other machines and plants used for sale (19,816)

Single-sided edge banding machine. Year of manufacture: 2011. Electrical supply: 400 V, three-phase, 50 Hz. Rated power: 7.8 kW. Rated current: 18.9 A. Weight: 850 kg. Equipped with chain feed conveyor, upper pressure beam, edge band coil support table, panel support rail, trimming units and extraction hoses. Opening protective hood, digital control panel, manual height adjustment crank and emergency stop buttons. Auction-ID: A1-50699-39

Model: TB85-0ALFUMDG, Operating system: Android 8.0 GMS, Processor: Octa-core, Memory: 4 GB DDR3 RAM, 32 GB eMMC, Expansion interfaces: POGO pin with QC3.0, 14-pin POGO connector for modules, Battery: 8200 mAh replaceable Li-ion battery, Connectivity: 4G/LTE, WLAN 802.11 a/b/g/n/ac, Bluetooth 4.1, NFC, Display: 8\" with Gorilla Glass 3 and GFF touch panel, Durability: IP67, resistant to drops from 1,2 metres onto marble. Auction-ID: A1-50595-32

Mercedes R19 wheels with 235/55/19 & 255/50/19 winter tyres. Weight 80kg Auction-ID: A1-50595-74

Height: 640 - 1130 mm, Width: 900 mm, Depth: 480,0 mm, Extraction outlet position: Top, Extraction outlet diameter: 150 - 125 mm, Plug type: YP-22 (Schuko – round, earthed). Auction-ID: A1-50595-37

Material: Aluminium, 4 mm thick, Height: 58 cm, Length: 115 cm, Width: 50 cm. Auction-ID: A1-50595-40

Veneer splicing machine using hot-melt glue thread. Equipped with metal worktable, feed rollers, thread spool enclosure, thread guides and control panel with ammeter and adjustment dial. Nameplate specifications: - Voltage: 400 V - Phases: 3 - Frequency: 50 Hz - Rated current: 2.2 A Auction-ID: A1-50699-14

Auction-ID: A1-50595-80

Mercedes GLS W167 wheels with 275/50/20 winter tyres. Auction-ID: A1-50595-73

SILENSYS enclosed condensing unit – SILAJ4511Y.FZ1, Refrigerant: R134A - 2.8 kg, Weight: 72 kg, Width: 942 mm, Height: 837 mm, Depth: 654 mm, Power consumption: 2,08 kW, Noise level: 27 dB. DELTA ceiling-mounted evaporator – MCL 30, Rated capacity: 2,5 kW, Weight: 29 kg, Width: 1250 mm, Height: 243 mm, Depth: 1020 mm. Digital control unit also included. Auction-ID: A1-50595-14

Original FoMoCo 7,5Jx18 ET44 wheels with Michelin 275/65 R18 tyres. Weight 80kg Auction-ID: A1-50595-71

Load capacity: Up to 1500 kg, Manual propulsion, Electric lifting and lowering, Single lifting cylinder with double lift. Auction-ID: A1-50595-22

Material: 3,5 mm enamelled steel, Colour: White, Drain at the foot end, diameter: 52 mm. Auction-ID: A1-50595-19

Auction-ID: A1-50699-54

Original Ford 8Jx18 ET55 wheels with 265/60/18 tyres. Weight 80kg Auction-ID: A1-50595-72

Mercedes X-Class R19 wheels with 255/55/19 tyres. Weight 80kg Year 2018 Auction-ID: A1-50595-75

Auction-ID: A1-50699-52

Power supply: 24VDC, Current: 5A. Year 2010 Auction-ID: A1-50595-39

General Description Precision jig milling / jig boring machine manufactured by Lindner, Germany. Designed for high-precision machining of tooling, molds, gauges and precision mechanical components. The machine is equipped with a precision vertical spindle, rotary indexing table and a separate precision operator console for accurate positioning and machining. Technical Details Manufacturer: Lindner Machine type: Precision jig milling / jig boring machine Year: Not confirmed Precision vertical spindle head Large precision T-slot work table Rotary indexing table mounted on the work table Separate precision operator console Micrometer spindle positioning Automatic feed system Original German electrical equipment Coolant system Condition Good used industrial condition. The machine appears substantially complete with precision spindle head, rotary indexing table, separate control console and ...

