ensured by a massive quick-clamping vise. The machine’s design is based on a robust arm made of high-quality grey cast iron. This solution guarantees high r ...

Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation - vertical pneumatic clamps - work area lighting - compressed air preparation station

OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...

METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...

FMB JUPITER band saw was manufactured in 2000 in Italy by FMB s.r.l.. The machine, designed for precision cutting of workpieces, is an indispensable tool in any production facility. The machining process is performed fully automatically by means of a high quality 3180 mm long saw blade, which is driven by a powerful electric motor with an stepless gearbox and transmission wheel. The robust design also eliminates any vibration generated during machining, guaranteeing exceptional stability, even during the most intensive production work. In 2024, the FMB automatic band saw underwent an upgrade, during which the control panel was replaced with a new one. The FMB JUPITER bandsaw weighs 1150 kg. Technical data of the FMB JUPITER metal band saw - cutting angle: 0°-60° - cutting capacity (0⁰, circle): 240 mm - cutting capacity (0⁰, square): 240x240 mm - cutting capacity (0⁰, rect ...

FOSHAN LX-425 metal circular sawing machine was built in 2019 by the Chinese company Foshan Nanhai Longxin Machinery Co., Ltd. The machine designed for precision cutting of workpieces at a fixed angle of 90° performs the machining process (from loading to the workpiece cutting itself) fully automatically, thanks to the provision of a bar feeder with magazine. The machined workpieces have a smooth surface without any burrs or distortions. In addition, the ability to cut more than one piece of material (bundle) makes the FOSHAN sawing machine an excellent choice for mass production. To this date, the FOSHAN LX 425 circular sawing machine has cut bundles of 4 brass tube profiles into suitable lengths. Technical specifications of the FOSHAN LX-425 tube cutting machine - cutting angle: 90° - cutting disc diameter: 300 mm - cutting disc bore: 32 mm - cutting disc rotational speed: 42- ...

Saw blade PEHAKA HS-820/820 lenght: 10700 width: 67

ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of choiceing single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...

Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

- engine power: 1.1 kW - dial diameter: 300 mm - cut from below - cutting at an angle of -45 °, 90 °, + 45 °, intermediate angles set manually - vertical pneumatic pressure - protective cover - cooling installation

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides