saws wood used for sale (1,064)

Altendorf WA6 Format circular saw new Format sliding table: 2600mm Engine power: 400V 4 KW (5.5 hp) Saw blade: 315mm swivel: 90°-45° Pre-scoring unit: with engine 0.37 KW (0.5 HP) For wood, plastic and non-ferrous metal G&AL-WA6-2600 ASSEMBLED CHECKED AND MEASURED! SPECIAL PRICE Format sliding table:also in 1600mm SPECIAL PRICE Accessories: Saw blade pendulum protection (upper protection) for saw blade 350mm

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

see pdf attached

cutting range: 90°: 90 mmcutting range: 45°: 75 mmSaw blade diameter: 315 mmTable dimensions: 800 x 500/400 mmSaw blade: 30 mmmachine weight ab.: 45 kgdimensions: 850 x 600 x 430 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 700 mmCutting height: 420 mmcutting width: 680 mmMotor output: 3 kWTable dimensions: 695 x 990 mmTable tiltable: 45 GradDimensions (L/W/H): 1260x840x2270 mmmachine weight ab.: 400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 205 mmMotor output: 11 kWcutting width: 450 mmCutting length: 5200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 600 mmCutting height: 380 mmcutting width: 570 mmMotor output: 2,2 kWTable dimensions: 810 x 590 mmtable height: 905 mmvoltage: 400 V / 50 Hz range L-W-H: 1120 x 750 x 2125 mmWeight: 275 kgDust suction hood: 2 x 100 mmband speed: 1550 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 500 mmCutting height: 330 mmcutting width: 480 mmMotor output: 1,5 kWTable dimensions: 495 x 670 mmTable tiltable: 45 GradThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Warehouse No. 8725 Multi-blade saw Paul BK 34/800 Complete cutting system with cross-cut saw Paul GE 20, Cutting saw Paul BK 34/800, multi-blade saw BK 34/800 -Chain conveyor with lifting platform -Cross-cut saw Paul, Type 20 E, YOC 92, 14 kW -Roller conveyor -Conveyor with shortage roller -Ejection station for cuts -Roller conveyor with centering -Separation saw Paul, type BK 34/800, YOC 92, 25 kW -Transverse survey Paul Type AKA, YOC 92 -Frequent leaf saw Paul Type BK 34/800, YOC 92, 75 kW -Security channel -Sorting belt for manual sorting -Stacking system Hydraulic pump 11 kW and miscellaneous 15 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 42 mm Input lengths on the cross-cut saw: 2500 – 5000 mm ...

Weibert WJ-K315 Format circular saw Format sliding table: 2550mm Engine power: 4 KW (5.5 hp), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° WJ-800100

HBS 533 band saw new Engine: 1.5 KW/ 400 V Cutting height: 270mm Cutting width: 514mm Roll diameter 530mm Precision roller guide Band length: 3865mm Table inclination -10°-+45° Weight: 163kg

Weibert BS 610 Wooden band saw Work table: 650 x 800mm Cutting height 360mm Swivel -15° +45° Engine power 4 KW Bandwidth: 6 to 40mm Band length 4900mm Suction nozzle 2x 100mm WJ-X00610 mel k options: Table swivel with handwheel adjustment Miter attack 5 KW motor Driving equipment Circular cutting device

Double Mitre Saw Manufacturer: Duespohl Model: DGK 400 B Built: 2000 Cutting width: 100mm Cutting height: 100mm Saw aggregates Swivel: -45° - + 45°

Weibert K350 Format circular saw Format sliding table: 3.2m Engine: 5.5kW 400V 50Hz S1 Speed: 3800- 5200 rpm Saw blade diameter: max. 400mm Electrical height adjustment Electric swivel 0-45° Cutting height 90°: 120 mm Cutting height 45°: 75 mm Cutting width: 1250mm with pre-scratcher D=120 bore 20mm Electrical height adjustment Weight 1100kg

Complete gate system Sagegatter mohringer oss71 with bv built in 1989 read through 710mm hub 500mm hydraulic sagespanner remote-gesteurchipwagen spe's round wood on givee rolengang with mechanicization

