saws used for sale (1,291)

cutting diameter: 255 mmdimensions of saw-band: 2750 x 27 x 0,9 mmcutting width: 200 x 320 mmcutting speed: 20 bis 80 m/min: 125 mm: 125 x 125 mm: 195 mmImpact energy: 350 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 290 Kgdimensions: 1,1 x 0,8 x 1,75 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete with 5x Phantom 2455 x 27 x 0.9mm, Lying in 3 boxes Auction-ID: A1-43479-216

cutting diameter: 235 mmdimensions of saw-band: 2645 x 27 x 0,9 mmcutting width: 280 x 190 mmcutting speed: 45/90 m/min: 120 mm: 120 mm: 190 mmImpact energy: 170 mmconnected load frequency: 400 Volttotal power requirement: 1,1 kWweight of the machine ca.: 290 Kgdimensions: 1,2 x 0,8 x 1,2 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 510 mmcutting diameter: 150 mmcapacity 90 degrees: flat: 450 x 150 mmcapacity 90 degrees: square: 150 mmturning speeds: 29 / 58 m/min.total power requirement: 4,2 kWweight: 1,55 trange L-W-H: 1,8 x 1,7 x 1,7 mmLong-cut cold circular saw, semi-automatic- with miter adjustment left 50°, right 60°- digital cutting angle display- hydraulically adjustable feed speed- hydraulic workpiece clamping- 4 spare saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,59 tdimensions: 1,9 x 1,4 x 1,8 mHydropneumatic Fully Automatic• Mitering Left/Right• Bevel cuts up to 45° (shifter) a. b.• Pneumatic double clamping device• Pneumatic vertical clamping device• Integrated coolant spray systemMPS control:• Save cutting start/end position• Display of power consumption, piece count, cutting time, etc.• Adjustable water cooling• Cutting pressure regulatorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-43971-121

Double mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable - Quick-release vise - Massive, large material support - Automaticcooling Cutting range at 90 degrees: around 255 mmCutting range at 90 degrees: square 240 mmCutting range at 90 degrees: rectangular 300 x 180Saw blade length 2,765 x 27 x 0.9 mmTable height 950 mmBelt speed 35 + 70 m/minTotal power requirement 1.5/1.8 kWMachine weight approx. 0.42 tDimensions approx. 1.23 x 1.7 x 1.75 mCondition: New Auction-ID: A7-44032-421

KASTO PKS 140 — Datasheet FeatureValue Blade diameterØ425 mm (HSS) Cut (round)Ø10–140 mm Cut (square)10×10 →125×125 mm Cutting (flat B×H)140×125 mm Max Depth (HSS)~300 mm Feedrate 16–600 mm/min (programmable) Inlet speed5000 mm/min Blade motorHSS 10.0 kW / HM 29.0 kW HSS cutting speed6–70 m/min · HM 80–150 m/min Max. tighteningPrinc. 2200 daN · Advance 1400 daN Hydraulics3 kW Cooling pump.25 l/min · 0.1 kW Bearing height950 mm Precision power supply±0.05 mm/300 mm Conveyor length: 5400 mm. Safety light bar included. Auction-ID: A1-43691-238

Sawblade width max.: 120 mmWeight: 350 kgMotor output: 1,3 kWWINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-ABPNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness.Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding.Technical specifications:- Band Saw Width 15-120mm- Tooth pitch Max. 60mm Tooth depth 0-30mm- Tooth forms PV,NV,KV,PU,NU- Hook angle -10° to +30°- Feeding rate 0-90 teeth/min.- Motor quantity 2- Grinding wheel motor – 1.1kW, 1400 r.p.m.- Gearbox motor double-rev. – 0.55kW, 1400 r.p.m- Grinding wheel diameter Ø250mm- Grinding wheel bore diameter Ø20mm- Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch)- Operating voltage 400V, 3Ph, 50-60Hz- Total power ~1,3kW- Dimensions 80120175cm- Net/gross weight 350/375kgPNK-AB  ...

Band saw with- swivelling table- foot switch- machine light- IDEAL welding deviceRoller diameter 500 mmProjection 490 mmWorkpiece height 220 mmTable size 600 x 600 mmSaw blade length 3350 mmSpeed infinitely variableMachine weight approx. 0.4 tDimensions approx. 1.2 x 0.8 x 1.95 m Condition: untested (6) Auction-ID: A7-44032-443

Disassembled, lying on a pallet Auction-ID: A1-43479-219

Disassembled, lying on a pallet Auction-ID: A1-43479-218

Underfloor aluminium circular saw - hydropneumatic semi-automatic pneum. Workpiece clamping devicesaw blade diameter 420 mmCutting range at 90 degrees: around 130 mmCutting range at 90 degrees: flat 160 x 100 mmCutting range at 45 degrees: around 110 mmCutting range at 45 degrees: square 130 x 80 mmSpeed 3000 rpmMotor power 2.0 kWTotal power requirement 2.0 kWMachine weight approx. 190 KgDimensions L x W x H 3.0 x 1.0 x 1.3 m Auction-ID: A7-44032-406

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-43970-121

MEP SHARK 310 SX Metal Cold Circular Saw – Built in 1988 For sale is a robust metal cold circular saw from the Italian quality manufacturer MEP (pergola, Italy), model SHARK 310 SX. The machine is ideal for precise cuts in steel, tubes, profiles and solid material. Thanks to the swivelling saw bracket, mitre cuts are also possible without any problems. The solid construction ensures high stability and long-lasting usability – typical for older industrial machines of this generation. Technical data • 3-phase asynchronous motor • Power: 1.5 / 1.8 kW • Speed: 1,400 / 2,800 rpm • Voltage: 380 V • Degree of protection: IP44 • Year of Make: 1988 Facilities • Manual saw bracket • Mechanical vise • Swivel miter area • Coolant connection • Stable machine substructure The machine shows signs of wear and tear typical of its age, such as paint chipping and slight  ...

