paper converting: die cutters used for sale (226)

Labeling Division m/m lettering / Stamped no. Slope 25 1:3 4x3 9006 4.3.74 41a 7 8x8x8x8 40 6 3 401 5 m/m 44 3:1 3x4 1235 51 3:1 4x4 Viereckloch / Nr. 38449 42 2x8 Kunststoffkamm / USA 41 2x7 Kunststoffkamm 20 3:1 3.5x4.5

A complete GEW UV curing system for a Gallus Labelmaster LM 440 is offered. Max. UV output: 140W/cm, UV lamp housings: 11, including 9 housings with lamps and 2 housings for screen printing modules, Operating hours: approx. 2900h/lamp, HMI: for 10 stations, Control system: GEW RHINO HMI. Including 2 RHINO control cabinets, 2 fans, a complete exhaust duct system and mounting kit for the Gallus Labelmaster LM 440. An on-site inspection is possible.

One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: ap ...

Impressions=17 m, Condition= Very Good , Availability= 2026-07-11, Maximum sheet size: 760 × 600 mm Maximum die cutting size: 743 × 585 mm Minimum sheet size: 279 × 210 mm Paper: 100 g/m² and above Board: up to 1,500 g/m² (approx. 1.8 mm) Plastic materials (PET, PP, PVC): up to 1,500 g/m² Maximum speed: 5,500 sheets/hour Maximum cutting pressure: 165 tons Gripper margin: 10 mm Machine dimensions: approx. 4.87 × 2.69 m Weight: approx. 5,500–6,000 kg Features: Automatic die cutting Creasing Embossing Hot foil stamping

corner punch, cleaned and tested. Punching tool No. 7

Reference ID: PP-59584 Category Flatbed Die Cutter Manufacturer Bobst Model SP 102 E II Year Built 2001 Speed 7500 sheets/h Max. size 72x102 cms Min. size 35x40 cms Condition Good Location Europe Availability Immediately Machine Description Approx 40,000 hours of work Max pressure: 250 tons. Thickness from 80 to 2000 grm/sqm Non stop feeder and delivery Center line system Two frames for stripping and two for die cutting Micrometric adjustment thin plate system Double action stripping Cube control system In production, any test possible, very nice conditions Complete with all parts and many accessories, Available immediately

Size: 1420 x 1020 mmEquipments:Max. speed 6,000/hGripper 18–22 mmMax. sheet 1420×1020 mmMin. sheet 700×500 mmDie-cut force 600 tStripping stationIntermediate sheet feeder Pre-pile deviceWorking platformCardboard 100–1000 g/qm2 & corrugatedTool prep table6× chases · 6× stripping frames · 6× setup trolleys

IBERICA SPDK-105 • Reference ID: PP-59169 • Category: Flatbed Die Cutter • Manufacturer: Iberica • Model: SPDK-105 • Year: 2013 • Condition: Good • Location: Europe • Availability: Immediately • Speed: 7,500 sheets/hour • Maximum sheet size: 750 x 1050 mm • Minimum sheet size: 350 x 400 mm • Maximum cutting area: approx. 740 x 1050 mm • Cutting pressure: approx. 300 tons • Suitable for carton: approx. 90 – 2,000 g/m² • Suitable for corrugated board: up to approx. 4 mm • Non-stop feeder system • Non-stop delivery system • Automatic sheet feeding • Central lubrication system • Touch screen control panel • PLC-controlled operation system • Double sheet control • Front and side register system • Quick-lock die change system • Safety covers and light barriers • High-pile automatic feeder • Waste stripping unit ...

max. format 26 x 38 cm Built in 1964 Inking unit not complete 2 locking frames Dry pollinator Delivery date: immediately from stock

Manual Sheet Feeding (Hand-Fed), Mechanical Clutch-Brake Drive System, Micrometric Cutting Pressure Adjustment, Universal Self-Centering Chase, and Heavy-Duty Cast Iron Construction for Stable and Precise Die-Cutting Performance.

