other machines and plants used for sale (14,779)

Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible.

A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction ro ...

Big Ass Battery Test Unit The battery storage system has a capacity of 195kWh. It is about 2 years old with very few operating hours. The whole thing comes from a development/test environment and is ideal for energy storage projects, electric vehicles Charging technology, prototyping or parts Extraction. It has just been serviced by Big Ass Battery, including protocol and is therefore immediately ready for use.

2 pieces robust moment bag clamps / bag clamps for bag and big bag filling for safe and fast attachment of a bag ( up to 50 kg ) to a bag nozzle / filling tube, diameter 290 mm, outlet 150 mm Universal Application: Feed, Food, Building Materials, Agriculture · Easy one-handed operation thanks to lever mechanism · Hammered paint grey Bag nozzle diameter 290 mm, outlet 150 mm

An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible.

Five identical industrial robots are available, number of axes: 4, reach: 3139mm, payload: 250kg, weight: 1.45t. With control system, no known defects. An on-site inspection is possible, not under power.

Batch wet mill for the iron-free grinding of mineral suspensions. Lining (Al2O3) completely renewed in 2011. The mill and drive unit (18.5 kW bevel gear motor) are mounted ready for use on a stable base frame. Incl. sealing plug, drain tap / drain strainer and original documentation. Designed for a regrind filling of 3,900 kg and a ball filling of 3,350 kg. There are 2 identical mills available. Available for an extra charge: control cabinet incl. on-site control unit and grinding balls.

Hydraulic power unit in mint condition with accumulator for emergency stop operation for opening/closing 2 roller columns (smoothing unit, double trigger, etc.) unused, documents available

It is basically a Zeiss SEM with a water-cooled column (LEO S420), tungsten cathode and has the following detectors/equipment: SE Detector RE Detector EDX detector Noran System 7 from Thermo Fisher And another for work at low pressure, even for poorly conductive samples. Vacuum-resistant live camera Chamber size Inner dimensions: D152 x W112 x H141cm³ Condition cathode Well, there are still several tungsten filaments available. Vacuum system: Pfeiffer DUO65 rotary vane pump, roots pump + large, magnetically mounted Pfeiffer turbopump

Year of manufacture 1997

Working width: 2350mm, min. slitting knife spacing: 110mm, slot width: 5mm, slot depth range: 0mm-400mm, binding edge area: 45mm, max. material weight: 2000g/m². Documentation available. An on-site inspection is possible.

Qty. 1 Second-hand pallets rack storage system Mfc.: STAMH GROUP Type: 65 Lanes Built: TBA Dim. of pallets: 1.0 x 2.0 x 1.4 m – W x L x H Pallet Weight: 120-600 kg Gravity Roller Conveyor – Rack mounted lane for 3 PP Storage capacity: 195 pallets Total load capacity: 120 900 kg Requested space: 15.25 x 21.56 x 9.05 m – L x W x H Type of forklift truck to be used: Min. working main aisle: 4.4 m Min. reach height: 7.7 m

Horstmann SEW Elevator Cable Winch RA2467Technical data:Frame dimensions: 1380x100x600 mm (HxLxW)Winch diameter: Ø = 450 mm (1420 mm circumference) Steel rope thickness: 10 mmDrive: SEW gear motorElectrical data: 50Hz V380-500, kW 7.5 S1Rope length: 14200 mm (14.2 m)Speed (v m/s): 0.54Pulling force: 11600 N /1160 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: For individual, expert advice, simply get in touch with us.Simply contact us by phone or email.We will be happy to help you plan and implement your projects.We look forward to hearing from you.With kind regardsYour team at Dr. Sonntag GmbH & Co. KG

Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible.

Paint mist extraction system Nestro Lacky E2416 2400x1600 mm 2.6 KW Blower drive is 2.6 KW three-phase explosion-proof 7000 m3/h capacity 400mm drainage nozzle 2 guide blocks 800 mm wide. Is equipped with filter mat / fabric 1500 mm high and paper filter Both ensure very good filtering of the paint mist. On the photo the full filters are still in there, we remove them and also have replacement filters that belong to it. The system is in good condition, the blower housing was packed and therefore still clean, as were the deflector plates. An approx. 8 m long 400mm spiral seam line can be taken along if the collector dismantles it himself. New replacement filters are included. PICK UP ONLY!

1 Wagner Leopard 3570 airless sprayer with air piston drive. It is for hanging on the wall. About 8m of spray hose are included, and a gun with nozzles, filters, etc. For data see type plate Technical data: Gear ratio: 35:1 Max. air inlet pressure: 7.1 bar Max. working pressure: 250 bar Volume flow rate per double stroke: 70 cm³ Max. stroke rate: 60 DH/min Max. flow rate: 4.2 l/min The system was in operation until recently, is well maintained and perfectly cleaned. Pick-up only in 27404 Zeven.

A total of five structurally similar Coriolis mass flow meters Krohne are available, four of which are unused. Transmitter: MFC 400 F, process temperature min./max.: -70°C/150°C, operating pressure range: 5bar-10bar, communication: Profinet, current fluid density: 0.9kg/l, viscosity: 300mPas, temperature: 120°C, max. pressure: 10bar. 1) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-300l/h, max. fluid temperature: 230°C. 2) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 3) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 4) Sensor: Optimass 6000-S10, connection DN15 Tri-Clamp, installation length: 315mm, max. measuring range: 0l-200 ...

A Datron dosing and dispensing system for adhesive and sealing materials is available. Design: gantry design, Y-axis drive: double-sided, travel X/Y/Z: 520mm/650mm/240mm, gantry clearance: 200mm, dosing and positioning speed: 16m/min, repeatability: +/-0.02mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/1950mm, weight: approx. 600kg. Documentation available. On-site inspection is possible.

