blow moulding machines used for sale (140)

Extruder S 45/22D. Single head, machine can also be equipped with double or triple head. With external leak tester. Very good condition

overhauled in 2012 and equipped with a new Beckhoff control system with touchscreen. Extruder S 50/22D for HDPE single head with Moog servo valve and WDS. Steffes lekstester is there. Very good condition. Available from stock immediately, subject to prior sale

1 piece new, S 80/24D, for PUR 1 piece little used, S 80/24D, with maddock and mixed part

Clamping force 1800 kN. Extruder S 120/28D. Accuhead 25 ltr with 100-point programming. Die dia min/max 150/450 mm

A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefe ...

A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible.

Battery head 5.5 ltr, overhauled

overhauled battery head 5 ltr

new battery head

Clamping force 600 kN. Extruder 120/24D. Battery head 8 ltr. Strike plates 960 x 800 mm, opening path min/max 600/1300 mm. Mould thickness 620 mm. 380V 50 Hz

Lock cylinders, carriage cylinders, WDS cylinders, holding arms for punching tools, screw S 30/24D, and much more

for production up to 28,000 bottles per hour. Good condition. Can be supplied with mould

for the production of 27,000 bottles per hour. With shape

Single-station machine for containers up to 1 ltr. Extruder S 50/20D. Single head, programmed. 380V 50 Hz. Available now!

For containers up to 30 ltr. Continuous extrusion. Clamping force 30 tons. With waste punch and handover

HS451, built in 1993, Available with 1-fold/2-fold head/3-fold Optionally retrofit to PLC and E-extruder

HW551, Extruder 55mm HDPE Single Head Up to 300cm3

HS451, built in 1993, retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

Year of construction 1982 for bottles up to 1.5 litres Cylinder has a 50 mm screw, The machine will be sold without blow head Good Condition, still under power!

Year of construction: 1991 with double head 70 mm stitch Clamping force: 18 kN Machine is in good condition, and has few operating hours

accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice

10 and 20 ltr for sale. Closure 61 mm

Single-station machine for containers up to 1.5 ltr. Extruder 60/20D with DC motor and Hitachi frequency converter. Double head 100 mm stitch with WDS. Cold separation. Waste punch, old pneumatic valves replaced by Festo valves. No oil or air leaks. Good condition, immediately free

used double head, with WDS adjustment, in good condition. 125 mm center to center, die dia up to 55 mm.

Manufacturer | manufacturer: Hesta Machine Type | machine type: HM 501 Stations | stations: Single Station | Single station Year of construction | Built: 1993 Location | location: UES Clamping force | Clamping force: 40 kN Control Type | control system: Original Hesta Extruder | Extruder: 50/22D Extrusion Head | Extrusion Head: 2-fold head 100mm | Double head 100mm Mold dimensions mm | mold dimensions mm (A length / length x B Breite / width x C Tief/depth): Bottle Volume Max. | bottle volume max.: 2 L Screen Language | monitor language: German / English | German / English Delivery Time | Delivery time: 1 - 3 weeks | 1 - 3 weeks

Single-station machine for items up to 10 ltr. Extruder 6+0/20D. Single head, capped separator. Waste die-cutter. At call

Two-station machine for stacking canisters up to 10 ltr. Year of construction 2000. With PWDS and SFDR. Clamping force 200 kN. With aftercooling stations and needle bubbles. Also included is the conveyor belt for canisters. Good condition

Extruder 65/22D. Battery head 3.7 ltr. Locking plates 600 x 600 mm. Clamping force 630 kN. New Beckhoff control system installed in 2019. Available immediately from stock

HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)