other wood working machines used for sale (1,498)

Weima WL 4 Hackers Weima Single-shaft Shredder NEW Funnel opening with logspacer 600x1050mm Funnel content 0.6m/3 Working width of the rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Knife number 28 pieces Type & size of knives concave / 40 x 40 mm Sieblochung 10 - 100 mm Painting WEIMA Standard RAL 2002 / 7016 Connection value 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg 2nd knife row

• Height: 850 - 1000 mm • max length: 2400 mm (extendable) • max. static support load: 225 kg • Dimensions (LxWxH): 1600 x 600 x 850 mm • Weight: 30 kg • Electrical connection: 230 V / 50 Hz • for crosscut saws, belt grinders, cutting saws, etc. • Installation and adjustment without tools • foldable feet for space-saving storage or transport • Quick clamping ssystems enable quick conversion, e.g. for cutting down long workpieces The list price for this work table is € 139.00 (plus VAT). (Changes and errors to technical data and prices reserved!)

REMONNAY re-cutting machine Type DR8/225 Cutting height 225 mm, 7 stalk adjustment variable with mechanization, S-separation and saddle conveyor Feed roller table with reversing and alignment feeder Extraction device with cross-cut saws with side goods separator and pull-off roller aisle incl. electric control cabinet and control

Robland HX TZ Saw milling Engine: 2x 4 hp, 400V, 50hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Sliding table 1450 x 320mm Cutting length 1200mm Cutting width between Saw blade and parallel stop 600mm Miter attack with ezenter tensioner Weight 340kg

Weibert ASA 2803 Aspirator Rated volume flow: 2800m3/h Filter area 3.84 m2 Chip collection volume 240l Suction socket: 203mm Suction nozzle outlet: 3x 100mm Sound pressure level max. 87.5dB (A) Recording power 2.2kW Engine 400V 50Hz LxWxH 1500 x 500 x2100mm Weight 53kg

Saw milling Weibert FR3 new â?¢ Format sliding table 2000mm â?¢ Cutting height: 103mm â?¢ Boom table cpl. â?¢ Saw blade: swivel, max.315mm â?¢ 3KW motors (4KW) 400V 50HZ â?¢ Mill: rigid 90° â?¢ Milling rpm: speeds: 1500/3500/6000/8000 rpm. â?¢ Safety railmilling stop 500mm â?¢ Right- and left-hand-running milling â?¢ WJ-400100W7 Accessories: Driving equipment

Weibert FR3 Saw milling Demonstration device Format sliding table 2300mm or 2600mm Cutting height: 103mm Auslegertich kpl. Saw blade: swivel, max.315mm 3KW motors Milling: rigid 90° Milling rpm: Speeds: 1500/3500/6000/8000 rpm. Safety rails milling stop 500mm Right- and left-hand-running milling cutter WJ-400100

Technical description: -Trimming unit -Milling unit -Fine trimming unit -Scraper -Buffing unit

Size: 3,000 mm x 1,200 mm -no attacks -without pressing cylinders

Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Seitenversch.: 330 (mm) (Standard gauge) Driving speed: forward and backward 100 (m/min) Drive total: 5.1 (kW) Overall length: 3,150 (mm) Weight: approx. 1,250 (kg) Type of control: remote control

to the composed of angles by means of hot-melt glue to a Miter cut length of 100 mm

MITRE Assembly typesetting machine with high frequency Miter cut length 100 mm for the gluing of frame parts with white glue Various machines in stock

Technical data: Roll width: 1200 mm Length: 27 m Roll diameter: 168 mm Roller spacing: 800 mm Cut-outs: 5 PCs. Switching flag: 1 PCs. Power: 4,0 KW With built-in honing cross conveyor: Distance: 2.99 m Line number: 5 line Drive 2,2 KW

Technical data: Length: 1.0 m Stanganzahl: 4 St Drive: 4,0 KW

Castle admission machine Drilling group, Kettenstemmer, Stulpfraese with turret stop for doors in left-right execution. L x W x H: 100 cm x 60 cm x 220 cm Built in 1982 Weight approx. 400 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Type: 751 carton sealing machine top Type: 651 carton sealing machine below Machine is to the close of folding cartons with tape (top/bottom).

Vice for joinery Number of units: 8 JAWS: 15 x 10 cm Baking distance in the open position: approx. 15 cm All information without guarantee

Weibert form7 4-way combination machine Be hem length 2250 mm option: 2600 mm Cutting height at 90 ° / 45 ° 100 / 79 mm Cutting width on the parallel fence 820 mm Saw shaft speed 4000 RPM. Blade tilt 90-45 ° Planing width 300 mm 3 blade shaft Tersa Feed speed 7 m / min Max tool diameter 210 mm Max tool diameter retractable 180 mm Spindle speed 3500/ 7000 / 10000 RPM Spindle diameter milling - saw 30 mm Engine power 400 V / 50 Hz / S6 - 40% 3 x 5,0 kW -. Weight 525 kg G & pieces 5500309

Manufacturer Ruefli AG SA Biel - Bienne Very powerful exhauster, suction system Spaene suction with filter bag for woodworking machines, Power 2.2kw 2850rpm. machine probably unused except for advance guidance. Special price

Technical data: with driven rollers Roll width: 1,200 mm Wide lifting table 1,400 mm Length lifting table: 3,350 mm Height retracted: 900mm Max lifting weight: 5 to Lifting height: 1,000 mm Platform size (length x width) With built-up roller movement: Roll length: Roll diameter: 164mm Roll spacing: 640mm

Technical data: 6 kW Type: 233 407 00

Planer blade sharpening machine Meinert with built-in Cabinet apparatus for gang saws weight approx. 350 kg Built in 1963 L x W x H 80 x 60 x 140 cm The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Maximum volume flow: 390 l Capacity approx.: 266 l Maximum pressure: 10 bar Tank: 50 l Cylinder/level: 2/1 Dasr7h9qg Speed: 1,360 min-1 Engine power: 2,2 kW 230 v weight: 57.5 kg Year 2011 Dimensions (Lxwxh) in mm: 870 x 400 x 700 G &-2974-O2386

Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

tahlkonsole with height adjustable table Table 720 x 500 mm, thickness 8 mm Weight 20 kg Built in 1975 The console is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm long Fraeser  ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D  ...

Important and outstanding design features of the RaptorX-SL CNC Fraes machine / CNC-Fraese with steel substructure / RaptorX-SL2200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (through-shoehe under bridge : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special larges up to 17500 mm ( on one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produ ...

Wood Turning Lathe big turning diameter over bed allows the turning of workpieces with large diameter - ideal for turning E.g. plate user friendly adjustable speed Digital speed display comfortable working with hand pad and quick adjustment Spindle/tailstock bore 10 mm Top width: 457 mm Tip height over machine bed: 153 mm 3-stage variable spindle speed: 650-1450 min-1, 1250-2800 min-1, 1600-3800 min-1 Headstock, thread: M33 DIN800 Motor power S1 (100%) / S6: 550W / 770W Mains voltage: 230V Net weight: 33kg G & HM-D460FXL