other textile machines used for sale (237)

Leather Spilitting Machine. Camoga 520L+AS. New in 2016, light use since 2023. 520mm working width.

Harness Braiding Machine Type 32C No4 Manufacturer: JB Hyde 9½ inch centre hole Harness Braiding Machine Type 48C No4 Manufacturer: JB Hyde 19½ inch centre hole Harness Braiding Machine Type 16C No5 Manufacturer: JB Hyde 4½ inch centre hole Harness Braiding Machine Type 24C No4 Manufacturer: JB Hyde 5½ inch centre hole All fitted with: Foot control switch for stop / start and magnetic take off clutch All carriers fitted with rollers suitable for tubes or bobbins All machines fully guarded

Lot consisting of a beautiful Mantec laser table of which the operation is unknown. New owner has taken over the business together with this machine but never used it and does not know how it works, is now in the way. Comes with a control computer to operate it. This table can be broken down into sections of 200 x 200 cm. Auction-ID: A3-43538-17084

Auction-ID: A7-46691-31

Manufacturer: Brueckner Model: Power-Predry HDVB3 CF 20/2 Year of Manufacture: 2016 Application: Thermal treatment of flat textile webs Working Width: 600 mm min. to 2000 mm max. Web Speed: 2.5 m/min min. to 50 m/min max. Drive Side: Right Operating Side: Right Number of Drying Fields: 2 Field Lengths - Infeed conveyor belt: 2.4 m - Infeed tower: 0.7 m - Drying fields: 1.6 m (with 1 heating and ventilation section) - Outfeed tower: 0.7 m Ventilation and Heating - Ventilation System: Classic-Flow with adjustable flaps for upper and lower airflow - Heating Medium: Gas - Circulation Temperature: 75 to 150 degrees C - Exhaust Air Volume: max. 6000 m3/h Electrical and Safety Data - Operating Voltage: 400 V AC, plus/minus 5%, 50 Hz - Control Voltage: 230 V AC, 50 Hz / 24 V DC - Signal Voltage: 24 V DC - Noise Emission: equivalent continuous sound level at workstation, A-weighted: ...

Manufacturer: Rieter Model: Scragg DCS1200 Type: Texturizing Machine Year of manufacture: 1990 General renovation: 2012 Condition: Used Quantity available: 2 machines TECHNICAL SPECIFICATIONS - 216 spindles - Oiling device - Air jets for intermingling - Yarn brake sensors and cutters - Take up tube: 285 mm x 67 mm inner bull nosed Find more here - / Contact us at -

Manufacturer: Guidici Model: TG20 Super 4 Type: Texturizing Machine Year of manufacture: 1990 Condition: Used TECHNICAL SPECIFICATIONS - 288 spindles - Oiling device - Air jets for intermingling - Yarn brake sensors and cutters - Take up tube: 285 mm and 230 mm Find more here - / Contact us at -

Manufacturer: Ratti Model: R331 Type: Double Covering Machine Year of manufacture: 1990 Condition: Used Quantity available: 2 machines TECHNICAL SPECIFICATIONS - 240 spindles - Take up: 120 bobbins, 197 x 47 mm, inner diameter 44 mm Find more here - / Contact us at -

Manufacturer: LAIP Model: 198-HT Type: High Temperature Yarn Dyeing Machine Year of manufacture: 2008 Condition: Used, was working before dismantling TECHNICAL SPECIFICATIONS - Package diameter range: 1760 to 3000 mm - 2 sets of carriers, each set with 2 carriers - Spindles for 21 cm diameter packages - 64 bobbins per level - Total PES dyeing capacity: 1,300 kg - Control system: 777 Setex controller - Designed for synthetic yarns, primarily PES (polyester Find more here - / Contact us at -

Manufacturer: Ratti Model: R325N12012 NT220 Type: Covering Machine Year of manufacture: 1998 Condition: Used TECHNICAL SPECIFICATIONS - 120 spindles - Cylinder diameter: 225 mm - Take up tube: 285 mm Find more here - / Contact us at -

Manufacturer: Klieverik Model:TC151 / 3500 Year of Manufacturer: 2000 Type of Machine:Calender Working width: 3,500 mm - Machine is dismantled and stored in warehouse - Machine is without Oil heating boiler - Machine is without electrical control system Find more here - / Contact us at -

Carding Machine - Manufacturer: Spinnbau - Year of Manufacture : 2012 - Working width: 2.500 mm Setup: - Card Feeder - Weighing Scale - Breast Cylinder 2x Worker / Stripper - 1x Transfer Roller - Main Cylinder 6x Worker / Stripper - 1x Take-off Roller Cross Lapper - Manufacturer: Autefa - Model: CL3000 - Year of Manufacture : 2012 - Working width: Input: 2.500mm - Output: 2.500 mm - max. Speed: 100 m/min Including: - All Control Cabinets - Control Panel with HMI Find more here - / Contact us at -

