shredders used for sale (327)

Model: ARJES VZ 850 DK, Type: Two-shaft shredder, Year of manufacture: 2017, Operating hours: 4,200 h, Motor: Volvo Penta diesel, about 565 kW / 768 hp, Self weight: approx. 26,000 kg, Dimensions (approx.): 8,800 × 2,900 × 3,200 mm (L × W × H), Shredding system: Two-shaft universal shredder, Areas of application:, - Used timber (A1–A4), green cut, - debris, - Mixed waste/tires, model: ARJES VZ 850 DK, Type: Two-shaft shredder, Construction year: 2017, operating hours: 4.200 h, own weight: approx. 26,000 kg, Shredding system: Two-shaft universal crusher

· Machine type: Impact crushing plant, · Model / Type: Remax 1106/11 E/D, · Year of construction: 2016, · Operating hours Crusher: approx. 8,000 h, · Engine operating hours: approximately 10,000 hours, · Breaker type: SBM 11/11/4 RHS, · Manufacturer: SCANIA, · Inlet opening: 1.040 × 725 mm, · Rotor size: 1.040 × 1.060 mm, · Motor: diesel, · Manufacturer: SCANIA, machine weight: ca. 39 t

Basic equipment: Central axle trailer chassis for 80 km/h Brake system with ABS according to EC directive 50 mm EC towing eye, clip-on shoe Tyres 285/65 R 22.5 Permissible total weight 19,000 kg Mercedes-Benz OM 460 LA engine, 375 KW at 2,000 rpm. Euro Mot III B emission standard Load-dependent control of the material feed incl. automatic scraper floor reversing Fuel tank 600 liters Radio remote control complete hydraulic drive hydraulic support legs Separate drive feed roller/scraper floor "TwinDrive" Paintwork RAL 2011 deep orange Condition of the machine The machine is in a technically and visually good condition and ready for use. New diesel engine at 10,310 hours! Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects This is not a binding offer. Subject to prior sale and technical  ...

• Year of manufacture: 2020, • Operating hours: about 2,200 h, • Rotor: Diameter 860 mm, Width 830 mm, • Drive: Direct drive via coupling, • Crusher box: 4 impact bars, 2 impact plates, • Rear leg unit (in RS): 2.44 m × 1.2 m (8 × 4) with oversize backfeed, • Task opening: 860 mm × 720 mm, • Transport weight: approx. 30 t, • Application: concrete, asphalt, construction debris and natural stone, Task funnel, • Hopper capacity: 2.6 m³, • Task height: 3.0 m, • Width at the back: 2.0 m, • Sieve area: 1,080 × 810 mm, • Year of construction: 2020, • Operating hours: approx. 2,200 h, • Drive: Direct drive via clutch, • Crusher box: 4 strike bars, 2 impact plates, • Transport weight: approx. 30 t, • Funnel capacity: 2,6 m³, • Task height: 3,0 m, • sieve surface: 1.080 × 810 mm

• Model: Lindner Urraco 95 DK, • Year of construction: 2021, • Operating hours: 7,230 h, • Engine: Scania V8 Diesel, 770 HP, • Drive: chain track with rubber pads, • Application: High-performance shredder for wood, trash, plastics, green waste, and root stocks, Including accessories, • 2 sentences shafts one used and one armored, – Suitable for wood, waste, plastic, green waste, and root stumps, – Both sentences are armored and ready for immediate use, • Model: Lindner Urraco 95, • Year of construction: 2021, • Operating hours: 7.230, • Drive: Tracked drive with rubber pads

Year of manufacture: 2021, • Betriebsstunden: 3.200 h, • Weight: approx. 37.5 tonnes incl. post-screen unit, • Engine: Cummins L9 – Stage V, • Post-screen unit: 1-deck incl. oversize return conveyor, • Wind sifter for oversize material, • Radio remote control, • Hopper extensions (8 m³), foldable, • Overband magnet, hydraulically liftable and lowerable, • Water pump for dust suppression incl. spray system, • Staubunterdrückung am Ablassband – Feinstaub, • SBM remote service CRUSH CONTROL including GPS

model: VB 750 D, Serial number: 110/667, Construction year: 11/2008, drive: diesel, engine speed: approx. 2,100 RPM, operating hours: 6.090 h, State: Used, operational, Availability: immediately, Working length: 2.000 mm, Total length of the shafts: 2.348 mm, length: approx. 7,500 mm, width: about 2,500 mm, height: about 3,000 mm, own weight: approx. 20 t, Motortyp: 2.348 mm

Woodzilla BBT 400 Drum Chipper Year of manufacture: 2023 Engine: Deutz 75 hp diesel Max. trunk diameter: 32 cm Height of inlet opening: 320 x 500 mm 360° machine slewing ring Length of feed table: 1300 mm Crane type: Z-Kraan BenTele -Crane reach: 5500 mm -Telescopic: 1100 mm Radio remote control Chassis: Tandem axle Speed up to 80 km/h Weight: 3500 kg

fire: Taurus, model: C872HD, Year of manufacture: 2010, box length: 7.0 meters, Box / Bale section: 900 x 600 mm, Pre-compression device: Sheet pre-compressor, Shearing force: 800 tons

fire: SCM Technology, model: CM 1000 Mobile, Year of construction: 2001, Length: 9990 mm, Width: 2550 mm, box: 6600 mm, Engine: Diesel engine, Cutting: 900 x 800 mm, General conditions: working, Cutting force: 1000 tons, Weight of machine: 39 t.

