We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (1)
- Assembly presses (1)
- Block presses (3)
- Briquetting presses (31)
- Carcass clamps (13)
- Continuous presses (12)
- Double stand presses (5)
- Edge presses (2)
- Frame presses (19)
- Glue presses (33)
- High pressure presses (1)
- Hydraulic briquetting presses (5)
- Hydraulic presses (22)
- Membrane and vacuum presses (6)
- Membrane presses (7)
- Moulding presses (1)
- Pellet presses (8)
- Pelletizing presses (1)
- Plate presses (2)
- Presses (4)
- Vacuum presses (2)
- Veneer joining machines (1)
- Veneering presses (40)
- Wood presses (1)
- more
- ACMA (1)
- ALBERTI V. (1)
- ALKO WEIMA (1)
- ALTEC (1)
- AMANDUS KAHL (2)
- ANGELO CREMONA (1)
- ARTEL (1)
- ASCOT DIPIU (1)
- BAIONI (1)
- BARGSTEDT/HOMAG (1)
- BLUM AUSTRIA (1)
- BRANDT (2)
- BRUDERER (1)
- BUETFERING (1)
- BURKLE (3)
- Bürkle (2)
- CAMAM (4)
- CASATI (1)
- CF NIELSEN AS (1)
- CMB (2)
- CMC (1)
- Columbus (3)
- COMAFER (1)
- Compactsystem (5)
- COSTRUZIONI NAZZARENO (1)
- CPM (1)
- DIEFFENBACHER (1)
- DIMTER (1)
- DIPIU (3)
- DIPIU ASCOT (1)
- DORNBURG (1)
- EMMES (1)
- ETIENNE (1)
- FALACH (5)
- FEINTOOL (1)
- FIN (1)
- FISMA (1)
- FORMAT4 (1)
- FRITZ / KUPER (1)
- FRIZ (1)
- GRUM-SCHWENSEN (1)
- HüTTENHöLSCHER (1)
- Hess (6)
- HOLZKRAFT (1)
- HOLZPROFI AUSTRIA (1)
- HRB (1)
- HUNGERBüHLER (1)
- HYDRAP (2)
- HYMMEN (1)
- HöFER (1)
- Istra (6)
- Italpresse (14)
- JOOS (6)
- KALLESOE (1)
- KOLMAG - (1)
- Kuper (2)
- Langzauner (2)
- LEDINEK (1)
- LEOPIDA (1)
- LIGMATECH (1)
- LINYI JIANZHONG WOOD (1)
- LISY DVORAK (1)
- MANEA (1)
- MANNI (1)
- MARZANI MACCHINE (1)
- MATEC (1)
- Maweg (2)
- MAWEG HILDEBRAND (1)
- MÜLLER (4)
- N/A (1)
- Nestro (2)
- O.R.E. (1)
- OCMAC (1)
- OMC (2)
- OMC MACHINERY (1)
- Orma (8)
- ORMAMACCHINE (4)
- OTHER (1)
- OTT (4)
- PAKKENS (1)
- PANHANS (1)
- PAWERT SPM (1)
- PELLEGRINI (1)
- Polzer (2)
- POR (1)
- POR ECOMEC (1)
- PTN (1)
- R+S TECHNIK (1)
- R. Colombo (2)
- RAMARCH (4)
- REX KALFASS TORWEGE BARGSTED (1)
- RODEA (1)
- RSN (1)
- RUF (4)
- RVP- (1)
- S+S (5)
- SCHAFBERGER + SPRöDHUBER (1)
- SCHAFBERGER UND SPROEDHUBER (1)
- SCHOEN (9)
- Schuko (2)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 206)
ACMA 1
ALTEC 1
ARTEL 1
BAIONI 1
BRANDT 2
BRUDERER 1
BURKLE 3
Bürkle 2
CAMAM 4
CASATI 1
CMB 2
CMC 1
Columbus 3
COMAFER 1
CPM 1
DIMTER 1
DIPIU 3
DORNBURG 1
EMMES 1
ETIENNE 1
FALACH 5
FEINTOOL 1
FIN 1
FISMA 1
FORMAT4 1
FRIZ 1
Hess 6
HRB 1
HYDRAP 2
HYMMEN 1
HöFER 1
Istra 6
Italpresse 14
JOOS 6
KALLESOE 1
KOLMAG - 1
Kuper 2
LEDINEK 1
LEOPIDA 1
MANEA 1
MANNI 1
MATEC 1
Maweg 2
MÜLLER 4
N/A 1
Nestro 2
O.R.E. 1
OCMAC 1
OMC 2
Orma 8
OTHER 1
OTT 4
PAKKENS 1
PANHANS 1
Polzer 2
POR 1
PTN 1
RAMARCH 4
RODEA 1
RSN 1
RUF 4
RVP- 1
S+S 5
SCHOEN 9
Schuko 2
SCHULER 1
SERGIANI 1
SIMI 1
SORMEC 1
SORMEC- 1
Spänex 4
STROMAB 1
TORWEGGE 1
TRIMWEX 1
Umur 2
VARIOUS 1
WEHMONER 1
Weibert 4
WEIMA 1
Wemhöner 2
WILD 1
WINTER 47
approved
dealer
dealer
Henrik Winter Holztechnik GmbH
Dimensions (L/W/H): 0x0x0 mmWeight: 450 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 3480x1500x2000 mmWeight: 5500 kgTotal power requirement: 2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 6300x1600x2600 mmWeight: 5000 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 2000x1600x1500 mmWeight: 1550 kgTotal power requirement: 11,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 3750x1650x1970 mmWeight: 5000 kgTotal power requirement: 6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 5500x3400x1900 mmWeight: 9000 kgTotal power requirement: 48 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 3450x1550x2950 mmWeight: 4500 