peripheral equipment (e.g. heating, conveying, drying) used for sale (597)

Finnrose Plate Stacker Type ST-10-170 Electronic For automatic stacking (e.g. on roller conveyor for further transport) Of plate-shaped workpieces, doors, or woods Was used to stack timber behind a four-sided planer Workpiece size Maximum 2500 mm x 800 mm Minimum 400 mm x 250 mm Weight maximum per workpiece 80 kg Capacity 20 workpieces per minute, depending on the workpiece size Maximum stacking height above floor 1800 mm Belt drive 0.18 kW Roller drive 0.09 kW Compressed air consumption per stroke 3.9 NL Instruction manual and circuit diagram available Weight approx. 600 kg Dimensions 2800 mm x 2200 mm x H 1100 mm (H max. 1800 mm)

Key data: 42 m²

Extraction system Filter system Spänex Model ADDITOR U Type II + III – VU – 15 – SBU 165 – S2 – 000 Order number 40132/93 Built in 1993 Filter area 42 m² Filter bag material needle felt, in very good condition Capacity 64,200 m³/h 5 chip collection containers each 165 litres Motor vibration With heat return air duct Fire Extinguishing Line With control cabinet With documentation and circuit diagram With fan 7.5 kW Pipe connection diameter on the fan 300 mm Dimensions of the extraction system Frame with container Overall height 2971 mm Overall width 980 mm Length of the extraction system approx. 3600 mm Plus add-on parts The plant has already been dismantled and Ready for loading from stock

table length: 1300 mmtable width: 800 mmstroke height: 1010 mmweight max. in kg: 2000 kg: 190 mmconnected load frequency: 400 Vtotal power requirement: 0,75 kWstroke speed - idle stroke upwards: 40 sek.stroke speed - idle stroke downwards: 30 sek.weight of the machine ca.: 0,28 tdimensions of the machine ca.: 1,3 x 0,8 x 0,23 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mmtable width: 1500 mmstroke height: 1900 mmweight max. in kg: 3000 kgtotal power requirement: 1,5 kWstroke speed - idle stroke upwards: 55 sek.stroke speed - idle stroke downwards: 30 sek.connected load frequency: 400 Vweight of the machine ca.: 0,650 tdimensions of the machine ca.: 2,2 x 1,5 x 0,3 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mmtable width: 1500 mmstroke height: 1850 mmweight max. in kg: 2000 kg: 260 mmtotal power requirement: 1,5 kWstroke speed - idle stroke upwards: 40 sek.stroke speed - idle stroke downwards: 30 sek.connected load frequency: 400 Vweight of the machine ca.: 0,45 tdimensions of the machine ca.: 2,2 x 1,5 x 0,26 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 71 m², 825 kg, 2640 mm

Clean Air Dust Extractor RL350 Extraction connection on the right Nominal volume 8,000m³/h H3 GS dust-tested Jet cleaning Chip container capacity 500l Electrics RL350 FU 11kW Extinguishing device powder extinguisher 12kg More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group

Key data: 71 m², 825 kg, 2640 mm

Clean Air Dust Extractor RL350 Extraction connection on the right Nominal volume 8,000m³/h H3 GS dust-tested Chip container capacity 500l Electrics RL350 FU 11kW Extinguishing device powder extinguisher 12kg More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group

Guiding machine / measuring machine Year of construction 2025 7.5 kW Filter area 32m^2 Intake manifold: 300 Dimension: LxWxH: 3,650x1,540x2,570

volume capacity: 60 l/mimengine output: 2 kWturning speeds: 2850 U/minfeed pressure: 9 barDimensions (LxWxH): 2400x1060x560 mmTotal Dimension: 2400x1250x1200 mmempty weight: 280 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Air consumption: 48 m³/hMotor output: 5,5 kWOverall size: 620 x 980 x 1480 mmReceiver: 215 LThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air consumption: 97,2 m³/hMotor output: 9 kWOverall size: 630 x 1220 x 1720 mmReceiver: 270 LThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmstroke height: 400 - 1010 mmweight max. in kg: 300 kgweight of the machine ca.: 220 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEINIG Return Mechanization RF 902 / 15RV WEINIG return conveyor system / workpiece return WEINIG similar to NEUMANN RF24 for the return of scantlings and strips to planing and moulding machines or individual wood sanding machines (one-man operation) Specifications: Workpiece dimensions length 300 – 3500 mm Workpiece dimensions width 30 – 230 mm Workpiece dimensions thickness min. 20 mm Conveyor path cross buffer approx. 1,100 mm Driven infeed and outfeed roller conveyor pneumatically timed Working height 800 – 960 mm Drives: Roller conveyor infeed: 0.18 kW, 30 m/min, constant Cross feed motor 0.37 kW, 40 m/min, constant Roller conveyor outlet: 0.18 kW, 60 m/min, constant Cross transport dimensions: Length 2,250 mm Width 1,570 mm WEINIG intermediate conveyor belt, type LTB 250-3500, S/N 81005, year 1997 Length 3500  ...

