saws wood used for sale (1,067)

Twin-shaft multi-blade saw Raimann Type KD 31 Year of Make: 1981 Chain width 340 mm Cutting height 200 mm Electric height adjustment 2 x 45 kW motor Shaft diameter 65 mm Feed modernized to infinitely variable speed via potentiometer from approx. 0 to 40 m/min. incl. 3 saw bushes with saw blades and partly new saw blades Transport chain with spikes Good condition, ready for immediate use, demonstration possible.

Length of the rolling table: ca. mmSaw blade diameter: ca. 400 mmweight: ca. 900 kgParallel stop:Stop sliding table: 1460 mmwith stop extension to 2840 mmStar delta circuit has been renewedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two identical circular saws Cremona for the veneer production industry are available. Working width saw 1: 4200mm, working width saw 2: 5100mm. An on-site inspection is possible. Sale of individual units is possible.

Length of the rolling table: ca. 2280 mmSaw blade diameter: ca. 400 mmweight: ca. 900 kgParallel stop:Stop sliding table: 1550 mmwith mitre railincl. side stop extension to 1000 mmStar delta circuit has been renewedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

H.I.T. NSM 250 RESAWING SAW WITH WOOD FEED FROM THE LEFT (LEFT-HAND MACHINE). The system was fully functional until it was professionally dismantled and dismantled. In addition to the resawing saw with side fabric capping, a model turner, an alignment and centering table and a splitter separation transport included. Specifications Cutting height: 40 - 240 mm Cutting width: 18 - 400 mm / 5-leg variable Width unedged: 750 mm Lengths: 2.50 - 14.00 m Feed: max. 60 m/min Swivel circular saws for side goods cutting with 2 x 7.5 KW motors Saw drive with 2 x 132 KW motors Errors in the information excepted.

cutting diameter: 340 mmdimensions of saw-blade: 4860 x 32 x 1,1 mmcutting range square: 340 x 340 mmcutting speed: 17 - 120 m/mindrive motor: 4 kWweight of the machine ca.: 2,5 tdimensions: ca. 2600 x 2600 x 1650 mmncl. chip conveyor and chip trayHydraulic bundle clamping deviceincl. electrical circuit diagramsthe previous owner only sawed at one speedAdjustable cutting pressure valveHSS bimetal saw bandHydraulic material and saw band tensioning with electrical monitoringAutomatic height adjustment of the saw frameAutomatic adjustment of the movable band guide armElectrical piece counterDigital display of the dimension preselectionConstant, hydraulic clamping of the carbide band guidesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 0-45 °Length of the rolling table: 3350 mmcutting width: 1100 mmMotor output: 5,5 kWCutting height: 155 mmCutting height at 45°: 110 mmSaw blade diameter: 450 mmSpeed: 3000 | 3600 | 4200 U/min.weight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Construzioni Macchine Legno s.r.l. multirip saw is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/rigid: 90mm/120mm, weight: approx. 3000kg. On-site inspection is possible.

Key data: 45 °, 3300 mm, 1250 mm

Equipment: - Scoring saw unit - Trimming length 3300 mm - Cutting width 1250 mm, adjustable by handwheel, digitally displayed in control panel, width stop can be folded down - Cutting height and angle above hydr. Foot pedal adjustable, digitally displayed in control panel - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrics: 380 V, 50 Hz, 3~, 13.0 A

Centauro Slitting Saw Type SLG 8000 Year of construction: 2011 Cutting length max. 8000 mm Cutting width max. 1900 mm Cutting height max. 160 mm Motor 11 kW with laser light with pressure beam

3.5 to low-loader with new floor plate, Tuf neu 12/24 Top condition, no damage 13.06.2012

saw blade diameter: 225 mmcutting diameter: max. 60 mmfeed: max. 600 mmtotal power requirement: 5 kWweight of the machine ca.: 1,03 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15282 90 band length: 4600 - max. 4750 mm: Fabr. Ideal weight: ca. 890 kgdimensions of the machine ca.: 130 x 850 x 2300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 500 mmthroat: 490 mmworkpiece height: 220 mmtable-size: 600 x 600 mmsaw band length: 3350 mmturning speeds: 12 - 1900 m/mintotal power requirement: kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,2 x 0,8 x 1,95 mBand saw with- swivel table- Footswitch- Machine light- IDEAL welding deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 440 mmthroat: 420 mmworkpiece height: 200 mmcutting speed: 20 - 1550 m/mintable surface area: 560 x 560 mmband length: 3250 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,2 x 0,8 x 2,1 mBandsaw with- Saw blade welding unit- Grinding stone- Saw bands- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An NC mitre saw Omga S.p.A. is available. Speed: 3000 rpm, saw blade diameter: 300 mm, saw blade bore: 30 mm, max. cutting height: 60 mm, max. cutting width: 60 mm, max. feed: 1250 mm, angle adjustment: 45°/30°/22.5°, machine dimensions X/Y: approx. 5600 mm/1250 mm. Documentation available. On-site inspection is possible.

A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible.

Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible.

Saw blade length: 4330mm-4450mm, dimensions X/Y/Z: approx. 850mm/520mm/1800mm. An on-site inspection is possible.