Tested for proper operation hydraulic lifting and lowering Double-sided miter Infinitely adjustable cutting speed and power supply equipped with cooling pump Auction-ID: A1-42356-33

Hydr. hacksaw with:- Coolant device- Emergency stop deviceCutting diameter 320 mmSaw blade length 535 x 40 x 2.0 mmCutting range at 90 degrees: square 300 mmCutting range at 90 degrees: flat mmStroke rate 45 - 62 - 90 - 125 stroke/minTotal power requirement 3.0 kWMachine weight approx. 0.35 KgDimensions L x W x H 1.4 x 1.4 x 1.2 m Auction-ID: A7-44032-451

MEP SHARK 330CNC FE Automatic Band Saw (2001) Description: MEP SHARK 330CNC FE automatic band saw, designed for precise metal cutting. Robust machine built in 2001, ideal for CNC automation on the shop floor. Dimensions: 970 x 2,620 x 1,800 mm Weight: 1,200 kg Blade: 3,320 x 27 x 0.9 mm – tension 70 bar (900 kg) Key features: Hydraulic vise with automatic bundle clamping Engine power: 1.8 / 1.5 kW Cutting speeds: 20–45 m/min & 35–90 m/min (dimmer) Hydraulic pressure: 25 bar (clamping) / 20 bar (cutting and returning) Power supply: 400V / 50Hz – max power 3.3 kW Included equipment: Roller tables, lubrication pump (11 L/min) Condition: Perfect working condition with slight cosmetic wear. Sale: Ready for immediate use. Auction-ID: A1-43760-41

cutting diameter: 320 mmsaw band length: 3400 x 27 x 0.9 mmcapacity 90 degrees: flat: 320 x 400 mmcapacity 45 degrees: flat: LI 320 x 280 mmcapacity 45 degrees: flat: RE 320 x 260 mmcapacity 60 degrees: flat: RE 320 x 140 mmband speed: 35 + 70 m/minwork height max.: 930 mmvoltage: 400 Vtotal power requirement: 2.67 kWweight: 950 + 250 kgrange L-W-H: - mm well-maintained condition () current new price incl. accessories ~ 40.000 Euro special price on requestEquipment:- electro-hydraulic vertical mitre bandsaw- with large cutting range and small footprint- Robust material support table- miter cuts are carried out fully automatically electro-hydraulic miter adjustment left right- Up to 99 cutting programs- Central operation of all machine functions from the front- Loading also possible from above- Precise positioning thanks to accurate measuring system- electro-hydraulic miter adjustment lef ...

Machine type: Semi-automatic band saw Manufacturer: Knuth Werkzeugmaschinen GmbH Model: HB 500 C Serial number: not legible Voltage: 380 V / 50 Hz Motor power: 5.5 kW Coolant pump power: 0.25 kW Cutting data: Cutting capacity (square, 90°): 500 x 500 mm Cutting capacity (round, 90°): 500 mm Cutting speed: 45.69 m/min Saw blade: Blade length: 5800 mm Blade width: 41 mm Blade thickness: 1.3 mm Equipment: Design: 2-column frame Table: Flat table Feed: Variable feed Vice: Hydraulic vice Guides: Adjustable blade guides Stop: Manual stop Coolant system: Yes Dimensions and weight: Overall dimensions (L x W x H): 2800 x 1300 x 2000 mm Own mass: approx. 1900 kg Condition: Used, functional Remarks: CE marked Auction-ID: A7-43819-6

: neu : ca. 10 Wochen ab Auftrags : Italien : 12680 €: 243.46 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 350x140 mm: rund 230 mm, quadrat 200 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 830 mm: 1600 mm: 1550 mm: 1750 mm: 460 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipped with folding base and complete with accessories Auction-ID: A1-42628-134

Auction-ID: A7-43450-6

Auction-ID: A7-43450-18

Auction-ID: A7-43450-55

Auction-ID: A1-42628-99

Auction-ID: A7-43450-5

Auction-ID: A7-43450-17

: neu : ca. 10 Wochen ab Auftrags : Italien : 58000 €: 1096.2 €: Schwenkrahmen : 3120 x 27 x 0,9 mm: 15 - 101 m/min: 280 mm: 240 mm: 310 x 240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1,5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 5150 mm: 3200 mm: 1950 mm: 5000 x 2200 x 1900 mm: 2150 kgCNC control with 7", touchscreen for the following functions:Feed length, workpiece count, and automatic saw frame rotation for frame adjustmentAutomatic feed 3000 mm / strokeVariable cutting pressureMachine with infinitely variable speedCoolant systemMotorized chip brushChip conveyorAutomatic saw blade breakage monitoringHydraulic vicesRecommended max. diameter of solid material in automatic mode: 150 mmOperating manual in German or EnglishOPTIONS:Hydraulic bundle clamping device, micro-spray device, variable clamping pressure,10", s ...

Auction-ID: A1-43330-21