shredders used for sale (338)

Pre-shredder / shredder / chopper Fabr. Piranha for wood and plastic Motor 37 Kw Shaft length 600 mm with 3 x 5 Schneider knife with sieve 35 mm with control

used shredder Manufacturer: BOA Type: ALLIGATOR 550 - 100 Year of construction 2017 Specifications: Drive power: 55 kW Throughput: - 1,5 t/h for fine adjustment, and - up to 6.0 t/h with coarse setting Filler opening: 1,120 Rotor speed: 1,500 rpm Operating voltage: 400 V/50 Hz Insulation class: IP 55 Weight: approx. 5,200 kg

used single-shaft shredder Manufacturer: LINDNER Type: VEGA 1100 L Year of construction: 2013 specifications: Filling volume: 1.7 m³ Working opening: 1,100 x 1,800 mm Rotor length: 1,090 mm Rotor flight circle: 434 mm Rotor speed: 100 rpm. Drive power: 45 kW Pneumatic pusher: 6 bar Weight: approx. 6,000 kg

Hammer mill Working width: 1600 mm Rotor diameter: 1000 mm Drive: 75 kW Application: Shredding of all impact-brittle materials such as - impact-resistant plastics - E-waste -Wood waste - mineral insulation waste (e.g. glass wool, rock wool,...)

machine measurements: -- mmmachine weight: 1.500 kgpower capacity: 30 kWCondition: used,Specification: shredder/Shredding plant with two shredders type: WLK 6 S / 30 V-rotor Weima low and slow speed rotor, and second shredder make: AMIScomplete plant ready for operation, incl. hopper with lidand platform.Special accessories:- automatic star-delta start-up- gear motor with transport screw- lid with limit switch- quick-change sieve- Hopper can be lifted manually- Equipment for underfloor installation consisting of hopper elevation, guard rail, external emergency stop WLK version with sound insulation, sound-insulated lid and front doorTechnical data:- Hopper volume: 0.9 m³- Operating voltage: 3x 400 V- Motor power main drive: 30 kW, 1,500 rpm- Motor power hydraulics: 1.5 / 2.0 kW, 1,500/3,000 rpm- Weig ...

SHREDDER KOMPTECH TERMINATOR 5000 E incl. control cabinet

We offer you a semi-mobile Maier crusher. This used to shred wood, paper, etc. The counter cutting edge was converted with gas pressure cylinders to rise in case of faulty parts (such as Büffel Doppstadt). The machine is mounted on a semi-mobile steel frame to be manoeuvred on the premises. Currently, 90 KW of electrical power are installed. However, the gearbox can absorb up to 250 KW of power.

The shredder breaks large bulky parts made of polystyrene and EPS and similar substances with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by about 65%. Thus, machine is ideally suited for use in industrial and craft companies as well as for the wholesale and retail trade with packaging material made of Styrofoam. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Screen 50 mm: approx. 23 m³/h Depending on the sieve set, a volume reduction of 3 : 1 takes place just by shredding your polystyrene residues. Custom-made products are available on request. VAT will be shown separately on the invoice. Shipping Germany-wide included, islands with surcharge. If you have any questions, please do not hesitate to contact us.

Wood shredders, plastic shredders, garbage shredders, two-shaft shredders, shredders, shredders used Manufacturer: I.S.V.E. Srl Type: 80-80 D Year of construction: 2003 Insertion approx. 1500 x 900 mm Insertion height approx. 1600 mm Drive 2x 9 kW 380 V Dimensions: approx. 2400 x 1800 x 2400 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Tank scissor dentition, scrap scissor bit attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE for MS22 Overall dimensions: 1400 x 1300 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Scrap shear dentition attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS22-MC Year: 2020 suitable for multipunch MS22R Overall dimensions: 1100 x 1100 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...

Headquarters. Edge stiffener extraction

used roll splitting machine Manufacturer: BOA (MBM) Type: RSM Year of construction: 1990 specifications: Roll width max.: approx. 1,800 mm Roll diameter max.: approx. 500 mm Drive power: 3 kW Drive via an electric motor with spindle with task table

Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam  ...

JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal

Alligator scissors Lindemann Alibo The Lindemann Alibo has a mechanical hold-down. The scissor head is protected with a safety basket. Machine On hand Knife length : 760 mm Weight : 4200 kg Mouth width at the tip : 200 mm Cutting capacity: 0.45 kN/ mm² : Ø 70 mm Number of strokes : 20 – 40 cuts/min Dimensions: 4.20 x 1.50 x 1.80 meters Drive: 15 kw Hold-down: Mechanical

The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

Crushers

Crushers

Polystyrene shredders for EPS waste and other materials made of polystyrene – EPS specifications: Electric motor: 5.5 Kw/380 V Speed: 120 rpm. Weight: approx. 1800 kg Dimensions: 2030x1100x1550 mm Throughput: up to approx. 25 m³/hour Insertion opening: 1500×600 mm Granule size: up to approx. 50 mm Throughput depends on the material and size of the sieve. PLANTS and SYSTEMS for SHREDDING EPS WASTE (no longer usable polystyrene expands, polystyrene) – STYRO-CUT® EPS is a hard plastic material. It is mass-reduced and has good mechanical properties. In the EPS block of 1 m³ volume, there is about 98% air in 3-6 million closed cells, which is why EPS works as a remarkable heat insulator. The plant was developed for the processing of smaller quantities of polystyrene, as well as systems for the mass processing of EPS waste. Such granules can be used: in n ...

Styrofoam shredder, shredder for polystyrene Styro-Cut 500 Technical specifications of the Styro-Cut 500 Dimensions (DxWxH): 920 x 1130 x 1640 mm Electric motor: 11 kW/2900 min – 1, 380 V Insertion opening: Ø 420 mm Weight: approx. 300 kg Throughput capacity: up to approx. 25 m3/h depending on sieve size and material Granule size: with standard sieve 9 mm. Production of granules up to 6 mm possible Styro-Cut 500 as an independent unit for manual shredding of the polystyrene Styro-Cut 500 can be used as part of a production line for crushing polystyrene. DS-50 is used as a coarse shredder, which is equipped with the help of a conveyor belt. The material is then conveyed to the Syro-Cut 500 shredder and finely shredded. Uses: – Companies that recycle the waste styrofoam – Construction industry that uses polystyrene as heat and sound insulation – Shops that  ...

STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...

Mixer, hammer mill, crusher, glass crusher, used Manufacturer: EHINGER IMPIANTI Type: MUD 89 Year of construction: 2003 Engine SIEMENS 45 kW 1475 rpm 400/690 V Reduction with V-belt approx. 4,3:1 Total dimensions: approx. 2800 x 1700 x 2000 mm The mill was planned for the simultaneous grinding and separation of materials with different grinders e.B fragile and tough fractions. It was part of a glass recycling plant in which foam glass gravel was produced. We sell the complete plant with belt ovens, cup plants, silos, crushers and mills.

Two-shaft shredder KS 1000/2 INDIVIDUAL - ADAPTABLE - ON YOUR RIGHTS Product information The 2-wave shredder KS 1000/2 is a powerful shredder that has a completely mechanically machined, solid grinding chamber. It is composed of 4 parts which are completely plugged into each other and screwed together, this gives an enormous stability and is very maintenance-friendly. The machine is powered by 2 high-performance electric motors that drive hexwaves running against each other via high-quality and robust planetary gearboxes 2. The hexagonal shafts can be equipped with individually made cutting discs of different thicknesses. The grinding chamber of the KS 1000/2 is double protected by wear plates and wear rings and is therefore completely armoured against wear. specifications: -Cutting room: 1000×600 -Drive: 2x15kW -Speed per shaft: 16.5 rpm -Advantage: Constant torq ...

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Two-shaft shredder Drive 37.50 kW

XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!