Saw blade diameter: 750mm, saw blade speed: 2200/min, table dimensions: 1500x1500x900mm, cutting height 90°/45°/30°: 295/200/137mm, motor power: 16kW, length: 1800mm, width: 1500mm, height: 1100mm, weight: 650kg. On-site inspection is possible.

Max. cutting height: 100mm, saw blade diameter: 250-400mm, bore: 30mm, carriage length: 2600mm, motor power: 5.5kW, length: 3100mm, width: 2400mm, height: 1500mm, weight: 770kg. On-site inspection is possible.

cutting diameter: 260 mmsaw band length: 3830 x 27 x 0,9 mmcutting range flat: 310 x 260 mmcutting range square: 260 x 260 mmcutting speed: stufenlos 19-110 m/minfeed length: 750 mmmultiple feeding length: 6750 mmheight of material-table: 700 mmweight of the machine ca.: 1,4 tdimensions: ca. 2100x2300x1720/1300 mmroller conveyor: 1460 mmchip conveyor: cooling unit: incl. several band saw bladesincl. chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engine output: 5 kWsaw-blade dia.: 300-350 mmWorking speed: 0-40 m/minweight: ca. 1.300 – 1.800 kg kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 5300 mmCutting height: 0-2.150, 80-2.050 mmautomatic: Option ja/neinELCON precision panel saw type ADVANCE 215 Partnership Edition--------------------------------------Technical description:Cutting height: vertical: 0-2,150mm, horizontal: 80-2,050mmCutting length: 5,300mmCutting depth: 80mm (with clamps: 55mm)Saw blade: diameter 303mm, bore 30mm, Z=60 hollow roof toothSaw blade rotation: 5,000 rpm.Motor: 5.5 kW, including automatic star-delta startRequired air pressure: 6 barMeasurement reading for horizontal saw cuts:-over scale from 0 - 2,070mm-via strip cutting stop from 75 - 500mmMeasurement reading for vertical saw cuts:-over scale from 0 - 1,300mmExtraction connection: 1 x 100mm 1 x 120mmFeatures:-ADVANCE clamping system, consisting of: 2 pneumatic clamps,those on vertical axes are motorized on a ball screw from abovemove down. The tongs carry plates weighingmax. 15 ...

Cutting length: 2200 mmCutting height: 30 mmautomatic: nein ja/neinThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HWS 702S Rocking circular saw Saw blade diameter 700mm Cutting capacity round timber max. 240mm Logs max. 370 x 240mm Speed 1400 rpm Motor 7.5kW 400V 50Hz LxWxH 1270 x 730 x 1130mm Weight 128kg G&STÜ-5963710

F 45 EvoDrive: The new F 45 is a masterpiece in terms of technology and design. The one from the ground up on newly designed machine stands exceeds all previous values in the points torsional stiffness and low vibration. The smooth front and the legroom on the ground let you get closer to the sliding table saw and stand on the workpiece. The design-adapted, legendary smooth-running double trolleys is still the measure of all Things when it comes to precision cuts and zero maintenance. In addition comes the control at eye level, with which you can adjust the height and swivel of the saw blade plus, depending on the choice of the control package, the speed and more functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: With this sliding table saw characterful design meets timeless aesthetics. 7" touchscreen with separate keyboard Au ...

Key data: 45 °, 3200 mm, 1450 mm

Saw blade tilt and height adjustment motorized and with digital display Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min ̄¹ High dead weight ensures vibration-free running Large boom table with material roller Rip fence with round bar guide and digital position display Extendable aluminium longitudinal stop with two folding stops 7.5 kW main motor mounted on robust cast iron frame Four-bearing sliding carriage with double trolley made of anodised aluminium with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood can be easily swivelled up with the help of a gas pressure spring Saw blade clamping via tool-free Rapid system Cutting width with rip fence 1450 mm Max. cut-to-length width ...

cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw-------------------------------------------------- -----------Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm.When sawing stacked boards h max. 100 mm.The structure is made entirely of thick-walled and reinforced throughoutpainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cutting control in ergonomic position.Engine power of the saw motor 5.5 kW.Adjustable cutting speed via a pneumatic controller.Maximum system for weight balance and longevity. Shock absorbing system.Independent pneumatic adjustment options to adapt to differentTypes of processing.Durable and easily replaceable saw blade adjustment bar.HM circular saw blade, diameter 500 mm, Z=108.Pneumatic upp ...

Vertical manual panel saw Brand: Putsch Type: SVP 133 New machine standard features: - electric driven, automatic shift gate - swivelling centre support for small workpieces (length approx. 3,900 mm) - 4 vertical fixed sawing positions horizontal cuts - 1 measuring stop for vertical cuts - retractable transport wheels - self breaking engine - Preparation for connection to separate extraction system - TRK extraction system (BG wood dust tested) - 400V/3/50Hz - safety devices, sound insulation, tool set for saw blade change - operating instructions and spare parts catalogue technical data: - max. cutting length: 3200 mm - Max. vertical cut : 3200 mm (3100 with digit. dimension display for vertical cuts). - max. cutting height: 1900 mm - highest horizontal cut: 1700 mm - max. cutting depth: 60 mm - engine power: 5 hp (3.7 kW) - saw blade Ø: 250 mm - speed sa ...