saws wood used for sale (1,057)

Key data: 45 °, 2600 mm, 1350 mm

Sliding table saw VEMA Type FBKS Machine No. 1367 Built in 1994 Saw blade swivel 45° Sliding carriage length 2600 mm Motor power 7.5 kW No scorer Cutting width to the right of the saw blade 1350 mm With table extension and table extension With narrow and wide extraction hood Extraction connection diameter 120 mm Speeds 4000, 5000, 6500 rpm adjustable via belt Saw blade diameter maximum 450 mm Cutting height maximum 155 mm Weight with pallet 980 kg Dimensions 2850 mm x 3500 mm x H 1400 mm Loading dimensions 2850 mm x 2000 mm x H 1600 mm

Key data: 500 mm, 180 mm

Under-table cross-cut saw Cutting width approx. 500 mm Cutting height approx. 120 mm Cross-cut movement from below, continuous from front to back Capping is triggered by foot switch Motor approx. 3 kW Saw blade diameter 500 mm, saw blade HM-tipped Suction connection on the saw body at the back bottom Diam. 100 mm on each side roller conveyor 3000 mm long, roller length 500 mm, Roll diameter 80 mm, roll spacing from center to center 205 mm One roller conveyor with 2 sliding length stops External dimensions: L 6800 mm x W 950 mm x H 1300 mm

Three-function combined table circular saw, slotted hole drilling and milling machine by Kirchner, Leipzig. Without milling arbor. Technical data: Motor: 3 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 1.5 kW Power supply: 220 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 2.2 kW Connection: 16 A / 400 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

The EMMEGI wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts: swivelling Technical data: Motor: 0.55 kW / 220 V Cutting height: approx. 50 mm Cutting depth: approx. 80 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium

Pfeiffer Piccolo pendulum saw with a sturdy roller feed system for cutting boards and beams. The machine is fitted with a pneumatic saw feed mechanism with a safe two-hand operation system. Video available on request. Technical data: Cutting height: max. approx. 120 mm Cutting width: max. approx. 600 mm Roller table: 250+360 cm Feed: Pneumatic Condition: Gebraucht Location: Tauberbischofsheim, Germany

Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: Cutting length: approx. 2,200 mm Mitre angle: 45° – 90° Workpiece: max. 50 × 70 mm Further details: See PDF Condition: Gebraucht Location: Tauberbischofsheim, Germany

Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Technical data: Cutting length: max. 380 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: Cutting height: max. 120 mm Feed length: max. 5,500 mm Cutting width: max. 700 mm Saw blade diameter: max. 700 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table milling machine with feed in a single unit, and comes with a comprehensive range of accessories. Technical data: Motors: 2 Length: approx. 320 cm Width: approx. 140 cm Height: approx. 160 cm Table: swivelling Technical details: on request Condition: Gebraucht Location: Tauberbischofsheim, Germany

Sturdy Pehaka band saw for cutting timber and other materials. Technical data: Roller diameter: 800 mm Motor: 3 kW Clearance height: max. approx. 350 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

The Graule ZS 85 N mitre saw is designed for cutting to length and making mitre cuts: it can be swivelled and tilted. Cutting height 85 mm Cutting length 380 mm Technical data: Motor: 1.5 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Large A. Recker ATS-type mobile timber circular saw for various sawing tasks in workshops or on construction sites. Condition: Gebraucht Location: Tauberbischofsheim, Germany

The Ulmia 1622 table saw is designed for precise rip and cross cuts in solid timber and wood-based materials. Its robust construction ensures reliable performance in craft workshops and general workshops. Ideal for joinery as well as general timber and furniture making. Technical data: Table size: 560 x 710 mm Saw blade diameter: max. approx. 300 mm Motor: 1.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Elektra-Beckum BA S 600 light-duty band saw for cutting timber and other materials. Technical data: Roller diameter: 600 mm Weight: 160 kg Cutting height: max. approx. 300 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

