other machines and plants used for sale (14,414)

An Alpha rubber process analyzer for testing the rheological and dynamic properties of elastomers and rubber compounds is available. Frequency range: 0.1-3000cpm, max. temperature: 230°C, max. heating rate: 1°C/s, max. cooling rate: 0.5°C/s, max. strain: +/-90°, test standards: ASTM D5289/D6048/D6204/D6601/D7050/D7605/D8059. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Including PC with Eclipse software and spare parts. Documentation available. On-site inspection possible.

Table height: 850mm, probing error MPEp: 3.5μm, length measurement error MPEe: 3.0+L/250μm, machine height: 1845mm, electrical connection: four grounded Schuko sockets 220V with 16A protection, power consumption: max. 700VA, spatial temperature gradient: max. 1°C/m, regularly inspected, with computer. An on-site inspection is possible.

A double-sided glass drilling machine Schraml (Lisec-Group) is available. Glass inclination: 8°, max. processing height: 1300mm, max. glass length: 2500mm, max. glass thickness: 40mm, max. drilling diameter: 100mm, speed: 5000rpm, machine dimensions X/Y/Z: approx. 3000mm/900mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible.

Four identical component storage towers Royonic Mycronic are available. Software: STSys SMDSoftware, version: 2.2.2.0, tower firmware: 78, capacity (7 inch reels): approx. 1000, light tower: yes, terminal light: no, external display: no, 2D internal scanner: yes, express unloading: yes, Agilis Pallet: no. Documentation available. An on-site inspection is possible.

A bottom-seal bag/sack welding machine Stiegler is available. Film width: 1050mm, section length range: 90mm-650mm, max. operating cycle: 140/min, max. film web speed: 80m/min, max. roll diameter: 800mm, max. web speed: 60m/min, core diameter range: 76mm. Machine dimensions X/Y/Z: approx. 6000mm/1700mm/1600mm, weight: approx. 3400kg. Including 2 welding bars, punching device and Euro hole punching. The edge control of the machine is defective. Documentation available. An on-site inspection is possible.

Mobile cargo trestle Manufacturer: MSR Maschinen-Stahlbau Reutemann – GmbH Year of Make: 2015 Payload: 8000kg Design: 20,000 load cycles according to EN13155 Load changes performed:

An optical CNC 3D coordinate measuring machine Keyence is available. Display resolution: 0.1µm, repeatability: 2µm, measurement accuracy: +/-10µm, low magnification: 300mm/200mm, high magnification: 70mm/50mm, max. load capacity: 20kg, weight: approx. 30kg. Documentation available. An on-site inspection is possible.

Axes: 6, payload: 50kg, reach: 2061mm, vertical reach: 3578mm, repeatability: +/-0.03mm, weight: approx. 570kg. Documentation available. An on-site inspection is possible.

Design: gantry design, measuring range X/Y/Z: 850mm/1200mm/600mm, measuring accuracy: 2.5µm/L250, repeatability: +/-3µm, machine weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

Wet cutter for roof tiles, lightweight version for use on sloping roof surfaces

Tool set for installing Beftec brackets in flat roofs

Extraction system for removing dust from the ambient air. The motor drives a fan impeller, creating negative pressure. The air is sucked into the machine via the intake manifold and reaches the filter elements. The treated air is then blown out again., Additional title: Workshop dust extraction, Nominal flow rate: 1400 m³/h minimum flow rate: 1,108 m³/h, Power: 2.2 kW, Current: 5 A, Voltage: 400 V, Frequency: 50 Hz, Base construction: on a mobile frame, Features: 140 mm intake manifold; air filter (category C el. lt.); asynchronous motor (manufacturer EMGR)

Insulated ice water tank with two top-entry agitators., Additional title: Insulated, rectangular stainless steel mixing tank, Volume approx.: 8000 l, Length: approx. 2,1 m, Width: approx. 2,1 m, Height: approx. 2,6 m, Material: Stainless steel; cladding galvanised, Base construction: rectangular, Features: Insulation; 2 x agitator; over-flow; cooling element