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 2600x700x1900 mmWeight: 300 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 3030x360x660 mmWeight: 220 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 3030x450x660 mmWeight: 325 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 4400x4600x3700 mmWeight: 4300 kgTotal power requirement: 3,8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 4400x5000x3700 mmWeight: 4500 kgTotal power requirement: 3,8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 4450x1550x2950 mmWeight: 4800 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 1700x1170x1510 mmWeight: 650 kgTotal power requirement: 6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 4300x1650x2520 mmWeight: 7900 kgTotal power requirement: 108 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 8300x1600x2600 mmWeight: 6000 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 1800x1800x1900 mmWeight: 3000 kgTotal power requirement: 33,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Plate dimensions: 3000x1350 mmDaylight opening: 400 mmNumber of daylights: 1 St.Heating: 31,5 kWSpecific pressure: 2,5-5,0 kg/cm²Total pressure: 90 tMotor output: 1,5 kWDimensions (L/W/H): 3480x1500x2000 mmweight of the machine ca.: 5000 kgYear: Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 4200x1650x2150 mmWeight: 7500 kgTotal power requirement: 54 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 7 tthroat: 180 mmstroke: 100 mmtable surface area: 320x300 mmram surface: Ø110 mmhole in the table: Ø50 mmtable height: 850 mmtool hole in ram: Ø30 mmweight of the machine ca.: 1,5 tdimensions of the machine ca.: BxTxH 1300x1300x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
4 glueing poles, 1 pressing bar, hydraulic,external sizes L x H 3000 x 2000 mm, ca. 200 kg
approved
dealer
dealer
3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...
approved
dealer
dealer
3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...
approved
dealer
dealer
Machine: 3-level deck press gluing star Brand: Altec Type: EB3P-6/18 B (Vario) Year of manufacture: 2000 CE Specifications: Press length: 3,740 mm Pressing units per floor: 3 places Insertion depth: 1,080 mm Press thickness: up to 80 mm Minimum press length: 400 mm Pneumatic pressing pressure: 25,000 N to 35,000 N at 10 bar Pneumatic hold-down devices: instead of mechanical (was an optional accessory) 18 pieces Pressure beams per working level: 6 x 600 mm Useful stroke: 50 or 80 mm Star rotatable: with hand crank Height: 1,900 mm Depth: 1,680 mm Length: 4,320 mm Weight: 1,700 kg
approved
dealer
dealer
Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table
approved
dealer
dealer
• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...
approved
dealer
dealer
CNC – controlled frame gluing press for automatic gluing of all frame constructions with dowel connection – tine connection – 45° miter connection, automatic centering of the press plates and the upper press beam. The frame presses are available in the following sizes – pressing area 3,000 x 1,700 mm – 3,000 x 2,000 mm and 3,500 x 2,500 mm. Two vertical press cylinders – pressing force per cylinder 7 tons (optional four vertical press cylinders). Two horizontal press cylinders, stroke range 150 mm - pressing force per cylinder 3 tons. Maximum tread depth 130 mm (larger tread depths on request). CNC control from SIEMENS® with touch screen for calling up three automatic pressing cycles, 99 compression programs can be stored per pressing cycle. Among other things, the following parameters can be programmed: frame size, frame profile structure, pressing time, pr ...