Technical details Type: Electric motor components Frame size: IEC 200 Configuration: - Aluminium motor housings with cooling fins - B5 flanges - End shields / bearing end brackets - Motor mounting feet - Cooling fans - Stator laminations - Miscellaneous cast motor components Visible markings: - Piede per carcassa 200 destro - Piede per carcassa 200 sinistro - Flangia 200 B5 Application: - Assembly of IEC electric motors - Industrial motor manufacturing - Spare parts inventory - Industrial machinery Construction: - Aluminium die-cast components - Steel stator laminations - Precision-machined mounting surfaces Estimated quantity: - Motor housings: Approx. 250–350 pcs - End shields: Approx. 80–150 pcs - Cooling fans: Approx. 20–40 pcs - Stator laminations: Approx. 15–25 pcs - Motor feet and brackets: Approx. 150–300 pcs - Miscellaneous castings: 100+ pcs Condition: New old stock ( ...

Technical details Type: Electric motor terminal box components Configuration: - Cast aluminium terminal box housings - Terminal box covers - Junction box housings - Cable gland openings - Mounting flanges - Covers with moulded wiring diagrams - Various IEC motor frame sizes Application: - Industrial electric motors - OEM motor assembly - Electrical terminal connections - Spare parts inventory Construction: - Die-cast aluminium components - Precision-machined mounting surfaces Estimated quantity: - Approx. 220–330 cast components Dimensions (largest housing): - Length: Approx. 220 mm - Width: Approx. 180 mm - Height: Approx. 120 mm Weight: Approx. 2 kg per component Condition: New old stock (unused) Observed condition: - Clean castings with no visible corrosion - No impact damage observed - Machined surfaces appear in good condition - Never assembled - Stored indoors Auction-ID: A7-5074 ...

Technical details Type: Electric motor terminal box assemblies Configuration: - Die-cast aluminium terminal box housings - Matching terminal box covers - Threaded cable entry ports - Precision-machined mounting faces - Cover mounting holes - IEC motor terminal box design Application: - Industrial electric motors - OEM motor assembly - Electrical terminal connections - Spare parts inventory Construction: - Die-cast aluminium components - Precision-machined interfaces Estimated quantity: - Terminal box housings: Approx. 12–15 pcs - Matching covers: Approx. 40–60 pcs - Several complete housing-cover assemblies - Additional loose spare covers included Dimensions (largest housing): - Length: Approx. 220 mm - Width: Approx. 180 mm - Height: Approx. 120 mm Weight: Approx. 2 kg per housing Condition: New old stock (unused) Observed condition: - Clean machined surfaces - No visible corrosion  ...

General Description Conventional geared engine lathe designed for precision turning, facing, boring, drilling and threading of cylindrical metal workpieces. The machine is equipped with a geared headstock, manual carriage and tailstock for general machining applications. Technical Details Machine type: Geared engine lathe 3-jaw chuck Tailstock Drill chuck mounted in tailstock 4-way toolpost Threading gearbox Feed gearbox Working carriage assembly Condition Used industrial condition. The machine appears complete with chuck, tailstock, toolpost, carriage and gearbox assemblies. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-30

Technical details Type: Electric motor fan covers Configuration: - Pressed steel fan covers - Ventilation grille design - Central mounting opening - Multiple IEC motor frame sizes Visible frame sizes: - IEC 63 - IEC 71 - IEC 80 - IEC 100 - IEC 112 - IEC 132 Application: - Industrial electric motors - Motor cooling systems - OEM motor assembly - Spare parts inventory Construction: - Pressed steel construction - Grey and black industrial coating Estimated quantity: - IEC 63: Approx. 40 pcs - IEC 71: Approx. 20 pcs - IEC 80: Approx. 20 pcs - IEC 100: Approx. 15 pcs - IEC 112: Approx. 15 pcs - IEC 132: Approx. 35 pcs - Miscellaneous/black covers: Approx. 20 pcs - Total estimated quantity: Approx. 140–170 pcs Dimensions (largest cover): - Diameter: Approx. 400 mm - Height: Approx. 140 mm Weight: Approx. 1.8 kg per cover Condition: New old stock (unused) Observed condition: - Uniform paint f ...

Technical details Type: Electric motor rotor shafts and stator core packs Configuration: - Machined steel rotor shafts - Splined shaft ends - Bearing journals - Keyways and precision shoulders - Laminated electrical steel stator core packs Application: - Industrial electric motor manufacturing - Electric motor assembly - Spare parts inventory - Industrial machinery production Construction: - Precision-machined steel shafts - Laminated electrical steel cores Estimated quantity: - Rotor shafts: Approx. 120–180 pcs - Stator core packs: Approx. 20–40 pcs Dimensions (typical shaft): - Length: Approx. 700 mm - Diameter: Approx. 45 mm Weight: Approx. 12 kg per shaft Condition: New old stock (unused) Observed condition: - No evidence of previous installation - Machined surfaces appear intact - Light surface oxidation from storage only - Stored indoors - Protective wrapping present on stator  ...