Weibert Z-400-EL Format circular saw Sliding table 420x3200 mm anodized, cutting length 3500 mm Motorized height adjustment and inclined position saw blade 3 Cutting speeds: 3000/4000/5000 rpm Car. Star/Triangle Switch 7KW 400V 50HZ Vorritz engine 1.3 kW 3 Cutting speeds: 3000/4000/5000 rpm Cutting height at 90° 125 mm, at 45° 90 mm Cutting width between saw blade and parallel stop 1350 mm Laying table (1420 x 650 mm) with miter stop with 2 folding stops G&RO-Z-400-EL

Massive aluminium die-cast base Engine S1: 1800W Weight: 23kg HM Circular Saw Blade D: 305mm Idle speed 4200 rpm Swivel -45/+45° extendable back stop Quiet Belt narrow laser stroke marks exactly the cutting line Deep stop G&HM-KAP-305JL

SCM minimax sc2c Format circular saw Table dimensions 1020 x 325mm Table height 900mm Trimming length 1600mm Inclination of the saw blade 90° - 45° Max saw blade diameter 315mm Motor 400V 50Hz 4kW Suction nozzle diameter 120mm Suction plug. Saw blade protection 60mm Weight 295kg Speed saw blade 4000 rpm G&STÃ?-5504215 Prescribing optional! Drezahl Ritzer 7600 rpm Precresing saw blade diameter 80mm G&STÃ?-5504215VR

Graule ZS 200N Cutting and miter circular saws Motor 400 V / 3.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range: horizontal 45°-90°-20° Miter range: vertical 60° -90°-45° Saw blade s. 520 mm Suction nozzle 100 mm Weight 310 kg G&GA-ZS200N-3KW Underframe optional

Graule ZS 170NF Cutting and miter circular saws Motor 400 V / 2.0 kW Speed 3500 rpm Cutting length 430 mm (at 90°) Cutting height 170 mm (at 90°) Miter range: horizontal 45°-90°-25° Miter range: vertical 90°-45° (left) Saw blade s. 420 mm Suction nozzle 100 mm Weight 120 kg

HWS 720 K Tilting circular saws Electric motor with direct drive Saw blade diameter: 700 mm Speed: 1400 1/min 400V 50 Hz Working height: 850-1150 mm Rocker pad: 735 mm Dimensions: 1270 x 730 x 1130 mm Weight: 100kg G & PIECES 5965721

Double circular saw cross cut Rüco L x W x H: 6 x 3 x 1.2 m Weight approx. 1.5 to Built in 1969 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

I have blades with Group teeth for subsequent cutting machine and a feed rate of Volmer

FKS 250-1300 Circular sawing machines Max blade D.: 254 mm Be hem length 1250 mm RIP fence cutting width 610 mm The length width 845 mm Blade tilt 90 ° /-45 ° Table dimensions (L x W) 650 x 350 mm Table height 835 mm Blade rotation speed 4000 1/min Engine: 1, 5kW 230V Dust nozzle D.: 100 mm / 30 mm Weight: 142kg G & PIECES 5902030

Different parts of the B & Z - sorting carriage are for sale.

Band saw Hunziker Roll ø 800 mm 3.5 HP engine Built 1952 Weight approx. 730 kg L x W x H: 120 x 100 x 230 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

WK 700 Z classic Tilting circular saws Tilting saws/firewood saw PTO Performance: Tractor approximately 12KW - 16 HP Speed: 1450 RPM with the carbide saw blade 700 / 30 mm with longitudinal stop Depth of cut: D = ca. 250 mm with drive systems Weight: ca. 120 kg G & BGU-90157 Accessories: G & BGU-91272 wood retaining claw G & BGU-95060 PTO PTO standard 102

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

1 Post Saegeblaetter (8 Stueck) for Kaltenbach All Saegeblaetter either re-ground or Unused. 1 square diameter 560mm 5 stub diameter 500mm 2 square diameter 400mm Hole in the middle 50mm