Fully Automatic High-Performance Die Cutting Machine With Integrated Stripping And Blank Separation, Designed For Industrial Folding Carton And Packaging Production. The Machine Features A Non-Stop Feeder And Delivery System For Continuous Operation And Maximum Productivity, Max. Sheet Size: 1060 × 750 Mm, Min. Sheet Size: 400 × 350 Mm, Paper From 90 G/M², Carton Up To 2000 G/M², Corrugated Board Up To 4 Mm, Max. Die Cutting Pressure: 260 Tons, Mechanical Speed: Up To 6,500 Sheets/Hour (Designed For Up To 8,000 Sheets/Hour), Quick Lock Die Frame, Quick Lock Stripping And Separation System, Ultrasonic Double Sheet Detection, Anti-Static System, Precision Gripper Transport System, Pneumatic Die Locking, Motorized Pressure Adjustment, Heavy-Duty Drive System, High-Precision Registration Control, Complete Tooling Included, Quick Change Frames, Automatic Waste Removal, Non-Stop Delivery  ...

Fully Automatic High-Performance Die Cutting And Stripping Machine Designed For Precise Processing Of Paper, Carton Board, Corrugated Board, And Plastic Materials (PP/PE), Max. Sheet Size: 1060 × 750 Mm, Min. Sheet Size: 400 × 370 Mm, Max. The cutting area: 1040 × 720 mm, paper from approx. 80–90 gsm, carton up to 2000 gsm, corrugated board up to 4 mm, plastic up to 0.6 mm, max. cutting pressure: 300 tons, speed: up to 8,000 sheets/hour, registration accuracy: ±0.2 mm, non-stop feeder and delivery system, fully automatic stripping section, pneumatic die frame locking, motorized pressure adjustment with overload protection, precision gripper bar system with smooth chain drive, Automatic Lubrication And Oil Cooling, Touchscreen Control With Mitsubishi PLC And Omron/Siemens Components, CE Certified

Automatic Feeder, Complement of Infeed Table Furniture, OS Pull Side Lay, OOS Push Side Lay, Cube Control System, Electronic Device for Sheet Travel Control, Centre Line, Micro Adjustable 1mm Thin Plate System, Double Action Stripping, Non Stop Delivery, Stripping Pre Make Ready Table, Max Sheet Size : 740 x 1060 mm, Min Sheet Size : 350 x 400 mm, Max Speed : 7700 Sph, Max Impression Strength : 260 Tons

Maximum Sheet Size 1020 × 720mm - Max Speed 7500 sph - Min sheet 350 x 400mm. - Paper weight from 80-2000gsm - Corrugated up to 4mm - 250 Tonnes of Pressure - Non-Stop Manual Feeder with 18mm Infeed Bars - Mechanical Pull - Standard Front Margin - Micrometric Adjustment and Quick Chase in Platen Section - Stripping Section with Upper and Lower Frames and Spare Frames - Non Stop Manual Delivery

Max Size 108x78, Min. Size 35x30, Pressure 180 Tons, 4.500 sh/hour.

Max. size= 750 x 106 cm, Availability= 052026, Masterwork (Heidelberg) Automatic Diecutter with Stripping Station Max sheet size : 750 x 1060 mm Min Sheet size : 360 x 400 mm Max speed ; 7,700 sph Max cutting pressure : 260 tons Calliper : Min 90gsm Max 2000 gsm Complete with : Touchscreen machine operation Non-stop pallet feeder Belt table Centerline system by Punching- and Stripping stations Non-stop deliveryLOT Loaded in truck or container

Bobst SP 142 E, Year 1992, Max.Size: 1020x1420 mm, Min.Size: 500x700 mm, Max.Speed: 6500 Sh/h, Max.Cutting force: 600 T, Centerline, Quicklocksystem

Size: 920×1300 mmEquipments:Maximum sheet size 920×1300 mm, minimum size 560×1300 mmopening width within frame 920×1310 mm, maximum die size 910×1300 mmmaximum die-cutting area 900×1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mmmaximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/hinfeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h.Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t

A digital roll label color printing machine Xeikon including a Hunkeler unwinding module is available. Resolution X/Y: 1200/3600dpi, max. print width: 322mm, material width range: 200mm-330mm, max. repeat length: 55m, max. printing output: 380m²/h, material weight range: 40g-350g/m². Unwinding unit Hunkeler UW6-C 7199, year of manufacture: 2011, max. roll diameter: 1370mm, web width: 520mm, web speed: 220m/min, max. roll weight: 600kg. Documentation available. An on-site inspection is possible.