Technical details Type: Electric motor fan covers Configuration: - Pressed steel fan covers - Ventilation grille design - Central mounting opening - Multiple IEC motor frame sizes Visible frame sizes: - IEC 63 - IEC 90 - IEC 112 - IEC 160 Application: - Industrial electric motors - Motor cooling systems - OEM motor assembly - Spare parts inventory Construction: - Pressed steel construction - Industrial grey primer/paint finish Estimated quantity: - Small covers: Approx. 60–70 pcs - Medium covers: Approx. 20–30 pcs - Large covers: Approx. 10–15 pcs - Total estimated quantity: Approx. 90–120 pcs Dimensions (largest cover): - Diameter: Approx. 350 mm - Height: Approx. 120 mm Weight: Approx. 1.5 kg per cover Condition: New old stock (unused) Observed condition: - Uniform paint finish - No visible dents or corrosion - Stored indoors - Individual fan covers only Auction-ID: A7-50745-86

General Description Heavy-duty conventional engine lathe of likely Soviet/Eastern European manufacture, designed for turning, facing, boring and threading large cylindrical workpieces. The machine is equipped with a geared headstock, large independent chuck, heavy-duty carriage and manual controls suitable for general machining applications. Technical Details Manufacturer: Not identified Model: Not identified Machine type: Heavy-duty conventional engine lathe Year: Not confirmed Power supply: 380 V, 3-phase, 50 Hz Rated current: 63 A Starting current: 756 A (electrical plate) Large 4-jaw independent chuck (approx. 700–900 mm) 4-way tool post Quick-change gearbox Leadscrew and feed rod Tailstock Electrical control cabinet Condition Used industrial condition. The machine appears mechanically complete with headstock, carriage, tailstock and electrical cabinet installed. Bed ways appear  ...

- Pumping system not included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-36

Technical details Type: Precision measuring equipment lot Configuration: - External micrometers - Large outside micrometers - Precision setting standards - Gauge bars - Dial indicators - Machine alignment tools - Circular setting gauges - Precision inspection accessories - Original fitted wooden storage cases Application: - Dimensional inspection - Machine setup and alignment - Toolroom measurements - Quality control - Industrial metrology Construction: - Precision-ground measuring instruments - Hardened steel measuring surfaces - Wooden fitted storage cases Estimated quantity: - Approx. 25–40 fitted wooden cases Condition: Used Observed condition: - Original storage cases included - Instruments appear well protected - No significant corrosion visible - Complete measuring sets appear present - Dust accumulation from long-term storage - Calibration status unknown Auction-ID: A7-50745-75

Technical details Type: Electric motor terminal box housings Configuration: - Cast aluminium terminal box bodies - Machined cable entry ports - Threaded cable gland openings - Precision-machined mounting faces - Integrated mounting bosses - Multiple IEC motor frame sizes Application: - Industrial electric motors - OEM motor assembly - Electrical terminal connections - Spare parts inventory Construction: - Die-cast aluminium components - Precision-machined interfaces Estimated quantity: - Large box: Approx. 24–28 pcs - Second large box: Approx. 8–10 pcs - Upper carton: Approx. 4 pcs - Lower carton: Approx. 3 pcs - Total estimated quantity: Approx. 39–45 housings Dimensions (largest housing): - Length: Approx. 220 mm - Width: Approx. 180 mm - Height: Approx. 120 mm Weight: Approx. 1.8 kg per housing Condition: New old stock (unused) Observed condition: - Excellent casting finish - No ...

General Description Centre lathe manufactured by TOS Trenčín, model SV18 RA. Designed for precision turning, facing, boring and threading of shafts and other cylindrical workpieces in toolrooms and general machining workshops. Technical Details Manufacturer: TOS Trenčín Model: SV18 RA Machine type: Centre lathe Serial number: 687 Power: 5.0 kW Power supply: 380 V, 3-phase Control voltage: 220 V Rated current: 13.8 A 4-way toolpost Tailstock Quick-change threading and feed gearbox Leadscrew and feed rod Metric, inch and module threading capability Interchangeable change gears included Chip tray and work light Condition Used industrial condition. The machine appears mechanically complete with headstock, tailstock, four-way toolpost, threading gearbox, leadscrew and change gears installed. Cosmetic paint deterioration, oil staining and surface corrosion are visible, consistent with in ...