saws used for sale (1,291)

cutting diameter: 260 mmband length: 450 x 40 x 2 mmcapacity 60 degrees: square: 240 mm: 260 x 180 total power requirement: 2,0/2,6 kWweight of the machine ca.: 1,4 tdimensions: 2,1 x 1,7 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mmband length: 535 x 40 x 2,0 mmcapacity 90 degrees: square: 300 mmcapacity 90 degrees: flat: mmcutting speed: m/minno. of strokes: 45 - 62 - 90 - 125 Hub/mintotal power requirement: 3,0 kWweight of the machine ca.: 0,35 Kgdimensions: 1,4 x ,4 x 1,2 mHydraulic bow saw with:- Coolant system- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A3-40494-5147

Pick-up possible in the following period: 27.02.2025 from 09.00 to 16.00 Saw blade length: Between 4000 mm and 6000 mm, depending on the machine and model. Maximum cutting width: About 600 mm to 1000 mm, depending on the configuration. Saw blade speed: Variable, usually between 20 and 100 m/min. Motor power: 5 kW to 15 kW, depending on the specific application and model. Weight: Can vary widely, typically between 1000 kg and 3000 kg. Dimensions: Depends on the machine, usually large enough to handle larger workpieces. Auction-ID: A7-44592-9

Equipped with: IMET VTF 500 SHI-E vertical metal band saw, semi-automatic vertical band saw, hydraulically driven, with electronic control panel, mitre cuts from 0° to 45° left and right, hydraulic prestressing clamp with quick start, integrated with the rotation of the saw frame with simple stops at 0°, 45° left and 45° right, graduated plate for reading different angles, saw frame on hardened and chromed guides, Saw guides with carbide pads, additional bearing for saw blade alignment, electronic frequency converter for variable saw blade speed and motor with additional servo ventilation, control device for the correct positioning of the saw blade, saw blade tension 2100 kg/cm², with microswitch for control of the saw blade tension, cutting capacity: round up to 330 mm, square up to 330 mm and rectangular up to 300x500 mm. Auction-ID: A1-41987-6

Pick-up possible in the following period: 27.02.2025 from 09.00 to 16.00 Serial No.: 4317110005 Maximum file length: 230 mm Maximum lifting height: 120 mm File spindle speed range: Variable, with infinitely variable adjustment Drive power: Typically around 0.5 to 1.5 kW Power supply: 400 V, three-phase current Condition: unchecked Auction-ID: A7-44592-51

Auction-ID: A1-41987-82

Dust extraction, Typhoon, 380v. Auction-ID: A1-41987-88

Dimensions of the saw blade 300 x 3.4 x 32 mm Cutting range – at 90° // Around 90 mm Square 80 mm Pneumatic vises Automatic material feed position-controlled Single stroke up to approx. 1000 mm Multiple strokes swivel control panel with CNC control mep Bj der Säge 2010 Bj Magazine 2013, this was specially equipped with a transfer station The system can be loaded, adjusted, then run and the workpieces can be fed into a magazine, e.g. on a table. The automatic feed has 1000mm, the length can be adjusted from a few mm to several meters. from foundation, dismantling and loading by the buyer Auction-ID: A7-40841-11

Equipped with: WISENT 530HA Semi-automatic Metal band saw, year of construction 2020, double mitre (left and right swiveling), voltage 3Ph / 400Volt, motor power 2.2kW, cutting speed variable 20~80 m/min, clamping opening 545 mm, coolant system, mitre device L+R 45 – 0 – 60°, dim. saw blade mm. 3,770 x 34 x 1.1, weight approx. 700 kg, capacity round 90° 355 mm, square 90° 300 x 300 mm, rectangle 90° 490 x 300 mm, round 45° L 290 mm, square 45° L 250 x 250 mm, rectangle 45° L 250 x 250 mm, round 45° R 350 mm, hydraulic clamp, infinitely adjustable saw feed, automatic saw arch lift with height adjustment and coolant installation, The machine is suitable for heavier and continuous sawing up to Ø 355mm. Auction-ID: A1-41987-7

cutting diameter: 450 mmsaw band length: 6600 x 41 x 1,3 mmtable height: 800 mm: 450 mm: 450 mm: 450 x 270 mmworkpiece weight: 15 - 95 m/min: 7,5 kWwork height max.: 3000 kgconnected load: 3750 x 1400 x 2100 mmControl: NEW PRICE ~ 40.700 EUROvery good conditionSemi-automatic bandsaw, two-column guidedEquipment:- hydraulic vice- infinitely variable cutting speed- chip conveyor- line laser- driven chip brush- coolant device- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Operation not tested! Auction-ID: A1-41987-77