Manufacturer: Automatex Model: CBF Year of Manufacture: 2008 Technical Specifications: - Working width: 2.500 mm - RPM: 1200 - Needle Density: 2x 460 N/m - Needles: 5000 N/m - Stroke: 60 mm - Needle boards: 1 set (two boards) Find more here - / Contact us at -

Manufacturer: Trützschler Model: ZNM-D Year of Manufacture: 2011 Technical Specifications : - Working width: 3.600mm - Cutting positions: 3 double cuts Additional information: - Machine is WITHOUT Control System! Find more here - / Contact us at -

Manufacturer: Texnology Model: MASCOTT-Plus-25-30-CRZ-1 Year of Manufacture: 2010 Specifications: - Working width: Feeding: 2.5 m; Exit: 3.5 m - Speed: 70 m/min Additional information: - Includes control system, cabinet and panel Find more here - / Contact us at -

A complete thermobonding nonwoven production line is available for sale as one full package. Feeding Unit - Manufacturer: Trutzschler - Year: 1995 - Setup: 3-way bale opener, 8-chamber multimixer, Trutzschler FBK 536 Carding Machine - Manufacturer: Spinnbau Bremen - Year: 1995 - Working width: 2,300 mm - Setup: 2x doffer, 3 random rollers - Speed: 10 to 100 m/min Calendar - Manufacturer: Ramisch Kleinewefers - Year: 1995 - Working width: 2,300 mm - Setup: 2 hot cylinders with water cooling system Winding Unit - Manufacturer: Spinnbau Bremen - Year: 1995 - Working width: 2,300 mm - Setup: Automatic winding, automatic cutting, automatic roll change Oil Heating Section - Type 1: Natural gas heating system, manufacturer BT Boiler, max. temperature 280 degrees C, hot oil system - Type 2: Electric resistance heating, manufacturer AURA Included with the Line - All control cabinets a ...

Manufacturers and Models: - Tima Tec - Varioroll Type 418 - PLEVA - RF110-AF120 - Erhardt + Leimer - CN 4007 - Menzel - S104413 Technical Data - Working width: 3,300 mm - Years of Manufacture: 1999 to 2005 Line Components - Unwinder - Dancer with sliding plate storage - Surface smoother - Microwave sensor - Metal detector - 4 coating chambers - Inspection stand - Winder Find more here - / Contact us at -

A complete air-jet loom with integrated Jacquard machine is available for sale. The system is built on a Dornier air-jet base loom fitted with a Staubli Jacquard machine. The complete unit was integrated and delivered by Vaupe. Base loom manufacturer: Dornier Jacquard machine manufacturer: Staubli System integrator: Vaupel - Model: EWM 90-180 E - Year of manufacture: December 2003 - Supply voltage: 400 V - 50 Hz - CE certified: Yes - Made in Germany Find more here - / Contact us at -

Manufacturer: FEHRER Model: NL9/S Year of Manufacture: 1991 Specifications: - Stroke: 60mm / max. 1,200 RPM - Needles: 1x 3,000 N/m - Working width: max. 2,600 mm Including: - Control Panel - Control Cabinet Find more here - / Contact us at -

Manufacturer: Ratti Year of Manufacture: 2008 Model: R 325N DT Number of spindles: 90 Number of sections: 10 Spindle type: Tangential belt drive Max. mechanical spindle speed: 9,000 min-1 Max. technological spindle speed: 7,000 min-1 Spindle pitch: 366 mm Whorl diameter: 52/64 mm Twisting range: 40 to 1,869 / 32 to 1,519 tpm Yarn count range: 167 to 560 dtex Feed Package - Type: Bobbin - Max. length: 290 mm - Max. diameter: 250 mm - Volume (smooth yarn): 4,500 g Winding - Number of winding decks: 1 - Traverse gear: UDR - Max. bobbin diameter: 250 mm - Traverse stroke: 250 mm - Tube diameter x length: 69 x 290 mm - Max. mechanical winding speed: 200 m/min - Max. technological winding speed: 170 m/min Machine Frame Dimensions - Number of sections: 10 - Length per section: 1,830 mm - Total machine length: 19,000 mm - Machine width: 860 mm - Max. height: 1,756 mm - Height t ...