Wood chippers, used

Very good condition four-shaft shredder UNTHA RS-30 The machine is located in a container with a discharge belt/articulated belt as a chain belt conveyor. Easy to transport, can be moved with a hook dispenser. Easy access to the container, wide inspection door. A very nice facility in a well-kept condition First Hand Machine! Operating hours only: 4,307 h Year of manufacture: 07.2019 Power: 2 x 11 kW Cutting opening L x W 420 x 560 mm Knife width: 18 mm Built-in strainer: Ø mm Electrical cabinet : complete with control Funnel Discharge belt Containers

ID3713 SCS 10.920 hours/hours Mobile Scrap Shear Mobile scrap shears

Lindner Jupiter 3200 low-speed single-shaft pre-shredder incl. hydraulic unit and control cabinet Mileage: 54,000 BH Year of Make: 2008 Machine was regularly serviced and repaired Application: Fragmentation of commercial and. industrial waste,

IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...

The BBT 400 Woodzilla is a 360° swivel, compact, Powerful, mobile drum chipper with aggressive feed, built on truck trailer chassis. Technical data Drive: Diesel, Deutz TCD 3.6, 100 KW (136 HP), Stage 5 Feed: 320 x 500 mm Chopping drum: 400 x 500 mm, 4 knives Trunk diameter max.: 32 cm Length of feed table: 1300 mm Outrigger: 4-fold hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chippers and cranes Pendant towing eye: 40 mm Brake: Air pressure brake, Duomatic 2 additional feed rollers Radio remote control for chippers and cranes The machine is in mint condition. Location: NRW Availability: by arrangement Warranty: The machine is stored in the condition existing at the time of handover. sold. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.

• Brand: EUREC, • Model: Z85, • Type: Double-shaft crusher on tracks, • Year of construction: 1999, • Availability: immediately, Weight: approx. 32 tonnes, • Shredder mouth width: 2.30 m, • Shredder mouth length: 1.80 m, • Shaft length: 1.85 m, • Hopper length: 5.40 m, • Hopper width: 2.50 m

• Brand: C.M.I, • Model: BF 4000, • Serial No.: 0046, • Year of construction: 2006, • Operating hours: approx. 4,500 h, • Weight: 62 t (without accessories), • No-load shaft speed: 3 rpm

height: 3.600 mm, With conveyor belt: 15.200 mm, Engine: Volvo Penta

model: JLSS2000-#19, • Year of manufacture: 2022, • Operating hours: 35 h (demo machine), • Main power: 2 × 90 kW, • Gearbox type: #119 planetary reducer, • Shredding cavity: 960 × 1430 mm, • Rotor speed: 6–8 rpm, • Working capacity: 15–25 t/h

Mercodor shredder ZM 44 with a cutting space of 600x380 mm and 7.5 kw drive. Complete ready-to-use machine with large base.

used shredder Manufacturer: JENZ Type: AZ 660-168-EL-200kW Year of Make: 2009 Specifications: Insertion opening: approx. 4,500 (3,500 + 1,000) x 1,500 mm Drive power: 200 kW Capacity: approx. 200 m³/h Passage: approx. 660 mm Machine dimensions: approx. 11,250 x 8,000 length x width Machine weight: 18.2 t incl. frame, leak belt and overbelt magnet with bracket More information will follow. Machine will be available around February 2026.

Crushing plant Husmann HL Uni 7.5 BJ 2024

Pusher force: 120 t, Open box dimensions: 5000 x 2400 mm, Bale size: 800 x 600 mm, Engine: Electro, Engine power: 90 kW, Year of construction: 2011, Hydraulic: Parker Pumps and Valves, Operating hours: 7500 h

Komptech Terminator 5000 SD Category: Garbage Shredders Specification: Category: Universal Waste Shredder Serial / reference number: 481148 Power: 446 hp / 328 kW Weight: 27 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: Terminator 5000 S Diesel engine: CAT C13 Tier 4 Final/Stage V F-Crushing Unit Armoured rollers – new Sickle teeth Hydraulically adjustable cutting gap 0-45 mm Overbelt magnet Central lubrication Remote control

Komptech Crambo 6200 E Direct Category: Wood & Green Waste Shredder Specification: Category: Stationary Twin-Shaft Shredder Serial/reference number: 495005 Power: 280 kW Weight: 17 200 kg Emission class: electric drive In need of repair Equipment and description: Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket

Komptech Crambo 5200 Direct (New) Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447242 Power: 328 kW/446 hp Weight: 27 300 kg Emission class: Tier 4 Final / Stage V Equipment and description: 4472423 Axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)

Komptech Crambo 5200 Direct Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447184 Power: 328 kW/446 hp Weight: 26 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: 3-axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)

fire: SCM Technology, model: CM 1200 Mobile, Year of construction: 2010, Length: 11.000 mm, Width: 2.700 mm, box: 8.000 mm, Engine: Diesel engine, Cutting: 1000 x 900 mm, Stamper: 1 x 200 tons, General conditions: working, Cutting force: 1200 tons, Weight of machine: 53 tons

Planetary Gearbox PCEF53.5-X1 New For Doppstadt DW2560B, DW3060 standard, mobile & stationary Not suitable for Biopower models (42 teeth on the roller)! Fully assembled with output flange and driver