saws wood used for sale (1,036)

I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.

The machine is manufactured on request. Can be produced in a length of 5500mm and 5/6 sawing units. Suitable for manufacturers of wooden pallets and small blanks. Motor power 3kW.

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

Multi-blade saw with feed belt, suitable for very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Main engine power: 3 / 4 kW Diameter of the shaft: 50 mm Length of the shaft: 800 mm Width of the feed belt: 800 mm Feed motor power: 0.55 kW Feed speed : 4 - 18 m/min Tool diameter: 300 mm Machine on a system of sliding discs for quick tool change and dimensional adjustment. As additional equipment, it is possible to process short pieces of 150 mm in length. Additional equipment: laser for marking the cut

Rip-off saw for cutting waste material (SLABS). Suitable for processing waste after an angle circular saw. Combined woodworking machine for processing waste material. It offers a two-in-one solution. In one pass, the machine cuts a board from a semicircle (slab), which cuts the spreading unit to the desired, quickly adjustable size. The machine can be used for cutting/deburring prismatic materials, but also for waste processing with one machine. The configuration of the machine and its parameters is carried out by arrangement. Technical parameters of the horizontal unit: Main engine power: 2 x 11 kW Feed motor power: 1.1 kW Minimum height of the starting material: 15 mm Minimum material length: 2000 mm Maximum material length: unlimited Maximum height of the starting material: 100 mm Technical parameters of the vertical unit: Main engine power: 2 x 7.5 kW Minimu ...

Machine for the processing of large-area composite panel materials With this machine you are able to process portrait panel semi-finished products that are otherwise difficult to process We offer you a technology that has already proven itself in practice and works. With this technique you can process semi-finished products up to a maximum height of 220 mm precisely and accurately The technical parameters are queried and measured as required.

An indestructible machine for the toughest conditions. The machine is suitable for processing raw wood. The machine has no inclination. The saw blade is located directly on the motor. Technical parameters: Maximum saw blade diameter: ø 500/mm Power of the main motor: 5.5 kW Main speed of the saw blade: 2850 rpm Maximum cutting height: 85 mm (with 350 mm saw blade) Inclination of the saw unit: NO Dimensions of the iron table: 1050 × 600 mm Aluminium formatting table: 2000 × 360 mm / OPTION 3200 x 360 mm Formatting table for hardened rods (Altendorf principle) Cutting length: 2000 mm Weight of the machine: 450 kg Given the prices of new Chinese machines that cannot withstand the harsh conditions, this machine is the solution. Made in Slovakia in Europe

Fast and efficient machine. The machine is a perfect solution especially for hardwood processors up to a maximum height of about 35 mm, who want to achieve maximum material yield and high work efficiency. Technical parameters: Power of the main motor: 2 x 3 kW or 2 x 4 kW Shaft extension possible: 120 mm Feed belt width: 400 mm Power of the feed motor: 0.55 kW Tool diameter: 300 mm Maximum material height : 35 mm ( change on request ) Minimum material length: on request Small compact cutting sawing machine. The machine is suitable for cutting material with low energy consumption. Individual parameters can be changed on request. KuSING has been manufacturing woodworking machines since 1991.

Cutting saw for cutting waste material. Suitable for processing waste after an angle circular saw. The configuration of the machine and its parameters is by mutual agreement. Technical parameters: Power of the main motors: 2 x 11 kW Power of the feed motor: 0.75 kW Minimum height of the starting material: 15 mm Maximum material length: optional Maximum height of the starting material: optional

2-spindle cross-cut saw for series production for precise shortening of materials. The machine can be manufactured in different versions depending on the specification and requirements. Specifications: Motor power: 2.2kW / 3kW Material length: 500 - 1500 mm Possibility to tilt the discs: YES Machine manufactured on request

Professional formatting saw for solid wood with inclination. Technical parameters: Maximum saw blade diameter: ø 400/30 mm Main motor power: 3 kW (can be 4 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 140 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the iron table: 800 x 550 mm Aluminum formatting sable: 1200 × 360 mm Cutting length: 1200 mm Weight of the machine: 400 kg Description of the machine: 1) Quality casting core 2) Hardened rod formatting table (Altendorf principle) 3) Large cutting height 4) High quality Italian motor with electromagnetic mechanical brake

Heavy format saw KUSING ATLAS 3200 with manual control. Cast iron core with raising of the aggregates by dovetail guides. This core is indestructible and low-maintenance. Technical parameters: Maximum saw blade diameter: ø 450/30 mm ( ø 500/30mm ) Maximum diameter of the pre-cutting disc: ø 120/20 mm Power of the pre-cutting motor: 0.55 kW (0.75 hp) Speed of the pre-cutting disc: 8000 rpm Main motor power: 4 kW (can be 3 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 155 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the cast iron table: 1200 x 700 mm Aluminum formatting sable: 3200 × 385 mm Cutting length: 3200 mm Weight of the machine: 950 kg

Multi-blade saw with feed belt, suitable for the very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Power of the main motor : 3 / 4 kW Diameter of the shaft: 30 mm Length of shaft: 400 mm Width of the feed belt: 400 mm Power of the feed motor: 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 300 mm KuSING has been manufacturing woodworking machines since 1991. Machine in stock.

Small compact Miltirip sawing machine KUSING RP - 200. Technical parameters: Power of the main motor : 7.5 / 11 kW Diameter of the shaft: 30 mm Length of shaft: 200 mm Power of the feed motor : 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 250 / 300 mm Maximum material height: 65 mm Minimum material length: 450 mm ( 250 mm on request ) Small compact Miltirip saw KUSING RP - 200. The machine is suitable for cutting material with low energy consumption. Suitable for cutting raw wood and semi-finished products. KuSING has been manufacturing woodworking machines since 1991. Machine in stock. The advertisement was automatically translated. Translation errors are possible.

I sell a vertical panel saw standing with vorritzer GMC KGS400E, built in 2007, as good as new. Cutting surface 4500x2100mm Engine 3kW. Sawing unit swivel 0-90° Main saw blade diameter 240-250mm / 5200rpm. With vorritzer 104-110 x 20mm / 7000rpm. Manual cutting. Weight 665kg. Condition as new. Available the same.

Saw blade Diameter 350 mm Projection 77 mm Projection 45° 54 mm Clamp opening 84 mm Cutting size 4210x5140 mm