Manufacturer: Ratti Year of Manufacture: 2008 Model: R 325 NF Spindles per section: 14 Number of sections: 1 to 12 Total number of spindles: 126 Spindle type: DT 140 Spindle drive: Tangential belt Max. mechanical spindle speed: 14,000 min-1 Min. mechanical spindle speed: 6,000 min-1 Max. technological spindle speed: 12,000 min-1 Whorl diameter: 35 mm Twisting range: 59 to 2,777 tpm Yarn count range: 33 to 330 dtex Feed Package - Type: Cops (ring-spun bobbin) - Feed package length: 420 mm Winding - Number of winding decks: 1 - Traverse gear: UDR - Max. bobbin diameter: 250 mm - Traverse stroke: 200 mm - Tube diameter x length: 56 x 230 mm - Max. mechanical winding speed: 150 m/min - Max. technological winding speed: 140 m/min Machine Frame Dimensions - Length per section: 1,830 mm - Total machine length: 2,554 + (1,830 x n) mm - Machine width: 860 mm - Max. height: 2,1 ...

Manufacturer: Lezzeni Model: CLV/C 200 Year of Manufacture: 2008 CE certified: Yes Number of spindles: 32 Spindle pitch: 200 mm Max. twisting spindle speed: 5,000 RPM Max. stroke (hub): 420 mm Spindle type: HZ 55/21 Electrical Data - Mains supply: 400 V - 3 phase - 50 Hz - Nominal current draw: 12 A - Main motor current: 12 A Motors and Drive - Spindle drive motor: 4 kW - 4 pole - 230/400 V - 50 Hz - Stroke control motor: 0.09 kW - 6 pole - 230/400 V - 50 Hz - Spindle drive belt: TFL 7S 8460 x 40 mm - Yarn brake type: 003353 Machine Dimensions - Machine length: 5,405 mm - Machine width: 1,800 mm - Machine depth: 700 mm Find more here - / Contact us at -

Manufacturer: Klieverik Type: GTC-3400 Year of Manufacture: 2005 CE Mark: Yes Working width: 3,400 mm Voltage: 400 V / 50 Hz Current: 27 A Find more here - / Contact us at -

Manufacturer: Veit Type of Machine : Tunnel Finisher Model: 865 Year of Manufacture: 2015 Included Per Unit - Humidification chamber - Two steam chambers - Three air chambers Technical Specifications - Maximum throughput: approximately 2,500 parts per hour - Suitable for maximum garment turnover, including difficult natural fibres - Steam consumption: approximately 370 kg of steam per hour Electrical and Power - Voltage: 400 V / 50 Hz - Phases: 3N/PE - Power: 15.0 A / 9.0 kW - Branch circuit protection: 16 A Compressed Air - Max. air pressure: 6.0 bar - Connection: 1/4 inch, 6 mm - Pressure range: 4-10 bar Steam - Max. steam pressure: 8.0 bar - Testing pressure: 10 bar - Steam connection: 2 inch - Steam pressure range: 5-8 bar - Steam consumption: 370 m3/h Condensate and Suction - Condensate connection: 1 1/4 inch - Suction connection: 1 x 150 mm and 1 x 200 mm - Noise lev ...

Manufacturer: Ferraro Model: CUD FV Type of Machine : Calender Polishing Machine Find more here - / Contact us at -

Machine 1 - CNC Cutter - Manufacturer: Cuttec - Type: CNC Cutter - Variocut HL - Year of Manufacture: 2021 - Voltage: 230/400V 50Hz - Power: 15 kW - CE marked Machine 2 - Spreading Machine - Manufacturer: Cuttec - Type: SM1 1800 - Year of Manufacture: 2021 - Voltage: 230/400V 50Hz - Power: 3 kW - CE marked Find more here - / Contact us at -

Manufacturer: Boshite Model: TD-100 Type:Quilting Machine Voltage: AC 100-240V Frequency: 50/60 H Find more here - / Contact us at -

Additionally avaiablle BCF PP & PET Neumag 2 4 ✔ 2021 - 10 BCF PP & PET Neumag 6 6 ✔ 2022 - 15 Twisting & Cabling Saurer Volkmann 2021 176 Avg. 3 Twisting & Cabling Saurer Volkmann 2021 176 Avg. 3 Twisting & Cabling Saurer Volkmann 2021 176 Avg. 3 Twisting & Cabling Saurer Volkmann 2022 176 Avg. 3 Twisting & Cabling Saurer Volkmann 2022 176 Avg. 3 Twisting & Cabling Saurer Volkmann 2022 176 Avg. 3 Twisting & Cabling Saurer Volkmann 2022 176 Avg. 3 Heatset Superba TVP 3 S 2021 72 8 Heatset Superba TVP 3 S 2022 72 8 Heatset Superba TVP 3 S 2022 72 8 PP & PET Spinnerets Mono Tricolor 144 144 240 210 360 330 420 420 Find more here - / Contact us at -

2x heads, 15 colors, approx. 1 year old, rarely used; since production has been outsourced, it must be bought out of the existing lease agreement. The model is the MRT 1502-7S. It can embroider 15 colors simultaneously using two embroidery heads. All software is included, as well as embroidery hoops (magnetic and for caps). A heat press is also available for transferring the embroidery designs onto clothing. Find more here - / Contact us at -