Equipped with: DoALL 2013-V vertical band saw – Industrial Version (1996), machine is equipped with integrated welding and grinding device for welding and finishing saw bands, allowing for its own saw band production and repair, connection: 400V – 3~ – 50 Hz, saw band length: 3912 mm, welding machine integrated, grinding device integrated, adjustable belt speed, solid cast iron table, infinitely adjustable power supply, belt width capacity 3.2 – 25.4 mm, motor power: 2 HP, belt speed low position: 9.1 – 97.5 m/min, belt speed high position: 167.6 – 1676.4 m/min, belt tension manual, machine dimensions (W × L × H): 1422 × 1118 × 2032 mm, material feed height: 991 mm, machine weight 567 kg Auction-ID: A1-41987-11

Hydr. hacksaw machine - Coolant device - 2 speeds Cutting diameter 260 mm Saw blade length 450 x 40 x 2 mm Cutting range at 60 degrees: square 240 mm Cutting area at 90 degrees: rectangle 260 x 180 Total power requirement 2.0/2.6 kW Machine weight approx. 1.4 t Dimensions L x W x H 2.1 x 1.7 x 1.0 m Auction-ID: A7-44032-609

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

cutting diameter: 220 mmcapacity 90 degrees: square: 220 x 220 mmturning speed range:: 20 - 140 m/minsaw band length: 3720 x 34 x 1.1 mmheight of material-table: 825 mmcoolant capacity: 80.0 ltotal power requirement: 2.5 / 3.5 kWweight of the machine ca.: 1500 kgrange L-W-H: 2350 x 2050 x 1500 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=joc0EbemYC8Equipment:- electro-hydraulic band saw - FULLY AUTOMATIC- for sawing hollow profiles and solid materials made of steel, stainless steel,. tool steel, non-ferrous metals and plastic- control panel on the front right including button for manual operation (setup/individual cut)- electro-hydraulic material clamping- stepless cutting speed .. 20-140 m/min.- electro-motor chip conveyor- manual adjustment of the material feed range via handwheel including analogue value display- automatic height adjustment of the saw fra ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 11640 €: 223.49 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm: 1650 mm: 1200 mm: 1900 mm: 400 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.Optional equipmente: adjustable vice pressure EUR 330,--The data for this ad was created with ModulMWS - the software solution of Lo ...

cutting diameter: 300 mmsaw band length: 3900 mmtotal power requirement: 3 kWweight of the machine ca.: 0,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Function:Semi-automatic metal band saw with mitre adjustmentCutting diameter (round): approx. 250 mm at 90°Cutting range (flat): approx. 280 x 200 mm at 90°Cutting range (square): approx. 230 mm at 90°Including: 2 x conveyor belts, dimensions: 232 x 38 , 118 cm, 500 cm x 52 x 112 (L/W/H) Auction-ID: A1-43917-14

Auction-ID: A1-43301-113

Auction-ID: A1-43301-185

Automatic Wave SawSaw Blade 315mmMax. Shaft Diameter 90mmSpeeds 9 - 45 rpmMotor 3,0KWSee pictures Condition: untested (6) Auction-ID: A7-44325-567

Machine number: 70489, power requirement min: 4.8 kw, drive saw blade: 3.0 kw, saw blade dimension: 4400x34x1.1mm, saw blade tension: torque wrench, max material support weight: 250kg/m, cutting speed: 10-150m/min, lowering speed: 0-600mm/min stepless, material insertion single: 0-600mm, material insertion multiple: 0-6000mm, more details on cutting capacity of flat material and round material see photos from the manual incl. roller spacing: approx. 2 m long Auction-ID: A7-44480-20

Auction-ID: A1-43301-186

A total of 3 units, 2x2 pieces with the dimensions: 2500x550x750 and 1x 3000x550x750 Auction-ID: A7-44480-22

saw blade diameter: 350 mmcutting diameter: Rund 115 mmspeeds: 30/60 U/mintotal power requirement: 2,6 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,0 x 1,0 x 1,8 mIncludes miter adjustment 60° left / 45° rightIncludes 2 x roller conveyors, total 3.0 m (1.5 m each)Includes 6 saw bladesIncludes coolant pumpIncludes base frameIncludes quick-release viseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 conveyor belts with dimensions 2000x550x750, completely without content Auction-ID: A7-44480-23

Technical data: Cutting diameter (Ø): 335 mm Saw blade dimensions: 4400 x 34 x 1.1 mm Table height: 750 mm Smallest diameter: 5 mm Cutting range at 90° (round): 335 mm Cutting area at 90° (flat): 500 x 335 mm Cutting speed: 15 – 150 m/min Clamping range (width / height): 0 – 500 / 15 – 335 mm Material insertion (single / multiple) : 0 – 600 / 0 – 6000 mmIncluding: roller conveyor. 4000 x 640 mm (L/W) Auction-ID: A1-43917-9

Mounting band saw:Cutting range at 90 degrees: around 125 mmCutting range at 90 degrees: square 125 mmCutting range at 90 degrees: rectangular 127 x 125 mmSaw blade dimensions 1435 x 12.7 x 0.6 mmBelt speed 38 - 80 m/minTotal power requirement 0.95 kWMachine weight approx. 18 kgDimensions L x W x H 720 x 380 x 450 m Condition: never used / new (5) Auction-ID: A7-44325-617

Auction-ID: A1-44014-108