blow moulding machines used for sale (167)

SIDEL SBO10- blowing machine, SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity., As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper., After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine:, which consists of:, 1. Preform infeed rails, 2. Preform infeed wheel, 3. Infrared oven, 4. Preform transfer wheel, 5. Blow wheel, 6. Bottle transfer wheel, 7. Bottle evacuation, GENERAL Presentation, 1. Infeed of cold preforms, Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowere ...

Technical Specifications & Performance Data This second hand Kosme KSB 4000 blow molding machine from 2003 is a reliable PET container former designed for consistent performance in beverage production and industrial packaging environments. Optimized for small-format bottles, it delivers stable throughput for high-efficiency operations within a used bottling line. Manufacturer: Kosme Model: KSB 4000 Year: 2003 Category: Blow Molding Machine No. of cavities: 4 Nominal speed: up to 4,800 bph (optimized for 0.33 L and 0.50 L) Bottle formats: 0.33 L, 0.50 L Container material: PET Preform neck compatibility: 1881 and 1810 Included peripherals: preform unscrambler, compressor, chiller, air recovery system Electrical: 400 V, 50 Hz, 68 kW Documentation: manuals available Safety: safety features included Status: ready for operation Advanced Automation & Control Systems Engineered for stable, repe ...

Technical Specifications & Performance Data The Sipa 8/4 is a compact, reliable Blow Molding Machine ideal for small-format PET bottle production within a used bottling line. Built for continuous duty in beverage production and industrial packaging environments, it combines proven mechanical design with essential utilities to support efficient operation. Manufacturer: Sipa Model: 8/4 Year of manufacture: 2001 Category: Blow Molding Machine Nominal output: up to 3,500 bph (bottles per hour) No. of cavities: 4 Bottle format: 0.06 L (60 ml) Primary container material: PET (preform-based stretch blow molding) Preform neck type: Corvaglia e 29/21 Included utilities: Compressor (1), Chiller (1) Not included: Preform unscrambler (0), Preforms tipper (0), Elevator (0), Air Recovery System (0) Condition: In storage Documentation: Manuals available Advanced Automation & Control Systems This second ...

Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph The Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph efficiently delivers continuous production in the bottling sector. Manufactured in 2005, this machine currently operates and, importantly, remains available for on-site inspection until March 2025. Technical Features of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine, model SR8, features 8 cavities for bottle formation. Consequently, this configuration produces 12,000 bottles of 0.5 liters per hour. For larger formats, such as bottles of 1.5 liters and 2 liters, it achieves a production speed of 9,600 bph. Moreover, the 18-81 bottle neck type guarantees compatibility with a wide range of caps and closures, making it adaptable to diverse production needs. Thus, this standard ensures precise sealing and airtight closures.. Main Component ...

A Bekum injection blow molding machine without molds is available. Industry: pharmaceutical, product: plastic bottles, bottle volume: 5ml/10ml, materials: PE/PP. An on-site inspection is possible. Expected to be available from July 2026.

Krones Contiform S8 – PET Blow Moulding Machine (Year 2003) High-performance rotary PET blow moulding machine designed for the production of high-quality PET bottles. The Krones Contiform S8 is a reliable solution for beverage manufacturers and can be seamlessly integrated into existing bottling lines. General Information - Manufacturer: Krones (Germany) - Model: Contiform S8 - Year of Manufacture: 2003 - Condition: Good operating condition - Availability: Immediately available Technical Specifications - Application: PET bottle production - Production Capacity: 14,000 bottles per hour - Bottle Size: 1.5 L - Neck Finish: PCO1881 Machine Features - Designed for high-quality PET bottle production - Suitable for integration into complete beverage bottling lines - Equipped with central cooling system - Air conveyor system available Included Equipment (Delivery Sc ...

Used SIPA blow molding machine 2017 - 18.000 bphTechnical Specifications & Performance DataThis SIPA SFR EVO3 is a rotary stretch blow molding machine designed for high-efficiency PET bottle production in modern beverage operations. As a robust second hand asset for industrial packaging, it delivers reliable output for beverage production lines seeking consistent quality and throughput. The machine features an 8-cavity configuration and supports a broad range of bottle sizes commonly used across water and soft drink applications.Manufacturer: SIPAModel: SFR EVO3Year of manufacture: 2017Production speed: up to 18,000 bottles per hourNo. of cavities: 8Neck finish: PCO 28-1810Bottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsContainer type: Designed for PET bottle handlingBottle diameter (min–max, diagonal): 50–125 mmBottle height (min–max, without neck): 80†...