Manufacturer: Wemhöner, Driven: yes, incl.control: no, Working widht mm: 900, Width total mm: 1000, Total hight mm: ca 255, Adjustable: no, Roller pitch mm: 200, 1 Stückzahl : 3, 1 Stücklängen mm: 1600,

Manufacturer: Purete, Type: PRT-C9213, Year: 2020 neu, Working length mm: 2.000, Working widht mm: 1.320, Ex-schutz: no, UV-Band: no, Total hight mm: +/- 880 , Belt width: 1320, Bandkühlung: no, Own controller: yes, Total hight mm: +/- 880 , Engine power kW: 0,75, Feeding speed min-max m/min: 5 - 20, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Längen möglich von-bis mm: 1.500 - 5.000, FREE TEXT: andere Längen auf Anfrage, Year :2020 neu

Manufacturer: Transporband 1000 X 780 mm, Working length mm: 1000, Working widht mm: 780, Total hight mm: 920, Total power kW: 0,7,

Manufacturer: Hackemack Transportband, Working length mm: 2500, Working widht mm: 1300, Own controller: no, Bandsteuerung : yes, Total power kW: ca.0.75, elektronisch regelbar: 6-30,

Manufacturer: PramacHubwagen, Fork length in mm: 2000, Lifting power kg: 1200,

Manufacturer: Venyeskob 2 Stück 90 Grad, Type: Transportbandkurve, Year: ca, Inner radius in mm: ca.4500, Working hight mm: 890, Feeding speed max m/min: 6-30, Engine power kW: ca 2 X 1,5, FREE TEXT: eine Kurve ist überbaut, Year :ca

Manufacturer: Knecht Kartonverschlussautomat, Carton size min. L x W x H mm: 2500 X 450 X 400, Total connection value in kW: ca. 2, Foil 1 width mm: 50,

Manufacturer: Koch Winkelübergabe, Type: mit pneimatischem Überschwieber, Year: ca.1998, Working length max mm: 2000, Working widht max mm: 300, Feeding speed min m/min: 5-20, Working hight adjustable mm: yes, Year :ca.1998

Manufacturer: Hackemack Transportrollengang, Type: Rollgang, Year: ca.1990, Working length mm: 2100, Working widht mm: 1460, Engine power kW: 0,5, Durchmesser Rolle mm: 60, Rollenmittenabstand: 140, Wellendurchmesser: 25, angetrieben über Rundriemen: yes, Total hight mm: 890 +- 50, Total hight mm: 890 +- 50, Feeding speed continous adjustable: yes, Year :ca.1990

Manufacturer: Cefla, Type: Rollgang, Year: ca.2003, Working length mm: 1350, Working widht mm: 920, Ex-schutz: yes, UV-Band: ca220, Total hight mm: 80, Belt width: Schiene, Frequency converter: 3-5, Own controller: yes, Total power kW: ca.3000, Working length mm: 1350, verriegelungskontakt vor Maschine: 1600, Year :ca.2003

Manufacturer: unbekannt, Working length mm: 3100, Working widht mm: 1400, Total hight mm: 880, Belt width: 1400, Own controller: no, Total hight mm: 880, Feeding speed min-max m/min: 10-25, elektronisch regelbar: möglich, Belt control: no, Movable: no,

Manufacturer: Cermet, Type: Transportrollengang, Working length mm: 5000, Working widht mm: 1300, Engine power kW: 0,75, Feeding speed min-max m/min: 8-25, Rollenmittenabstand: ca.200, Total hight mm: 980, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes,

Manufacturer: Bargstedt Aufstapelanlage, Type: TBH 500 , Year: 2005, Control: Bargstedt, Program: yes, Stacking device: yes, Work piece length max mm: 3000, Work piece length min mm: 280, Work piece width min-max mm: 250-1200, Min.-max. workpiece height in mm: 12-60, Stack height in mm: 1600, Number of stacks: 2, Workpiece weight/stack position in kg: 60, Outlet roller conveyor mm: yes, Cycles approx.: 15, Year :2005

Manufacturer: Transportrollgang, Working length mm: 3000, Working widht mm: 1420, Engine power kW: ohne Motor, Durchmesser Rolle mm: 80, Rollenmittenabstand: 130, angetrieben über Kette: yes, Anschlagkante Höhenverstellbar: yes nicht verstellbar,

Manufacturer: Maskiner Verpackungsanlage Laminat, Year: 2001, Cycles approx.: ca.6, Feeding belt mm: 200, Foil wrapping machine mm: Maskiner , Foil stations: 2, Intermediate transport mm: 1500, Shrinking tunnel mm: 3500, Outlet conveyor mm: 2500, Schrumpftunnel kW Leistung: ca.30, Foil 1 width mm: ca max.650 mm, Foil 2 width mm: ca max.650 mm, Through running hight mm: 200, Working width mm: 300, Year :2001

Manufacturer: Winkelübergabe mit pnematischer Aushebung, Working length mm: 1000, Working widht mm: 980, Ex-schutz: yes, UV-Band: 200, Total hight mm: 80, Working length mm: 1000, Engine power kW: 0,5, Belt control: Riemenaushebung für Transportrichtung links und rechts/Aushebung 1800 mm länge,