extruders used for sale (297)

Key data: 40 mm, 40 , 600 U/min

Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading

Key data: 130 mm, 35 , 600 U/min

Material: PE, PP, PS, ABS Details: DC motor, segmented screws and barrels, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors. Control cabinet for heating and motor control (NEW. Siemens S7) Screw Ø: 2x 130 mm L/D: 35:1 Motor: 500 kW (DC) Optional: side feeding, screen changer, GALA underwater pelletizing

Extrusion recycling line as good as new EREMA type "Vacurema" for processing rPET, 700 operating hours, Year of construction 2020, Capacity 600 kg/h, Delivery time: Immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Used first-class renovated and almost brand-new ready-to-use extrusion recycling machines make EREMA, various types, for sale. Offers according to the description of your needs. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Key data: 90

A brand-new extrusion recycling product UMAC (EREMA Group) series READYMAC Type 1109 TVE for processing polyethylene (PE), polypropylene (PP), polystyrene (PS), polycarbonate (PC), and polyamide 6 (PA6), with screen changer type SW RF, for processing printed films. Fully equipped. Capacity up to 450 kg/h, electrics 240/400 volts, 50 heart, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

A brand-new extrusion recycling product UMAC (EREMA Group) series READYMAC Type 1109 TVE for processing polyethylene (PE), polypropylene (PP), polystyrene (PS), polycarbonate (PC), and polyamide 6 (PA6), with screen changer type SW RF, for processing printed films. Fully equipped. Capacity up to 450 kg/h, electrics 240/400 volts, 50 heart, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.

Compact cascade extruder - 1x extruder with 80 mm screw diameter - 1x extruder with 70 mm screw diameter - Vacuum degassing or atmospheric - Control cabinet / control for both extruders - Extrusion nozzle

in very good working condition

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal.  ...

length: . mmwidth: . mmheight: . mmweight: . kgFahrbahrThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and acce ...

Stock No.: 2107 1 used, partially overhauled and function-tested strand granulator with >> Granules Cutting Lengths Adjustment ( SV ) Manufacturer COMAC - Italy Type SG-100 SV Strand inlet width 100 mm cutting rotor width 110 mm, Parallel section rotor with 32 teeth Rotor Ø 200 mm >> strand pellet cutting length adjustment 2 drives: 1x for cutting rotor - 4 kW 1x for feed roller 1.5 kW with STOBER reduction gear Soundproof housing of the pelletizing chamber Visit / test run possible shortly by appointment. We also have matching strand cooling basins, strand blowers and classifying screens available from stock. Further strand granulators and other pelletizing systems/plants available from stock ( water ring - , hot impact and underwater pelletizing )

Key data: 100 , 140

Stock No.2452 1 used, partially overhauled and functionally tested pelletizing line Throughput up to 500 kg/h depending on the material, consisting of: Tamping unit Kreyenborg SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm.-1 screw depth 14 mm Heating capacity approx. 35 kW installed 1x athm. Degassing zone Screen-pack-changer Double piston Kreyenborg K-SWE 160 RS back-flush self-cleaning with screen surface 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. Hydraulic station Granulator with drive 4 kW Water pump 2.2 kW By-pass system, water tank with heating 9 kW installed and heat exchanger BKG granulate centrifuge TWE 300 with drive 3 kW pellet classifier table Control board and Siemens material feed conveying, big-bag filling station � ...

Stock No. 2587 1 used pelletizing plant, functionally tested, Throughput up to approx. 600 kg/h depending on the material, consisting of: 1 volumetric dosage Extruder Plastmachines Type PME 100 Single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backwasher incl. Hydraulics 3 kW Strand head with holes 20 x Ø 3.5 mm Continuous cooling pool 400 x 4000 mm with strand guide rollers Strand extraction Strand pelletizer SG 300 ResoTec control / control cabinet Viewing by arrangement - at short notice More pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration

see PDF attached

olienherstellung =: PVC shrink and PET Line speed: 80 meters/min Final net film width: 4.2 meters Line speed: 80 meters/min Production capacity: 21 tons/day The machine includes: -Automatic turnstile unwinder 2 meters -Automatic turnstile -Winder 4.50 meters -Cooling system -automatic thickness control -automatic control of infrared heating -Automatic inline edge strip handling system -TCU -Controller fan -Cooling tower -Exhaust pipes -Exhaust hood -16 steel core width 4.8 meters -Complete spare parts (package purchased for 280.000 €) Dimensions approx. length 50 m x width 19.0 m x height 5.9 m

pdf attached

pdf attached

see pdf attached

A fully equipped line for the production of nonwovens Spunbond Type YS 2400: Manufacturer: Faré (Italy) Useful width: 2400 mm Capacity: up to 514 kg/h Nonwovens weight: 10-100 g/m2

A fully equipped line for the production of polypropylene yarn type Technorope 1000/100/PP-300: Manufacturer: Sima Srl Useful width of the cutting head: 1000 mm Capacity: up to 300 kg/h, depending on the type of yarn Twister: 16 (with 16 batteries) Yarn types: from 5000 to 120 000 denies

Various Kreyenborg / Nordson double piston screen changers - Continuous screen changer - 1x backwash filter - Immediately available, on request also with control, hydraulic unit. Please let us know your desired capacity and the material so that we can offer you the right filter.

Varex 3-layer blowfilm-extruder Head diameter: 630 mm Screw diameter: 70-90-70 mm( die gap: 2,4) Film width: 1390 – 2580 mm Film thickness: 10-200 my Output: max 480 kg /hour Winding diameter 1200 mm Core diameter 76/150/152 mm Energy: 295 kW/h Treatment: in+outside

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)

Multiple extruders

pdf description attached

according to pdf attached

Extrusion recycling machine EREMA 1514T for processing of CLEAN unprinted polyethylene and polypropylene, WITHOUT DEGASSING, no converting of printed materials. capacity up to approx. 1.100 kg/hr. The machine is refurbiushed in ecellent condition. Auch Folien + Technik e. Kfm. D-73723 Esslingen phone +0049 1577 5329827