Additional title: 4 container CIP, Capacity per tank: 3000 l , Number of tank: 4 pieces , Width: 1,3 m, Height: 3,4 m, Weight: 500 kg, Position: vertical, Features: Pressureless tanks, 3 tanks, every with 30 hl, d = 1,2 m, h = 2,8 m,1 tank with 25 hl for fresh water, d = 1,2 m, h = 2,2 m, feeding in of water of the main

Additional title: Control cabinet with touch panel, Voltage: 110-240 V AC, Frequency: 50-60 Hz, Length: 500 mm, Width: 580 mm, Height: 210 mm, Weight: 35 kg, Operation / Control: touchpanel

Malt scale with digital display, Additional title: Continuous flow scale with digital display, Fill sizes: 24 l, Capacity: 300 fills/h, Nominal capacity: 7 m³/h, Voltage: 240 V, Frequency: 50/60 Hz, Compressed air: 5 - 6 bar, Weight: 130 kg

A crate washer for cleaning the outside of bottle crates using spray nozzles., Material: stainless steel, Base construction: on feet

CIP tank with 4 separate tanks for water, lye, acid and disinfectant. The system consists of: - 4 tanks with various fittings - Feed and return pumps - 3 diaphragm dosing pumps - Pipework, pneumatic disc valves - Level sensors, in-line conductivity measurement, full and empty level probes, flow monitors., Additional title: Cleaning system with 4 vertical stainless steel vessels, Volume: 1270 l Caustic tank, acid tank, disinfectant tank, Material: Tanks made of V4A or V2A stainless steel, Features: 4 x CIP tanks, 3 x diaphragm metering pumps, 3 x pneumatic diaphragm valves, feed pump, return pump, 8 x pneumatic ball valves, 3 x full-level sensors, 3 x empty-level sensors, flow monitors, conductivity measurement, level control, switch cabinet

Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m³ - Mixing and equalisation tanks 2, 40 m³ - Mixing and equalisation tanks 3, 80 m³ - Bioreactor 1, 240 m³ - Bioreactor 2, 240 m³ - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m³ - Secondary sedimentation tank 2, 100 m³ - Thin sludge tank, 70 m³ - Thick sludge tank, 90 m³ - Sludge dewatering 1 and 2 - Precipitant tank, 25 m³ - Various process water pumps, Bioreactor capacity 2 x: 240 m³, Operation / Control: Siemens Simatic S7, Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; t ...

A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible.

A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible.

1. Qty. 3 Bell Batch Annealing Furnaces (Pair of bases 1-6) Mfc.: EBNER Type: HOG 180/320 St – H2 Built: 1989 Stopped: 2025 Each pair of bases (units: 1-2, 3-4, 5-6) has one cooling hood and one heating hood. Coil Max. outer diameter: 1,650 mm Max. stacking height: 3,200 mm Hood dia.: 2000 mm Useful dia. (inner hood): 1800 mm Useful height (coil dia. 1540 mm): 3400 mm Useful height (max. coil dia. 1650 mm): 3200 mm Max. base load: 50 T 2. Qty. 1 Bell Batch Annealing Furnaces (Pair of bases 7-8) Mfc.: EBNER Type: HOG 180/230 St – H2 Built: 1989 Stopped: 2025 Coil Max. outer diameter: 1,650 mm Max. stacking height: 2,300 mm Usefull dia. (inner hood) 1800 mm Hood dia.: 2000 mm 2 Protective hoods with inner shell Max. temp. under hood: 750 °C Maximum base load: 35 t 2 Control stations

ALMiG Screw compressor BELT 30-10 | 30 kW | 10 bar | Industrial quality For sale is a powerful and reliable screw compressor from the ALMiG brand (Made in Germany) – ideal for industry, production or larger workshops. Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: BELT 30-10 Year of Make: 2009 Motor power: 30 kW Operating pressure: 10 bar Volume flow: 4.12 m³/min Drive: Belt drive