SCM Type M3 multi-blade and trimming circular saw for efficient rip cutting, trimming and cutting to size of solid timber, boards and planks. This robust machine is suitable for precise batch cutting with multiple saw blades and a continuously adjustable chain feed. Technical data: Chain width: 300 mm Cutting height: ~100 mm Engine: 35 PS Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig OptiCut C700 under-table cross-cut saw for the safe and precise cutting of solid timber, particularly hard and heavy timbers with large cross-sections. The machine features a pneumatically guided saw unit, two-hand control and a hold-down device, and is ideally suited for sawmills, timber construction and industrial solid timber processing. Technical data: Saw blade diameter: 550 mm Cutting width: 750 mm Cutting depth: 175 mm Motor: 5.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: Workpiece length: 55–170 mm Workpiece height: max. 27.5 mm Workpiece width: max. 28 mm Milling units: 2 Cross-cut saw: 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Flotjet 2000 table-type circular saw, model 480003, for precise rip, cross and mitre cuts in small pieces of solid timber, sheet materials and plastic. The robust construction, the swivelling table and the integrated sliding table enable flexible and precise workpiece guidance and high cutting accuracy. Suitable for furniture making, interior fit-out and craft workshops. Technical data: Pitch: ~ 650 mm Cutting width: ~ 170 mm Cutting height: ~ 40 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Technical data: Motor: 2 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Second-hand Martin T72 A panel saw for professional cutting work in woodworking. The machine is suitable for typical panel cutting and sawing tasks when working with wood-based materials. Technical data: Cutting height: ~ 145 mm Cutting width: ~ 1,300 mm Cutting length: 3,300 mm Tilt angle: 45° Stop: Digital Adjustment: Electronic Rip fence: Manual Condition: Gebraucht Location: Tauberbischofsheim, Germany

Vertikale (stehende) Plattenaufteilsäge Striebig Typ Automat TRK 6220 AV mit Schneeberger Positron Positioniersteuerung zum präzisen horizontalen und vertikalen Zuschneiden von Holzwerkstoff-, Kunststoff- und Verbundplatten. Die automatische Ausführung ermöglicht rationelle, wiederholgenaue Plattenzuschnitte im Möbel-, Innenausbau- und Plattenbearbeitungsbereich. Freistehende oder Wandmontage möglich. Technical data: Schnittlänge: 5.300 mm Schnittbreite: 2.200 mm Materialstärke: max. 80 mm Motor: 5,5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Panel saw manufactured in 2025. This Wehrmann WT-50/900 is designed for classic cutting of wood and wood-based materials, featuring a maximum panel width of 450 mm and thickness ranging from 8 mm to 40 mm. It includes a user-friendly design with servo-controlled drives and a robust steel frame. If you are looking to get high-quality cutting capabilities, consider the Wehrmann WT-50/900 panel saw we have for sale. Contact us for further details.

IRION Manual Pendulum Saw Adjustment 45° + / - 160 mm cutting thickness Suction connection Motor 7.5 KW Top condition! Immediately available from location

HEMA UH 800 Year 1998 CE marking available Motor power 4 kW Continuously variable drive (Variomatic) Cutting speed: 370 - 1,850 m/min. (infinitely adjustable) Roller diameter: 800 mm max. cutting width: 780 mm Max. cutting height: 500 mm Saw blade length: 5,840 mm Saw blade width: 6 - 50 mm new APA roller guide (Panhans) top + bottom Blade tension indicator Driving device with parking brake Limit switch secured doors Engine brake Extraction connection: D 100 + 120 mm Dimensions: approx. 150 x 120 x 260 cm (W x D x H) Weight: approx. 800 kg Manufacturer information

Key data: 5300 mm, 2200 mm

vertical panel saw Cutting dimension max 5300 x 2200 x 80 mm Motorized evasive rear wall Funding Strip attack

Panel saw manufactured in 1999. This HOLZMA HPV11 features a maximum panel dimension of 2,100 x 4,100 mm and can cut up to 6 panels simultaneously. It includes lifting tables and a Liftomat, along with an automatically height-adjustable clearing table. If you are looking to get high-quality cutting capabilities, consider the HOLZMA HPV11 panel saw we have for sale. Contact us for further details.

Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm Saw blades cannot be swivelled 2 saw motors Motor power approx. 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2000 mm Weight approx. 1300 kg Shipping dimensions approx. 3900 mm x 1300 mm x H 1200 mm