Scope of delivery: LTH 603.20 mist eliminator with housing + 6 full cone nozzles 405.228.1Y. AR.00.0 + 15 full cone nozzles 461.248.17.00.00.0 + 2 full cone nozzles 490.926.1Y. CG.00.0 + 1 LTV 400.20 Mist Eliminators + 3 461.048.1Y Solid Cone Nozzles. AK.00.0 + 1 mist eliminator LTH 603.30 + 1 oscillating soot blower PS-P + 1 retractable soot blower PS-HB + 1 oscillating soot blower PS-PB + 6 rear suspension + 6 flanges with reduction DN80 – 65 + 6 screw connections DN80 PN63 + 48 screw bolts LM 20x100 + 1 end bearing (88.9) Inst. 2 + 1 end bearing (88.9) Inst. 3 + 1 end bearing (88.9) Inst. 4 + 2 end bearings (88.9) Inst. 5-6 + 2 feed device 600mm Ø19mm + 1 x 50x59x2 seal, Commissioning part + 1 x 89x95x2.5 gasket, commissioning part + 1 x G1"R1 1/4" bleed valve, commissioning part + 1 x R243 stuffing box, commissioning part + 1 x stuffing box, commissioning part + 1 x DN80 PN63 spi ...

Scope of delivery: LTH 603.20 mist eliminator with housing + 6 full cone nozzles 405.228.1Y. AR.00.0 + 15 full cone nozzles 461.248.17.00.00.0 + 2 full cone nozzles 490.926.1Y. CG.00.0 + 1 LTV 400.20 Mist Eliminators + 3 461.048.1Y Solid Cone Nozzles. AK.00.0 + 1 mist eliminator LTH 603.30 + 1 oscillating soot blower PS-P + 1 retractable soot blower PS-HB + 1 oscillating soot blower PS-PB + 6 rear suspension + 6 flanges with reduction DN80 – 65 + 6 screw connections DN80 PN63 + 48 screw bolts LM 20x100 + 1 end bearing (88.9) Inst. 2 + 1 end bearing (88.9) Inst. 3 + 1 end bearing (88.9) Inst. 4 + 2 end bearings (88.9) Inst. 5-6 + 2 feed device 600mm Ø19mm + 1 x 50x59x2 seal, Commissioning part + 1 x 89x95x2.5 gasket, commissioning part + 1 x G1"R1 1/4" bleed valve, commissioning part + 1 x R243 stuffing box, commissioning part + 1 x stuffing box, commissioning part + 1 x DN80 PN63 spi ...

Herding MULTICOATER MCI 55/1 Dosing Unit Manufacturer: Herding GmbH Filtertechnik Model: MULTICOATER MCI 55/1 Year of manufacture: 2018 Type: Dosing device for filter coating Supply voltage: 24 DC V Weight: 70 kg Weight: 130 kg Machine ID: 28696 Machine ID: 28697 CE marking: available Number of units: 2 Location: Kusel

Vacuum tube lifter with a maximum load capacity of 65 kg for various suction cups; currently equipped with the 'single suction cup long', e.g. for pallets, narrow cartons, beams, square tubes and other elongated workpieces. The scope of delivery includes suction cup, hand control unit (BE65-300/500-BEW+RA), lifting unit (JU-65-E-DUMMI), feed hose, vacuum generator (SBB-SBL-ST-VZ/ABS), main switch and (vertical) crane column (SKJ4-65-VARIABEL).

Used Tiede crack detection system in very good condition, industrial quality. System for longitudinal/transverse crack detection with manual or fully automatic demagnetization. Special accessories: UV super light, large area shower, blackout cabin.

Recirculating cooler with 5 kW cooling capacity

A Mitutoyo coordinate measuring machine overhauled in 2023 is available. Measuring dimensions X/Y/Z: 705mm/1005mm/605mm, max. workpiece height: 800mm, table dimensions X/Y: 880mm/1720mm, max. table load: 1000kg, resolution: 0.1µm, traverse speed: 520mm/s, measuring speed: 8mm/s. Machine dimensions X/Y/Z: approx. 1500mm/2000mm/2750mm, weight: approx. 2000kg, control: GEOPAK and CAT 1000 PS. Including various probe trees. Documentation available. On-site inspection is possible.

A Fanuc robot that was mounted on an injection molding machine is available. Axes: 6, payload: 3kg, reach: 700mm, repeatability: +/-0.04mm, control system: Fanuc System R-J3, weight: approx. 180kg, operating hours: approx. 80000. Including control cabinet and operator panel. Documentation available. On-site inspection is possible.

Piston Diaphragm Pump Motor power 5.5 kW Flow rate 6 m3/h Delivery pressure 15 bar The pump was only in operation for 3 years to feed a chamber filter press with vegetable oil

Two Heidelberg folding systems are available. 1) Stahlfolder Heidelberg 56 system, year of manufacture: 2006, flat pile feeder: FFH-56, min. sheet dimensions X/Y: 140mm/1800mm, max. sheet dimensions X/Y: 560mm/900mm, paper weight range: 40g-250g/m², max. stack height: 800mm, max. throughput capacity: approx. 200m/min, buckle plate station: BUH-56, working width: 560mm, folding roller diameter: 44mm. 2) Stahlfolder Heidelberg 66 system, year of manufacture: 2006, min. sheet dimensions X/Y: 140mm/180mm, max. sheet dimensions X/Y: 660mm/1040mm, paper weight range: 40g-250g/m², max. stack height: 1200mm, throughput capacity: approx. 200m/min, working width: 660mm, folding roller diameter: 44mm. Documentation available. On-site inspection is possible.

Magnetic plate for scrap loading

Magnetic plate for scrap loading, socket fehtl