Year of manufacture 2004 for 5 - 10 litre containers Clamping force: 100 kN Wall thickness control: 64 points Max. product diameter: 115 mm Cavities: 1 x 3 Center distance: 125 mm Machine is in good condition, and available immediately

Extruder: 80 mm Year of manufacture: 1983, completely overhauled in 2002 Control system: Siemens S7 Blow moulding head: 5 litre accumulator head Wall thickness control: 100 points One sprocket on the parallel guide needs to be replaced, otherwise in good condition. The machine has been used for the production of technical parts

Closing frame for a blow molding machine Kautex KB 50 Year of manufacture 1984 Overhauled in 2023 all cylinders overhauled and with new seals. The same applies to protective grilles, guide shafts, shape height adjustments, etc. All mounting threads of mounting plates reworked.

1.0 St. gebr. Blow Molding Machine Manufacturer: Fischer - W. Müller Type: FMB 3-120 Year of Make: 1999 Clamping force: 120 tons Extruder Type: 120/24 WT Storage head: BFKS25 corresponds to approx. 17.75 kg The machine can hold drums of up to a size 200 liters. Video available!

used extruder in good condition. Complete with motor, gearbox and heating bands

used extruder motor 135 kW

Very nice 2003 Uniloy single station with double view-stripe head W.Müller CD125mm Machine never runs in production. Comes from a technical college for training students Current condition is very well and runs perfectly

Machine in perfect condition, immediately ready for use, overhauled 2018/19, Operating h: approx. 6,000 Beckhoff control system Head 160 Single with Viewing Strip and PWDS Video on request

Year of Make: 1986 Clamping force: 40 kN Double station

Year of Make: 1991 Clamping force: 20kN Volume: 1 litre Double station

Year of Make: 1998 Extruder 60/24D incl. integrated test device Double blowing head 85 mm pitch size, incl. bottle discharge

Year of Make: 1999 Clamping force: 80kN Volume: 5 liters

Year of Make: 2004 Clamping force: 60to (588kN) Working hours: 48,930 h Accumulation head - BFKS 6.3 Climbing Unit Max Opening: 1,450 mm Column passage: 900x1200 mm

Year of manufacture: 1989 / 2018 overhauled Single head max nozzle 180 mm PWDS (Feuerherm) Control: Beckhoff Operating hours: since overhaul 2018

Overhauled battery head 12 ltr in very good condition

Doppelkopf W. Müller 1 channel Material: PVC Good condition

Single-station machine up to 8 ltr. Extruder S 90/20D. Single head with viewing strip. With leak tester and conveyor belts. Good condition

Neuweriger Doppelkopf make W. Müller. With WDS and filter

Extruder S 90/24D. Battery head 5 ltr. PLC-Control Blow-CVomand

Extruder S 100/24D. Battery head 12 ltr. Nozzle diameter min/max 160 / 330 mm. Clamping force 62 tons. Max. mold size: length 1,300 mm, width 900 mm. Depth 2 x 250 mm. Opening min / max 500 / 1,400 mm

HESTA HK 453 Year of manufacture 2002 - completely overhauled in 2021 Extruder 45 mm, 22 D Control Beckhoff New quill head, a new wall thickness control and new hybrid pump Denison The machine has been in operation for less than 50 hours since the overhaul in 2021, and in almost mint condition.

A 13-layer blown film line Kuhne for the production of biaxially oriented high-barrier films is available. Film thickness range: 20µm-80µm, max. film width: 1400mm, max. output capacity: 400kg/h, extruders: 13 units, max. die head pressure: 500bar, flex ring die: 250mm/300mm, calibration tools: 200mm/225mm/250mm/280mm/300mm, yield: 80%-90%. Laminating films: sealing layer thickness: 25µm-35µm, printing layer thickness: 25µm-45µm. Monofilms: shrink lid thickness: 23µm-28µm, AF lid film thickness: 25µm-45µm, top and bottom film thickness: 75µm, balloon film thickness: 25µm-31µm. Documentation available. An on-site inspection is possible.

PET machine for items up to 1.5 ltr. Equipped for PCO 1881. Moulds in 500 - 750 - 1,000 - 1,500 ml optionally available. Voltage 400V 50Hz. Power for bottles in 1,500 mL. 21,115 per hour. Machine can be viewed in operation