Martin 924 Midline Casemaker, Year: 1991, Max.Size: 2400x1200 mm, Min.Size: 750x340 mm, Max.Speed: 15000 Sh/h, 3 Color, Slotter, Rotary Diecuttung, Foldingstation, Counter Ejector, Taper, Prefeeder Packfeed, Mosca Strapping machine , Year 2009, in production

KAMA TS 105 / HFS 105 Year 2007 Diecutting and Hotfoil Sheet size : 74 x 105 max. / 33 x 48 min. Cardboard thicknesss: 130 - 1500 g/m² (1.8mm) Max. pileheight feeder : 1150mm Max. pileheight delivery : 880 mm Features: Mabeg Feeder Digital control Sheet allignment KAMA HFS 105 hot foil unit

Qty. 1 Second-hand Automatic Die Cutter Mfc.: Bobst Type: 102 E II Automatic Die Cutter Built: 1996 Speed: 7,500 Sheet per hour Max. Sheet Size 720 x 1020 mm Raised: 30 cm Steel Plate Feeder Lefthand Pull Sidelay Active Front Lays CUBE Touch Screen Computer Operation Chase with 1.0 mm Cutting Plate Centerline Micrometric Adjustment Quick Lock Chase Double Action Stripper Quick Lock Stripping Frames Spare Stripping Frames Selection Bars And Pins Non stop Delivery New Chains, Clutch & Brake 3 Years ago, only used as a backup machine since then

Rotary die-cutting machine Maximum sheet size: 915 × 640 mm Minimum sheet size: 250 × 420 mm Maximum die-cutting format: 915 × 626 mm Die-cutting start: 14 mm - TouchScreen control Siemens S7/1500 with Siemens servo motor - Anti-static device Kersten” DC102 F-K in feeder and delivery - Electronic side lay control - Foil delivery with fan control - Variable sheet brake - Low-pile delivery

Bobst Sprintera 106 PER - with PowerRegister, Jahr 2003, Paper_ Cardboard_ Corrugated, From 70 g/m2 250 - 2000 g/m2, E flute and B flute up to 4 mm, Sheet size max. 1060 x 760 mm min. 400 x 350 mm, Die Cutting with gripper max. 1060 x 745 mm, Embossing max. 1060 x 740 mm, Gripper size from: 9 - 17 mm, The cutting knives height 23.8 mm, Embossing height 6.35 / 7 mm, Pressure 2.5 MN max., Speed (sh/h.) max. 12,000, Pallet height max. 1600 mm., Inclusive : - Power Register -, Height 60cm - Quicklock System, Centerline

Bobst SP 104 ER,, Year 1996, Max.Size: 1040x740 mm, Min.Size: 400x350 mm, Max.Speed: 8000 Sh/h, Max.Cutting force: 250T, Max. Thickness Corrugated board: 4.0 mm, Max.Paper gr/m: 2000 gr., Centerline, Quick-Lock system, Micrometer adjustment on the counterplate, Safety clamps for chain blocking, Non-Stop conveyer + Feeder, Chase changer

Bobst SP 142ER,, Year 1985, Max.Size: 1420x1020 mm, Min.Size: 700x500 mm, Max.Speed: 6000 Sh/h, Max.Cutting Force: 600 T, Centerline, Quicklock system, With tool separation station, Between-bow inserter and pre-taping device,, Working platform,, - 1 x preparation table for external tool preparation, - 4 x frames for breakout molds, - 4 x closing frames for punching tool, - 4 x Rescue vehicle

Bobst SP 102 CER, Max.Size: 720x1020 mm, Min.Size: 350x400 mm, Year 1988, Max.Speed: 8000 Sh/h, Max.Cutting force: 250 T, Centerline, Quicklock system, Non-Stop in Delivery

hoogte vijfde wiel, Max.Size: 800x1120mm, Min.Size: 380x450 mm, Max.Speed: 6500 Sh/h, Jahr 1974, Centerline, Quicklock system, in production

Inline - BGM 3600, Jahr 1989, Max.Size: 3600x1600 mm mit Skipfeed: 3600x2100 mm, Min.Size: 1200x600 mm, 2 Color Printing Unit, 2x Sloter, Rotary Diecutting, Folding gluing, Taper, doublehead- Stitcher, Strapping machine, Stacker

Bobst SP 102 CER, Max. size: 720x1020 mm, Minimum size: 350x400 mm, Year 1988, Max.Speed: 8000 Sh/h, Max. cutting force: 250 T, Centerline, Quicklock system, Non-Stop in Delivery